A. A. Baker

Spin pumping in Ferromagnet-Topological Insulator-Ferromagnet Heterostructures

Topological insulators (TIs) are enticing prospects for the future of spintronics due to their large spin-orbit coupling and dissipationless, counter-propagating conduction channels in the surface state. However, a means to interact with and exploit the topological surface state remains elusive. Here, we report a study of spin pumping at the TI-ferromagnet interface, investigating spin transfer dynamics in a spin-valve like structure using element specific time-resolved x-ray magnetic circular dichroism, and ferromagnetic resonance. Gilbert damping increases approximately linearly with increasing TI thickness, indicating efficient behaviour as a spin sink. However, layer-resolved measurements suggest that a dynamic coupling is limited. These results shed new light on the spin dynamics of this novel material class, and suggest great potential for TIs in spintronic devices, through their novel magnetodynamics that persist even up to room temperature.

Study of Gd-doped Bi2Te3 thin films: Molecular beam epitaxy growth and magnetic properties

Incorporation of magnetic dopants into topological insulators to break time-reversal symmetry is a prerequisite for observing the quantum anomalous Hall (QAHE) effect and other novel magnetoelectric phenomena. GdBiTe3 with a Gd:Bi ratio of 1:1 is a proposed QAHE system, however, the reported solubility limit for Gd doping into Bi2Te3 bulk crystals is between ∼0.01 and 0.05. We present a magnetic study of molecular beam epitaxy grown (GdxBi1–x)2Te3 thin films with a high Gd concentration, up to x ≈ 0.3. Magnetometry reveals that the films are paramagnetic down to 1.5 K. X-ray magnetic circular dichroism at the Gd M4,5 edge at 1.5 K reveals a saturation field of ∼6 T, and a slow decay of the magnetic moment with temperature up to 200 K. The Gd3+ ions, which are substitutional on Bi sites in the Bi2Te3 lattice, exhibit a large atomic moment of ∼7 μB, as determined by bulk-sensitive superconducting quantum interference device magnetometry. Surface oxidation and the formation of Gd2O3 lead to a reduced moment ...

X-ray magnetic spectroscopy of MBE-grown Mn-doped Bi2Se3 thin films

We report the growth of Mn-doped Bi2Se3 thin films by molecular beam epitaxy (MBE), investigated by x-ray diffraction (XRD), atomic force microscopy (AFM), SQUID magnetometry and x-ray magnetic circular dichroism (XMCD). Epitaxial films were deposited on c-plane sapphire substrates by co-evaporation. The films exhibit a spiral growth mechanism typical of this material class, as revealed by AFM. The XRD measurements demonstrate a good crystalline structure which is retained upon doping up to ∼7.5 atomic-% Mn, determined by Rutherford backscattering spectrometry (RBS), and show no evidence of the formation of parasitic phases. However an increasing interstitial incorporation of Mn is observed with increasing doping concentration. A magnetic moment of 5.1 μB/Mn is obtained from bulk-sensitive SQUID measurements, and a much lower moment of 1.6 μB/Mn from surface-sensitive XMCD. At ∼2.5 K, XMCD at the Mn L2,3 edge, reveals short-range magnetic order in the films and indicates ferromagnetic order below 1.5 K.

Topological computation based on direct magnetic logic communication.

Non-uniform magnetic domains with non-trivial topology, such as vortices and skyrmions, are proposed as superior state variables for nonvolatile information storage. So far, the possibility of logic operations using topological objects has not been considered. Here, we demonstrate numerically that the topology of the system plays a significant role for its dynamics, using the example of vortex-antivortex pairs in a planar ferromagnetic film. Utilising the dynamical properties and geometrical confinement, direct logic communication between the topological memory carriers is realised. This way, no additional magnetic-to-electrical conversion is required. More importantly, the information carriers can spontaneously travel up to ~300 nm, for which no spin-polarised current is required. The derived logic scheme enables topological spintronics, which can be integrated into large-scale memory and logic networks capable of complex computations.

Study of Dy-doped Bi2Te3: thin film growth and magnetic properties

Breaking the time-reversal symmetry (TRS) in topological insulators (TIs) through ferromagnetic doping is an essential prerequisite for unlocking novel physical phenomena and exploring potential device applications. Here, we report the successful growth of high-quality (Dy(x)Bi(1-x))2Te3 thin films with Dy concentrations up to x = 0.355 by molecular beam epitaxy. Bulk-sensitive magnetisation studies using superconducting quantum interference device magnetometry find paramagnetic behaviour down to 2 K for the entire doping series. The effective magnetic moment, μeff, is strongly doping concentration-dependent and reduces from ∼12.6 μ(B) Dy(-1) for x = 0.023 to ∼4.3 μ(B) Dy(-1) for x = 0.355. X-ray absorption spectra and x-ray magnetic circular dichroism (XMCD) at the Dy M4,5 edge are employed to provide a deeper insight into the magnetic nature of the Dy(3+)-doped films. XMCD, measured in surface-sensitive total-electron-yield detection, gives μ(eff )= 4.2 μ(B) Dy(-1). The large measured moments make Dy-doped films interesting TI systems in which the TRS may be broken via the proximity effect due to an adjacent ferromagnetic insulator.

