Heterogeneous creep deformation in Dissimilar Metal Welds (DMWs)

Abstract

Abstract Dissimilar Metal Welds (DMWs) made between ferritic low alloy steels and austenitic alloys are widely used in high temperature components of nuclear and fossil energy power plants. Literature shows that these bimetallic welds fail prematurely by creep mechanism close to the interface of the ferritic (BCC) and austenitic regions (FCC), with lifetimes much less than the creep lives of both materials. These creep failures are associated with cavity formation close to BCC/FCC interfaces. However, the spatial and temporal variations of creep strain rates in these DMWs have not been measured. In this research, DMW coupons were fabricated between 2.25Cr-1Mo steel and Alloy 800\u202fH base material using a Ni base Inconel weld consumable. These samples were aged at 600\u202f℃ for 2000\u202fh and 4000\u202fh to induce two different sizes and distributions of Type I interfacial carbides and further subjected to a short term (~1 month) creep testing. Surface strains were measured with Digital Image Correlation (DIC) technique to extract local creep strain rates. In both samples, creep strain concentration occurred in the BCC matrix. The location of creep strain concentration from the BCC/FCC interface, changed from 5\u202fµm (2000\u202fh aged condition) to 400\u202fµm (4000\u202fh aged condition) depending on the initial carbide distributions in these regions.