A comparative study on the electrical and tribological characteristic of magnetron sputtered Ag, Cu and Al films under current-carrying friction

Abstract

\nPurpose\nThe purpose of this paper is to compare the electrical conductivity and tribological properties of magnetron sputtered silver (Ag), copper (Cu) and aluminum (Al) thin films under conductive grease lubrication.\n\n\nDesign/methodology/approach\nThree types of silver (Ag), copper (Cu) and aluminum (Al) thin films were prepared by magnetron sputtering. Current-carrying friction tests were carried out by a ball-on-plate reciprocating friction and wear tester. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) were used to observe and analyze the worn surface and cross-section morphology of the films.\n\n\nFindings\nSilver and Cu films exhibited good conductivity and tribological properties, which were mainly attributed to the synergy of the protective tribofilm generated by conductive grease, current-induced thermal effect and magnetron sputtered films effect. Al film was worn through. Large pitting storing lubricate were only found in Ag film. Cu film showed a similar surface uniformity with Ag film.\n\n\nOriginality/value\nThis study provides a reference for the design and application of conductive grease and investigates the current-carrying friction behaviors of magnetron sputtered films as electrical contact materials. The comparison of current-carrying friction behaviors of the three films was rarely covered in previous studies.\n