Research on Plugging Mechanism and Optimisation of Plug Removal Measure of Polymer Flooding Response Well in Bohai Oilfield

Abstract

\n Since the field test of polymer flooding technology was carried out in the Bohai Oilfield in 2003, problems such as plugging of polymer-response wells have become increasingly worse, and conventional acidizing and plugging removal measures have had poor results. Therefore, this paper carries out research to provide a basis for effective plug removal in oil wells, to improve the productivity of polymer flooding oil wells.\n In this paper, the component analysis of the plug samples from the benefit injection wells in the field was carried out. The clogging mechanism was studied through X-ray diffraction, scanning electron microscopy, energy spectrum analysis, infrared spectroscopy, and chromatography, as well as through dynamic simulation evaluation of plugs and dynamic displacement experiments of long cores. Through simulation experiments, the clogging mechanism is clarified and the blockage radius range was obtained by various methods such as inverse effect of comprehensive measures, well test interpretation, and empirical formula calculation.\n The analysis results of the plugs show that the inorganic components of the plugs are calcium and magnesium carbonate scales, clay minerals and iron salt precipitation, and the organic components are the micelles formed by the crosslinking of trivalent metal ions. The greater the concentration of polymer produced, the greater the strength of calcium-magnesium scale aggregates and aluminum-iron-colloid elastomer, the greater the degree and depth of reservoir pore throat clogging, the larger the screen clogging area, which will even block the inlet of electric submersible pump. This will result in poor acidizing plugging effect and rapid decline in oil well productivity. Through various methods such as the inverse effect of comprehensive measures, well test interpretation, and empirical formula calculation, the blockage radius of polymer flooding response wells is greater than 4 meters. Based on this understanding, in the five wells plug removal measures, the unblocking radius and unblocking chemical agent system were adjusted and optimized. On-site application effect tracking shows that the plug removal measures have achieved good oil incremental effects, and the measures are all effective.\n Through the classification and comparison of oil well productivity characteristics, formation water composition, output polymer properties and other characteristics, this paper established the identification mark of plugging of polymer-response wells. In addition, an analysis method for clogging was established to clarify the composition and formation mechanism of the clogging. Finally, the plug radius calculation method was established by means of backstepping the effects of plug removal measures and well test interpretation analysis.