Precision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology | 2019
Functionality characterization of injection moulded micro-structured surfaces
Abstract
Abstract Micro-structured surfaces are increasingly being used on parts and products to embed functional properties that could be optical, electrical, thermal, or likewise. In this work, directional optical properties were achieved on plastic with a microstructure composed of a close array of ridges, defined by a constant width and by the angle with respect to the normal of the generative surface. Under constrained lighting, the reflectance was maximized from a certain viewing angle and direction, and minimized from its horizontally orthogonal position. The purpose was the generation of quick response codes that could be easily scanned by means of commercially available software, e.g. smartphone applications, or professional equipment for identification or embedding specific information within the sample parts. To evaluate the functionality, defined as the generated light contrast from contingent micro ridges, the replicates were characterized by means of a robot assisted vision system, provided with a light source and a camera, used as a gonioreflectometer. The contrast was then correlated to the replication quality, i.e. the deviation of three defining parameters of the structures from the mould insert, thus determining the best processing conditions. The results showed that high injection speed, 60\u202f°C mould temperature and 100\u202fMPa packing pressure were required to achieve optimal replication and generated contrast: large variations in the surface functional behaviour were present even for small differences between the parts. However, an empirical approach highlighted that even for processing parameters that were less likely to promote replication, sufficient information decoding was achieved.