Graphite fluoride as a new oxidizer to construct nano-Al based reactive material and its combustion performance

Abstract

Abstract Reactive materials consisting of aluminum (Al) and fluorine-containing oxidizers have been extensively developed owing to high energy density and potential applications in propellants and explosives. Herein, graphite fluoride (CF) as a new fluorine-containing oxidizer was introduced to construct nano-Al based reactive materials. Systematic investigation and comparison were executed on exothermic reaction behavior and combustion performance of nano-Al/CF and nano-Al/polytetrafluoroethylene (PTFE) based reactive materials. The energy output and exothermic peak of nano-Al/CF were approximately 2367\xa0J/g and 641\xa0°C, which were 300\xa0J/g and 85\xa0°C higher than those of nano-Al/PTFE, respectively. The effects of nano-Al/CF mass ratio and packing density on burning rates were examined to fully understand combustion reaction and flame propagation behavior. Nano-Al/CF exhibited excellent burning rate (1670\xa0m/s), much higher than that of nano-Al/PTFE (930\xa0m/s). More interestingly, flame splitting phenomenon including three distinct flame regions was observed on the critical position with the highest burning rate for nano-Al/CF with the mass ratios of 25/70 and 30/75. The burning rate of nano-Al/CF increased and then decreased with the packing densities ranging from 20.87% to 53.47% TMD. The dominating combustion reaction products (AlF3 and C) were further determined to figure out the reaction mechanism. These results demonstrated that CF as fluorine-containing oxidizer to construct reactive materials has potential applications in propellants, explosives and pyrotechnics.