Development of an Actuator Line Model for Simulation of Floating Offshore Wind Turbines

Abstract

\n This study focuses on developing and applying an actuator line model (ALM) to predict the wake behind floating offshore wind turbines (FOWTs). A computational method is presented which implements an ALM, able to handle 6 Degree-of-Freedom (DOF) motion dynamics, coupled with a CFD solver. Computational grides used are cubic and do not require a boundary layer mesh. Results show that just about 300k grids are necessary for performance assessment of the NREL Phase VI case. Therefore, the proposed method leads to significantly lower computational cost and easier preprocessing compared to high-order methods used for solving RANS. On the other hand, coupled aerodynamic and motion analyses showed that pitch and surge motions have the most considerable influence on turbine performance due to their inherent effect on 3D local wind inclination in the relative frame. The peak power happened when the platform is in its initial position, where the platform motion velocity is maximum. Finally, it is shown that the wind turbine movement has a considerable effect on its wake characteristics. The gap distances between wake rings can also change wake interactions, and, for the case with platform pitch motion, the condition of the wake is even more complicated as such distance is not the same in all azimuthal sectors. The results show that the applied ALM method is beneficial for simulating the wake behind offshore wind turbines and the complex phenomena in the wake due to platform oscillation.