A. Cores

Iron ores, fluxes and tuyere injected coals used in the blast furnace

Abstract Iron ores, fluxes and tuyere injected coals used as burden materials in the blast furnace have been characterised by chemical and granulometric analysis, moisture, density and porosity, softening and melting temperatures, reductibility, X-ray diffraction, electronic microscopy and thermoanalysis. Theoretical calculations on the influence of both the chemical composition and ash content of coals on some aspects of the blast furnace operation have been carried out. The combustion behaviour of pulverised coals in a pilot plant equipped with a combustion chamber has been studied to indicate what the behaviour of each type of coal will be, when injected in blast furnace tuyeres.

Monitoring and control of hearth refractory wear to improve blast furnace operation

Abstract Refractory wear and skull growth on the hearth walls and the bottom of the blast furnace have been researched. A series of thermocouples were installed in the hearth, and the temperature measurements were recorded in a structured query language every minute. A heat transfer model was used to study the temperature evolution and hearth wear profile using a commercial software package (MATLAB version 5.0) based on computational fluid dynamics. The location of the 1150°C isotherm in the hearth lining has been calculated. An online monitoring tool was used to analyse the temperature distribution in the hearth and offers, to the plant operators, periodic information on the refractory state. Electromotive force (EMF) probes were installed in the hearth to estimate the variations in the liquid level in the hearth and to determine the thermal state (TS) evolution. Good correlation is seen between EMF and TS, and the EMF amplitudes in the different tapholes follow and even precede the local TS.

Relationship between sinter properties and iron ore granulation index

Abstract A range of iron ores were used in varying proportions to prepare 28 different ore mixtures. Each mixture was classified according to its granulation index and sintered in a pilot plant. The resulting sinters were characterised by chemical analysis, degradation during reduction in the blast furnace (reduction degradation index test), cold strength (tumbler test), coke consumption and process productivity. Sinter quality was assessed in relation to the granulation index of the ore mixture.

Racionalización de mezclas de minerales de hierro para la obtención de sinterizados de calidad optima

Various iron ores, fluxes and coke, were used to prepare four ore mixtures with different proportions of these minerals. With each mixtures a series of sinters were produced in the pilot plant. Each one of the sinters was characterised by: chemical and granulometric analysis; degradation test on the sinter during reduction in the blast furnace, (RDI test); cold resistance test, (Tumbler Test); reducibility test; determining of softening and melting temperatures; and the determination of the structure of the sinter by electron microscopy. T he conditions of the mixtures and the operational parameters for obtaining the optimum quality of the sinters were established.

Caracterización de carbones para la inyección por toberas en el horno alto

The efficiency of blast furnace operation with pulverized coal injection (PCI) by tuyeres is determined by the composition and properties of the used coals and by the quality of the ferrous burden and coke. A study in thermobalance of coals to be injected by tuyeres is carried out, and the softening and melting temperatures of coals ash are determined. The coal performance and its influence in the blast furnace operation is estimated.