The fundamental mechanisms of wear of cemented carbide in continuous cutting of medical grade cobalt chromium alloy (ASTM F75)

Abstract

Abstract Medical grade cobalt chromium alloys are one of a select number of material types approved for use in the components of orthopaedic implants. However, there has been minimal published research into the fundamental mechanisms in the cutting processes used in their manufacture. These processes affect the form accuracy, surface finish and integrity of these safety critical devices. The present work reports on a scientific investigation into the fundamental mechanisms of tool wear in continuous cutting of the biomedical grade Co-Cr-Mo ASTM F75 alloy using uncoated tungsten carbide tools. Confocal and scanning electron microscopy (SEM) is used to examine and characterise the progression of tool wear at intervals up to a defined “end of life limit” for each combination of speed ( v c ) and feed rate (f) in experiments where the range of these parameters vary from 20 to 60\u2009m/min and 20–60 μm/rev respectively to reflect the ranges used in industry. An empirical model is then established for progressive tool wear which demonstrates that the wear rates vary by over an order of magnitude. The parameters for the Taylor equation are also determined for this material for the first time. Microscopic examination shows the presence of characteristic tool wear “zones” with consistent size, shape and composition. These zones evolve depending on combination of speeds and feeds as determined in the full factorial experiment. Detailed characterisation of the wear surfaces and cross sections provide a number of insights into the possible mechanisms of wear. It is hypothesised that micron thick layers of Co-Cr-Mo, found on the rake and flank wear surfaces, indicate primary wear mechanism involving adhesion of the work material and subsequent removal of WC hard particles by entrainment in the work material flow.