The influence of the stratum structure of the pipe pile sliding pile of the offshore platform

Abstract

This article has carried on the theoretical analysis to the generation mechanism of the sliding pile phenomenon. A certain prediction was made on the causes of slipping piles and their influencing factors. At the same time, it is based on the collected field measurement data, an engineering example is selected to briefly analyze the changes in the bearing capacity of the pile foundation after the sliding pile occurs. It is found that the influence of the sliding pile on the bearing capacity of the pile foundation is mainly the influence on the side friction resistance of the pile, and the reduction of the soil resistance is also mainly due to the reduction of the side friction resistance of the pile. Finally, using ABAQUS finite element analysis software, a numerical simulation analysis was carried out on the changes of the stratum structure, the analysis results show that the position change of the soft soil layer has a certain influence on the bearing capacity of the pile, but it does not change the settlement of the pile top under the limit state; The greater the strength of the supporting layer, the greater the bearing capacity and the greater the displacement when reaching the limit state; The length of the slipped pile does not affect the bearing capacity of the pile foundation, and the farther the slipping occurs from the bearing layer, the smaller the impact on the bearing capacity of the pile foundation. Therefore, in the actual project, attention should be paid to the selection of the bearing layer and the soft soil layer close to the bearing layer should be removed to reduce the impact of the slipping pile on the bearing capacity of the pile foundation and ensure that the bearing capacity of the pile foundation meets the design requirements.