Decorated wood fiber/high density polyethylene composites with thermoplastic film as adhesives

Abstract

Abstract It is difficult for wood fibers/high density polyethylene (WF/HDPE) composites to laminate with poplar (Populus tomentosa) wood veneer due to its nonpolar and imporous surface. In present study, four types of thermoplastic films, include two sorts of chlorinated polypropylene (CPP32 and CPP22) film and a mixture film of maleic anhydride grafted polyethylene (MAPE) and HDPE, were developed to glue poplar wood veneer onto WF/HDPE composite board under heat-pressing. The intermediate layer has well water resistance when used aforementioned films. Optical microscopy and scanning electron microscopy (SEM) results show that CPP32 with higher melt flow rate had the higher permeability into poplar wood and fitness with WF/HDPE surface than CPP22; accordingly, the bonding strength of CPP32 was higher than CPP22. MAPE/HDPE film formed the strongest bonding layer for the high compatibility with the WF/HDPE surface which confirmed using SEM, and the covalent bonding between the poplar veneer and MAPE were confirmed using fourier transform infrared (FTIR). Compared to the high heat-press temperature of MAPE/HDPE, CPP32 has the lower processing temperature and acceptable bonding strength. CPP32 and MAPE/HDPE film both suited as the bonding intermediary to substitute traditional adhesive to manufacture veneered wood-plastic composite boards.