Engineering Fracture Mechanics | 2021
Impact of microstructural properties on the crack threshold of aluminium castings
Abstract
Abstract This work focuses on the technological size effect of the cast aluminium alloy EN-AC 46200. Herewith, specimens inheriting specific local cooling rates and therefore varying local dendrite arm spacings are taken from crankcases with hot isostatic pressing (HIP) post-treatment. In order to evaluate the statistically distributed microstructural properties, the dendrite arm spacing λ 2 is probabilistically assessed. Thus, the λ 2 values follow the lognormal distribution, detached of local solidification times. Crack propagation tests are conducted at varying load ratios, such that the impact of the microstructure by means of λ 2 is evaluated. The statistically assessed investigations propose the intrinsic crack threshold to be independent of microstructural properties, in opposite to the long crack threshold which is significantly affected by varying λ 2 values due to enhanced crack closure effects. The evaluated cyclic R-curve results can be generalized into a microstructural independent manner. Moreover, the load ratio effect and its convolution with microstructural properties is evaluated based on the Newman approach. The linear extrapolation of the newly raised three-dimensional Newman approach, considering arbitrary λ 2 values as technological effect, is validated by literature data and the proposed stress intensity factor threshold course is revealed to be slightly conservative by about twelve percent on average.