Physical, chemical, and mechanical properties of landfilled waste from Campina Grande, Brazil

Abstract

The properties of municipal solid waste (MSW) in landfills vary considerably, depending on the waste’s composition, time, and density. This variability in MSW properties leads to many uncertainties in the analysis of landfill performance. Therefore, this study aimed to evaluate landfilled waste’s physical, chemical, and mechanical properties for 8 days. Throughout this study, it was possible to investigate the gravimetric composition, density of solid particles, moisture content, volatile solids, pH, total alkalinity, chemical oxygen demand (COD), ammoniacal nitrogen (N-NH3), grain size distribution, compaction properties, and shear strength of the landfilled waste. It was found that 71% of the waste corresponds to the denominated “others” category, the content of fine materials is 65%, the optimum water content is 34%, the moisture content is 41%, and the volatile solids is 67%. The chemical parameters indicated that the MSW was in the initial phase of biodegradation (acidogenesis), as the pH, total alkalinity, COD, and N-NH3 showed to be 5, 1575 mgCaCO3.L−1, 13698.6 mgO2.L−1, and 56 mgN-NH3.L−1, respectively. On the mechanical aspect, the waste presented a cohesion of 17 kPa and an internal friction angle of 16°. In general, the results showed that the waste’s physical, chemical, and mechanical properties altered during the landfilling process.