Tool wear and spring back analysis in orthogonal machining unidirectional CFRP with respect to tool geometry and fibre orientation

Abstract

Machining abrasive carbon fibre reinforced polymers (CFRP) is characterised by extensive mechanical wear. In consequence, the cutting edge micro-geometry and thus the tool/material contact situation are continuously changing, which affects process forces and machining quality. As a conclusion, a fundamental understanding of the tool wear behaviour and its influencing factors is crucial in order to improve performance and lifetime of cutting tools. This paper focuses on a fundamental tool wear analysis of uncoated tungsten carbide cutting inserts with different combinations of fibre cutting angles and tool geometries. For this purpose, orthogonal machining experiments with unidirectional CFRP material are conducted, where the wear progression of the micro-geometry is investigated by means of five wear parameters lα, lγ, γ*, α*, and bc. For detecting the actual contact zone of the cutting edge and to measure the elastic spring back of the material, the flank face is marked via short pulsed laser processing. Furthermore, the process forces and the wear rate are measured. It is shown that the material loss due to wear clearly varies along the tool’s contact region and is highly dependent on the clearance angle and the fibre cutting angle Φ, while the influence of the tested\xa0rake angles is mostly negligible. Especially in machining Φ=30° and Φ=60°, a strong elastic spring back is identified, which is more intense for smaller clearance angles. For all tested configurations, the material’s elastic spring back increases in intensity as wear progresses which, in combination with the decreasing clearance angle, is the main reason for\xa0high thrust forces.