Numerical Simulation on the Influence of Rotating Speed on the Hydraulic Loss Characteristics of Desalination Energy Recovery Turbine

Abstract

The performance of energy recovery turbine (ERT) directly determines the cost and energy consumption of reverse osmosis desalination. In order to study the performance and loss mechanisms of ERT under different conditions, the external characteristics and the losses of different components were quantitatively analyzed. The loss mechanisms of each component in the turbine were revealed through the comparative analysis of the internal flow field. The results show that the efficiency is 2.2% higher than that at the design speed when turbine runs at n\u2009=\u200922000\u2009r/min. The impeller losses account for more than 67% of the total losses. The impeller loss is mainly observed at the leading edge. The vortex on the pressure side of the leading edge is caused by the impact effect, while the vortex on the suction side of the leading edge is caused by the flow separation. With the increase in the rotating speed, the loss caused by flow separation in impeller decreases obviously. The volute loss is mainly observed near the tongue, which is caused by the flow separation at the tongue. The design of the tongue is very important to the performance of the volute. The turbulent kinetic energy (TKE) and loss decrease with the increase in the rotating speed. The loss in the draft tube is mainly observed at the inlet core. With the increase in the rotating speed, the turbulence pulsation and the radial pressure fluctuation amplitude reduce. Therefore, the turbine can be operated at the design or slightly higher than the design rotating speed under the condition that both the hydraulic condition and the intensity are satisfied, which are conducive to the efficient utilization of energy.