Separation and Purification Technology | 2021
Solvometallurgical process for the recovery of rare-earth elements from Nd–Fe–B magnets
Abstract
Abstract The protic ionic liquid pyridinium chloride is known to be a non-aqueous solvent for metal oxides, including rare-earth oxides. However, its application in extractive metallurgy and especially in solvent extraction has been so far limited by its miscibility with the aqueous phase. In this paper, molten pyridinium chloride (165\xa0°C) was used to dissolve production scrap of Nd–Fe–B permanent magnets to recover the valuable metals neodymium and dysprosium. The Nd–Fe–B scrap powder completely dissolved in just 10 min with a liquid–to–solid ratio of 10\xa0g\xa0g–1. Afterwards, non-aqueous solvent extraction was performed at high temperature (165\xa0°C) by using molecular extractants (PC-88A, Cyanex 923) or ionic liquids (Cyphos IL 101). The temperature affects the equilibrium constants and, hence, the distribution of the metals between the two phases. Moreover, high temperatures lower the viscosity of the solvents, so that they can be used in undiluted form. In the first stage, 30\xa0vol.% PC-88A in p-cymene was used to extract dysprosium(III), whereas in the second stage 100\xa0vol.% PC-88A was used to extract most of the neodymium(III). Finally, the synergistic mixture Cyphos IL 101–Cyanex 923 70:30 (wt.:wt.) was shown to efficiently extract iron(II,III) from the concentrated leachate. A conceptual flowsheet was designed, which included the recycling of the pyridinium chloride to lower the costs and the environmental impact of the process.