Feasibility of 3D printed Co–Cr alloy for dental prostheses applications

Abstract

Abstract The aim of this study was to characterize the surface, microstructural, mechanical, and electrochemical properties of Selective Laser Melting (SLM) 3D-printed Co–Cr alloy when compared with casting and Soft Metal Block (SMB) milling techniques for dental prostheses applications. Specimens with specific dimensions were fabricated by cast, SMB, and SLM technologies with their respective commercially available Co–Cr alloys. Several techniques were carried out to characterize the specimens in terms of surface morphology, chemical composition, microstructure, surface free energy, and mechanical properties. Metal-ceramic bond strength was evaluated with the 3-point bend test. Standard electrochemical tests were conducted in artificial saliva (pH of 6.5). Data were evaluated at a significance level of 5%. Similar microstructure patterns (γ-phases and e-phases), surface morphology, roughness, and surface free energy were observed among groups (p>0.05, ANOVA). The elemental composition provided by energy-dispersive spectroscopy confirmed the manufacturer’s information on the alloys used. SLM technology provided a fine-grained homogeneous and less porous microstructure. X-ray photoelectron spectroscopy analysis suggested a thicker oxide film on SLM surfaces. Highest values of Vickers microhardness, flexural strength, elastic modulus, and metal-ceramic bond strength were found for the SLM group (p