Centrifuge and numerical model studies on the behaviour of geogrid reinforced soil walls with marginal backfills with and without geocomposite layers

Abstract

Abstract The aim of this paper is to study the effect of geocomposite layers as internal drainage system on the behaviour of geogrid reinforced soil walls with marginal backfills using centrifuge and numerical modelling. A series of centrifuge model tests were carried out using a 4.5\u202fm radius beam centrifuge facility available at IIT Bombay. A seepage condition was imposed to all models to simulate rising ground water condition. Displacement and pore water pressure transducers were used to monitor the performance of all centrifuge models. A geogrid reinforced soil wall without any geocomposite layer experienced catastrophic failure soon after applying seepage due to the development of excess pore water pressure within the reinforced soil zone of the wall. In comparison, reinforced soil wall with two geocomposite layers at the bottom portion of the wall was found to have a good performance at the onset of seepage and by embedding four geocomposite layers up to the mid-height of the wall from bottom as a result of lowering phreatic surface much more effectively. For analysing further the observed behaviour of centrifuge model tests, stability and seepage analysis were conducted using SLOPE/W and SEEP/W software packages. A good agreement was found between the results of numerical analysis and observation made in centrifuge tests. The effect of number of geocomposite layers as well as its transmissivity was further analysed using parametric study. The results of parametric study revealed that the number of geocomposite layers plays a main role on the good performance of the geogrid reinforced soil walls with marginal backfill.