A El-Turki

Electrospun biomimetic nanocomposite nanofibers of hydroxyapatite/chitosan for bone tissue engineering

The development of bioinspired or biomimetic materials is essential and has formed one of the most important paradigms in todays tissue engineering research. This paper reports a novel biomimetic nanocomposite nanofibers of hydroxyapatite/chitosan (HAp/CTS) prepared by combining an in situ co-precipitation synthesis approach with an electrospinning process. A model HAp/CTS nanocomposite with the HAp mass ratio of 30 wt% was synthesized through the co-precipitation method so as to attain homogenous dispersion of the spindle-shaped HAp nanoparticles (ca. 100 x 30 nm) within the chitosan matrix. By using a small amount (10 wt%) of ultrahigh molecular weight poly(ethylene oxide) (UHMWPEO) as a fiber-forming facilitating additive, continuous HAp/CTS nanofibers with a diameters of 214+/-25 nm had been produced successfully and the HAp nanoparticles with some aggregations were incorporated into the electrospun nanofibers. Further SAED and XRD analysis confirmed that the crystalline nature of HAp remains and had survived the acetic acid-dominant solvent system. Biological in vitro cell culture with human fetal osteoblast (hFOB) cells for up to 15 days demonstrated that the incorporation of HAp nanoparticles into chitosan nanofibrous scaffolds led to significant bone formation oriented outcomes compared to that of the pure electrospun CTS scaffolds. The electrospun nanocomposite nanofibers of HAp/CTS, with compositional and structural features close to the natural mineralized nanofibril counterparts, are of potential interest for bone tissue engineering applications.

Banana peel: A green and economical sorbent for the selective removal of Cr(VI) from industrial wastewater

This study describes the use of banana peel, a commonly produced fruit waste, for the removal of Cr(VI) from industrial wastewater. The parameters pH, contact time, initial metal ion concentration, and temperature were investigated and the conditions resulting in rapid and efficient adsorption (95% within 10 min) were determined. The binding of metal ions was found to be pH dependent with the optimal sorption occurring at pH 2. The retained species were eluted with 5 mL of 2M H(2)SO(4). To elucidate the mechanism of the process, total amounts of chromium and Cr(VI) were analyzed using flame atomic absorption and ultraviolet-visible (UV-vis) spectroscopic techniques, respectively. The Langmuir and Dubinin-Radushkevich (D-R) isotherms were used to describe the partitioning behavior for the system at different temperatures. Kinetics and thermodynamics of Cr(VI) removal by banana peel were also studied. The influence of diverse ions on the sorption behavior revealed that only Fe(II) ions (of those tested) suppressed the sorption of Cr(VI) ions to some extent. The method was applied for the removal of Cr(VI) from industrial wastewater.

Characterization of banana peel by scanning electron microscopy and FT-IR spectroscopy and its use for cadmium removal

This study describes the use of banana peel, a commonly produced fruit waste, for the removal of Cd(II) from environmental and industrial wastewater. The banana peel was characterized by FT-IR and scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX) analysis. The parameters pH, contact time, initial metal ion concentration and temperature were investigated and found to be rapid ( approximately 97% within 10 min). The Langmuir adsorption isotherm was used to describe partitioning behavior for the system at room temperature. The value of Q(L) was found to be (35.52 mg g(-1)) higher than the previously reported materials. The binding of metal ions was found to be pH-dependent with the optimal sorption occurring at pH 8. The retained species were eluted with 5 mL of 5 x 10(-3)M HNO(3) with the detection limit of 1.7 x 10(-3)mg L(-1). Kinetics of sorption followed the pseudo-first-order rate equation with the rate constant k, equal to 0.13+/-0.01 min(-1). Thermodynamic parameters such as Gibbs free energy at 303K (-7.41+/-0.13 kJ mol(-1)) and enthalpy (40.56+/-2.34 kJ mol(-1)) indicated the spontaneous and endothermic nature of the sorption process. The developed method was utilized for the removal of Cd(II) ions from environmental and industrial wastewater samples using flame atomic absorption spectrophotometer (FAAS).

Differential adhesion of Streptococcus gordonii to anatase and rutile titanium dioxide surfaces with and without functionalization with chlorhexidine

The majority of dental implants are composed primarily of titanium and have an outer layer of titanium dioxide. Crystalline titanium dioxide most commonly exists in one of the two structures, anatase and rutile, and both of these have been observed on commercially available dental implants. Early implant failure can be associated with postoperative infection due to implant contamination during or immediately after surgery. The impetus of this study was to investigate whether functionalization of anatase and rutile titanium dioxide surfaces with chlorhexidine-reduced subsequent colonization of the surface by Streptococcus gordonii. