Electrical Engineering And Systems Science

Chirp spread spectrum (CSS) is the modulation technique currently employed by Long-Range (LoRa), which is one of the most prominent Internet of things wireless communications standards. The LoRa physical layer (PHY) employs CSS on top of a variant of frequency shift keying, and non-coherent detection is employed at the receiver. While it offers a good trade-off among coverage, data rate and device simplicity, its maximum achievable data rate is still a limiting factor for some applications. Moreover, the current LoRa standard does not fully exploit the CSS generic case, i.e., when data to be transmitted is encoded in different waveform parameters. Therefore, the goal of this paper is to investigate the performance of CSS while exploring different parameter settings aiming to increase the maximum achievable throughput, and hence increase spectral efficiency. Moreover, coherent and non-coherent reception algorithm design is presented under the framework of maximum likelihood estimation. For the practical receiver design, the formulation of a channel estimation technique is also presented. The performance evaluation of the different variants of CSS is carried out by inspection of the symbol error ratio as a function of the signal-to-noise ratio together with the maximum achievable throughput each scheme can achieve.

Wide-area synchrophasor ambient measurements provide a valuable data source for real-time oscillation mode monitoring and analysis. This paper introduces a novel method for identifying inter-area oscillation modes using wide-area ambient measurements. Based on multivariate empirical mode decomposition (MEMD), which can analyze multi-channel non-stationary and nonlinear signals, the proposed method is capable of detecting the common oscillation mode that exists in multiple synchrophasor measurements at low amplitudes. Test results based on two real-world datasets validate the effectiveness of the proposed method.

Many technologies for human-computer interaction have been designed for hearing individuals and depend upon vocalized speech, precluding users of American Sign Language (ASL) in the Deaf community from benefiting from these advancements. While great strides have been made in ASL recognition with video or wearable gloves, the use of video in homes has raised privacy concerns, while wearable gloves severely restrict movement and infringe on daily life. Methods: This paper proposes the use of RF sensors for HCI applications serving the Deaf community. A multi-frequency RF sensor network is used to acquire non-invasive, non-contact measurements of ASL signing irrespective of lighting conditions. The unique patterns of motion present in the RF data due to the micro-Doppler effect are revealed using time-frequency analysis with the Short-Time Fourier Transform. Linguistic properties of RF ASL data are investigated using machine learning (ML). Results: The information content, measured by fractal complexity, of ASL signing is shown to be greater than that of other upper body activities encountered in daily living. This can be used to differentiate daily activities from signing, while features from RF data show that imitation signing by non-signers is 99\% differentiable from native ASL signing. Feature-level fusion of RF sensor network data is used to achieve 72.5\% accuracy in classification of 20 native ASL signs. Implications: RF sensing can be used to study dynamic linguistic properties of ASL and design Deaf-centric smart environments for non-invasive, remote recognition of ASL. ML algorithms should be benchmarked on native, not imitation, ASL data.

The focus of this paper is the estimation of a delay between two signals. Such a problem is common in signal processing and particularly challenging when the delay is non-stationary in nature. Our proposed solution is based on an all-pass filter framework comprising of two elements: a time delay is equivalent to all-pass filtering and an all-pass filter can be represented in terms of a ratio of a finite impulse response (FIR) filter and its time reversal. Using these elements, we propose an adaptive filtering algorithm with an LMS style update that estimates the FIR filter coefficients and the time delay. Specifically, at each time step, the algorithm updates the filter coefficients based on a gradient descent update and then extracts an estimate of the time delay from the filter. We validate our algorithm on synthetic data demonstrating that it is both accurate and capable of tracking time-varying delays.

