Editorial: Signal Processing for Beyond 5G Non-Terrestrial Networks

Abstract

Signal processing has long been playing an essential role in wireless terrestrial and satellite communications. Terrestrial networks are deploying new 5G based networks in various frequency bands, some of those in millimetre waves, the traditional realm of satellite networks, so that flexible mechanisms of sharing and coexistence will become more relevant. At the same time, the advent of new non-terrestrial wireless solutions such as High Altitude Platforms or highly dense Low Earth Orbit (LEO) constellations is positioning nonterrestrial networks (NTN) for a more decisive role in global data provision and ubiquitous coverage. However, a full integration between terrestrial and non-terrestrial networks is still not present; the 3rd Generation Partnership Project (3GPP) has concluded some initial studies on the role of NTN in 5G, a Work Item is expected to finalize in 2021, andNTN standardization in 5G is expected to take place in 3GPP Releases 17 and 18. It is likely that for some years to come, both networks will still remain complementary, with a potential real integration given by the timeframe of 6G, where NTN is considered key in providing connectivity to rural and underprivileged areas. There is a strong need for signal processing R&D in the new NTN, which at the same time helps to close the bridgewith terrestrial networks: the farther awaywemove from the physical layer, themore commonalities can be found between space and terrestrial segments. The sharing of radio frequency bands and the dynamic usage of resources allow to operationally reconfigure network connections. In this context, the signal processing in the transmitters, receivers, and network control systems face significant requirements to access frequency resources dynamically, detect interference, optimize the network configuration, and configure the radio resources operationally. Signal processingmust be used to leverage the flexibility of resource allocation in NTN, including GEO, MEO and LEO satellites, aerial platforms and even unmanned aerial vehicles (UAV). Four contributions have been included in this collection to illustrate the key role of signal processing at the interplay with networking, scheduling and antenna technology. The paper “Precoding with Received-Interference Power Control for Multibeam Satellite Communication Systems” (Lagunas et al.) builds on classical zero-forcing based precoders to propose a new scheme to reduce the sensitivity to the user scheduling, making it also possible to operate under overloaded conditions. As the number of beams increases, and aggressive frequency reuse is desired to get the most out of the scarce available spectrum, techniques like that exposed in this paper can help to bridge the gap between user scheduling and physical layer methods. The paper “Field Trial on 5G New Radio over Satellite” (Völk et al.) contributes with a practical testbed, featuring the use of a GEO satellite for backhauling a 5G mobile node. A commercial off-the-shelf 5G user terminal was connected to the core network through a mobile edge node operating on a satellite link on the Ku-band. Even though the lack of integrated standardization between terrestrial and satellite systems limits the performance, we can expect a tighter integration in beyond 5G and,most likely, 6G systems, so that even seamless operation making use of both terrestrial and satellite links will be possible. Edited and reviewed by: P. Takis Mathiopoulos, National and Kapodistrian University of Athens, Greece