Evaluation of BDS-2 real-time orbit and clock corrections from four IGS analysis centers

Abstract

Abstract Real-time precise orbit/clock product is fundamental to BeiDou Navigation Satellite System (BDS) real-time precise point positioning (PPP). In order to explore achievable performance of BDS real-time orbit/clock products and thus offer usage recommendations for BDS real-time PPP users, this paper studies BDS real-time orbit/clock corrections provided by four International GNSS Service (IGS) Analysis Centers (ACs), i.e. Wuhan University (WHU), Deutsches Zentrum fur Luft- und Raumfahrt (DLR), GeoForschungsZentrum Potsdam (GFZ) and Centre National d’ Etudes Spatiales (CNE) for seven consecutive days staring from day of year (DOY) 324, 2019. Firstly, the availability of BDS-2 real-time orbit/clock corrections is studied. Larger than 85% availabilities are identified for all ACs. During the test period, DLR does not provide all Geosynchronous Earth Orbit (GEO) satellites’ corrections, whereas CNE does not provide C14/C16′s corrections. Secondly, the BDS real-time orbit accuracy is analyzed. Results indicate that the real-time orbit accuracy of GEO satellites is at meter level, and those of Inclined Geosynchronous Satellite Orbit (IGSO)/Medium Earth Orbit (MEO) satellites are at decimeter level. Among all ACs, the accuracy of CNE’s three-dimensional (3D) orbit correction is the best, which is 2.391/0.278/0.271\xa0m for GEO/IGSO/MEO satellites, respectively. DLR has the largest orbit errors of 1.116/0.504\xa0m for IGSO/MEO satellites. Thirdly, the BDS real-time clock offset precision is investigated. On the one hand, CNE’s real-time corrections still perform best with 1.19/0.28/0.32\xa0ns clock offset precision for GEO/IGSO/MEO satellites, respectively. On the other hand, DLR’s real-time clock is the worst with 2.61/1.91\xa0ns IGSO/MEO clock offset precision. Finally, all corrections are applied to estimate 47 Multi-GNSS Experiment (MGEX) station’s BDS-2 real-time PPP on DOY 330, 2019. Results show an average of 0.53–1.46\xa0h convergence time and 8.8–10.9\xa0cm positioning accuracy in the static mode. In the meantime, the average convergence time in the kinematic mode is 2.11–9.84\xa0h, much longer than the static counterpart. The corresponding converged positioning accuracy is 30.7–68.0\xa0cm. To sum up, WHU/GFZ/CNE’s real-time corrections are proven with satisfied orbit/clock performance, thus are recommended for BDS-2 real-time PPP.