This paper proposes a computationally efficient algorithm to solve the joint data and activity detection problem for massive random access with massive multiple-input multiple-output (MIMO). The BS acquires the active devices and their data by detecting the transmitted preassigned nonorthogonal signature sequences. This paper employs a covariance based approach that formulates the detection problem as a maximum likelihood estimation (MLE) problem. To efficiently solve the problem, this paper designs a novel iterative algorithm with low complexity in the regime where the device activity pattern is sparse ??a key feature that existing algorithmic designs have not previously exploited for reducing complexity. Specifically, at each iteration, the proposed algorithm focuses on only a small subset of all potential sequences, namely the active set, which contains a few most likely active sequences (i.e., transmitted sequences by all active devices), and performs the detection for the sequences in the active set. The active set is carefully selected at each iteration based on the current detection result and the first-order optimality condition of the MLE problem. Simulation results show that the proposed active set algorithm enjoys significantly better computational efficiency (in terms of the CPU time) than the state-of-the-art algorithms.

Time-frequency (TF) representations of time series are intrinsically subject to the boundary effects. As a result, the structures of signals that are highlighted by the representations are garbled when approaching the boundaries of the TF domain. In this paper, for the purpose of real-time TF information acquisition of nonstationary oscillatory time series, we propose a numerically efficient approach for the reduction of such boundary effects. The solution relies on an extension of the analyzed signal obtained by a forecasting technique. In the case of the study of a class of locally oscillating signals, we provide a theoretical guarantee of the performance of our approach. Following a numerical verification of the algorithmic performance of our approach, we validate it by implementing it on biomedical signals.

This paper details the FPGA implementation methodology for Convolutional Spiking Neural Networks (CSNN) and applies this methodology to low-power radioisotope identification using high-resolution data. Power consumption of 75 mW has been achieved on an FPGA implementation of a CSNN, with an inference accuracy of 90.62% on a synthetic dataset. The chip validation method is presented. Prototyping was accelerated by evaluating SNN parameters using SpiNNaker neuromorphic platform.

This paper investigates an infra-structure free global localization of a group of communicating mobile agents (e.g., first responders or exploring robots) via an ultra-wideband (UWB) inter-agent ranging aided dead-reckoning. We propose a loosely coupled cooperative localization algorithm that acts as an augmentation atop the local dead-reckoning system of each mobile agent. This augmentation becomes active only when an agent wants to process a relative measurement it has taken. The main contribution of this paper is addressing the challenges in the proper processing of the UWB range measurements in the framework of a loosely coupled cooperative localization. Even though UWB offers a decimeter level accuracy in line-of-sight (LoS) ranging, its accuracy degrades significantly in non-line-of-sight (NLoS) due to the significant unknown positive bias in the measurements. Thus, the measurement models for the UWB LoS and NLoS ranging conditions are different, and proper processing of NLoS measurements requires a bias compensation measure. We also show that, in practice, the measurement modal discriminators determine the type of UWB range measurements should be probabilistic. To take into account the probabilistic nature of the NLoS identifiers when processing UWB inter-agent ranging feedback, we employ an interacting multiple model (IMM) estimator in our localization filter. We also propose a bias compensation method for NLoS UWB measurements. The effectiveness of our cooperative localization is demonstrated via an experiment for a group of pedestrians who use UWB relative range measurements among themselves to improve their shoe-mounted INS geolocation.

The design of isophoric phased arrays composed of two-sized square-shaped tiles that fully cover rectangular apertures is dealt with. The number and the positions of the tiles within the array aperture are optimized to fit desired specifications on the power pattern features. Toward this end, starting from the derivation of theoretical conditions for the complete tileability of the aperture, an ad hoc coding of the admissible arrangements, which implies a drastic reduction of the cardinality of the solution space, and their compact representation with a graph are exploited to profitably apply an effective optimizer based on an integer-coded genetic algorithm. A set of representative numerical examples, concerned with state-of-the-art benchmark problems, is reported and discussed to give some insights on the effectiveness of both the proposed tiled architectures and the synthesis strategy.

We give an overview of recent developments in the modeling of radiowave propagation, based on machine learning algorithms. We identify the input and output specification and the architecture of the model as the main challenges associated with machine learning-driven propagation models. Relevant papers are discussed and categorized based on their approach to each of these challenges. Emphasis is given on presenting the prospects and open problems in this promising and rapidly evolving area.