Laser powder bed fusion of a pure tungsten ultra-fine single pinhole collimator for use in gamma ray detector characterisation

Abstract

Abstract Laser Powder Bed Fusion is a leading additive manufacturing technology, whose use has been recently extended to refractory metals such as tungsten. This work was carried out to manufacture a pure tungsten pinhole collimator that would otherwise be difficult to produce using conventional methods such as machining. The laser powder bed fusion process was used to produce an ultra-fine 0.5\u202fmm diameter hole running along a 40\u202fmm long beam stop component. A laser powder bed fusion scanning strategy (laser energy density of 348\u202fJ/mm3) was selected with the aim of fabricating a high density tungsten component. The manufactured collimator was then used for gamma-ray detector characterisation. A collimated gamma-ray using a 241Am source mounted on an automated scanning table was used to study the gamma-ray interaction with respect to position in a semiconductor detector, so that the position-dependent charge collection process could be characterized. The 0.5\u202fmm diameter fine tungsten collimator yielded a relatively narrower beam spot, leading to more accurate scan results. However that was at the expense of number of gamma rays detected per second. Overall, the 0.5\u202fmm collimator allowed for higher resolution scans giving better detector characterisation results in comparison to a 1\u202fmm diameter collimator.