Numerical and experimental research on cross wedge rolling hollow shafts with a variable inner diameter

Abstract

Abstract The precise forming of inner hole has been a major technical difficulty in the cross wedge rolling (CWR) of hollow shaft. This paper proposes a new process to form hollow shafts with variable inner diameters by using the CWR with mandrel control. The forming characteristics and dimension precision of this process are analyzed by combining finite element modelling (FEM) and forming trials. The hole step of hollow shaft with variable inner diameter is formed in a spiral pattern. The helixes result in many micro-steps in hole step when forming the right-angle inner step. The metal flow lines demonstrated that mandrel step hindered the axial metal flow of inner hole and the metals were accumulated in hole step. The rolling load increases in the process of forming hole step. The mandrel is subjected to axial load when hole contacts the mandrel step. The roundness can be improved by reducing the mandrel diameter in knifing position. The axial accuracy of inner diameter can be classed as three parts: hole expansion, stable rolling, hole shrinkage. The compensated mandrel was designed to improve axial precision of inner diameter. The results showed that the inner hole dimension can be effectively controlled.