Room-temperature helimagnetism in FeGe thin films

Chiral magnets are promising materials for the realisation of high-density and low-power spintronic memory devices. For these future applications, a key requirement is the synthesis of appropriate materials in the form of thin films ordering well above room temperature. Driven by the Dzyaloshinskii-Moriya interaction, the cubic compound FeGe exhibits helimagnetism with a relatively high transition temperature of 278 K in bulk crystals. We demonstrate that this temperature can be enhanced significantly in thin films. Using x-ray scattering and ferromagnetic resonance techniques, we provide unambiguous experimental evidence for long-wavelength helimagnetic order at room temperature and magnetic properties similar to the bulk material. We obtain αintr = 0.0036 ± 0.0003 at 310 K for the intrinsic damping parameter. We probe the dynamics of the system by means of muon-spin rotation, indicating that the ground state is reached via a freezing out of slow dynamics. Our work paves the way towards the fabrication of thin films of chiral magnets that host certain spin whirls, so-called skyrmions, at room temperature and potentially offer integrability into modern electronics.

Study of Ho-doped Bi2Te3 topological insulator thin films

Breaking time-reversal symmetry through magnetic doping of topological insulators has been identified as a key strategy for unlocking exotic physical states. Here, we report the growth of Bi2Te3 thin films doped with the highest magnetic moment element Ho. Diffraction studies demonstrate high quality films for up to 21% Ho incorporation. Superconducting quantum interference device magnetometry reveals paramagnetism down to 2 K with an effective magnetic moment of ∼5 μB/Ho. Angle-resolved photoemission spectroscopy shows that the topological surface state remains intact with Ho doping, consistent with the materials paramagnetic state. The large saturation moment achieved makes these films useful for incorporation into heterostructures, whereby magnetic order can be introduced via interfacial coupling.

Transverse field muon-spin rotation measurement of the topological anomaly in a thin film of MnSi.

We present the results of transverse-field muon-spin rotation measurements on an epitaxially grown 40-nm-thick film of MnSi on Si(111) in the region of the field-temperature phase diagram where a skyrmion phase has been observed in the bulk. We identify changes in the quasistatic magnetic field distribution sampled by the muon, along with evidence for magnetic transitions around T≈40 and 30 K. Our results suggest that the cone phase is not the only magnetic texture realized in film samples for out-of-plane fields.

An ultra-compact, high-throughput molecular beam epitaxy growth system

We present a miniaturized molecular beam epitaxy (miniMBE) system with an outer diameter of 206 mm, optimized for flexible and high-throughput operation. The three-chamber system, used here for oxide growth, consists of a sample loading chamber, a storage chamber, and a growth chamber. The growth chamber is equipped with eight identical effusion cell ports with linear shutters, one larger port for either a multi-pocket electron beam evaporator or an oxygen plasma source, an integrated cryoshroud, retractable beam-flux monitor or quartz-crystal microbalance, reflection high energy electron diffraction, substrate manipulator, main shutter, and quadrupole mass spectrometer. The system can be combined with ultrahigh vacuum (UHV) end stations on synchrotron and neutron beamlines, or equivalently with other complex surface analysis systems, including low-temperature scanning probe microscopy systems. Substrate handling is compatible with most UHV surface characterization systems, as the miniMBE can accommodate standard surface science sample holders. We introduce the design of the system, and its specific capabilities and operational parameters, and we demonstrate the epitaxial thin film growth of magnetoelectric Cr2O3 on c-plane sapphire and ferrimagnetic Fe3O4 on MgO (001).

Proposal of a micromagnetic standard problem for ferromagnetic resonance simulations

Nowadays, micromagnetic simulations are a common tool for studying a wide range of different magnetic phenomena, including the ferromagnetic resonance. A technique for evaluating reliability and validity of different micromagnetic simulation tools is the simulation of proposed standard problems. We propose a new standard problem by providing a detailed specification and analysis of a sufficiently simple problem. By analyzing the magnetization dynamics in a thin permalloy square sample, triggered by a well defined excitation, we obtain the ferromagnetic resonance spectrum and identify the resonance modes via Fourier transform. Simulations are performed using both finite difference and finite element numerical methods, with OOMMF and Nmag simulators, respectively. We report the effects of initial conditions and simulation parameters on the character of the observed resonance modes for this standard problem. We provide detailed instructions and code to assist in using the results for evaluation of new simulator tools, and to help with numerical calculation of ferromagnetic resonance spectra and modes in general.