Intrinsic low sodium/NASICON interfacial resistance paving the way for room temperature sodium-metal battery.

Abstract

Sodium-metal batteries have strong potential to be utilized as stationary high energy density storage devices. Owing to its high ionic conductivity, low electronic conductivity and relatively easy fabrication, NASICON-structure electrolyte (Na3Zr2Si2PO12) is one of the potential candidates to be considered in the solid-state sodium-metal batteries at room temperature. However, the large interfacial resistance between the solid-state electrolyte and the metallic sodium is known to limit the critical current density (CCD) of the cell. In this study, a simple and cost-effective annealing process is introduced to the electrolyte preparation to improves its interface with metallic sodium. X-ray photoelectron spectroscopy and scanning probe microscopy show that Si forms bonds with the surface functional groups when exposed to the ambient condition. With the removal of surface contamination as well as a partially reduced electrolyte surface, the annealed electrolyte shows an extremely small interfacial resistance of 11\xa0Ω\xa0cm2 and a high CCD of 0.9\xa0mA\xa0cm-2. This study provides an insight on the electrolyte surface preparation and its significant in a sodium-metal solid-state battery.