Archive | 2019
Análisis topológico de los cables en un modelo de torre atirantada
Abstract
espanolLas torres atirantadas son estructuras ampliamente empleadas en el area de las telecomunicaciones para soportar antenas a grandes alturas. Estas estructuras son sensibles a las cargas de viento y presentan un indice de fallo elevado frente al paso de fuertes vientos. En el comportamiento estructural de estas torres intervienen diversos factores como la topologia de los cables (cantidad de cables en la torre, cantidad de cables por anclaje, angulo de los cables con relacion al fuste), la tension de los cables en el momento de actuar la carga de viento y tambien la presencia de sistema reductores de la torsion, llamados antitorsores. En este trabajo se investiga mediante modelos de elementos finitos en SAP2000, el efecto que ejercen la topologia de los cables y la presencia de los sistemas de reduccion de torsion (antitorsores) a diferentes alturas en el comportamiento estructural de un modelo tipico de torre atirantada, teniendo en cuenta las caracteristicas dinamicas de la carga de viento, asi como la no-linealidad geometrica de la estructura. EnglishGuyed towers are structures commonly used in the area of telecommunications for support antennas at high altitudes. The failure rate of this structural type with respect to others of similar complexity is high. Many factors are involved in the structural behaviour under the action of extreme winds. Cable topology (number of cables in the shaft, angle of cables respect to the shaft, number or anchors), tension of cables and torsion reduction systems are very significant in the response of these structures to wind forces. This study aims to investigate the effect of the topology of the cables and the torsion reduction system on the structural behaviour of a typical tower model using the finite element method with the SAP2000 software, taking into account the dynamic characteristics of the wind load and the non-linearity of the structure.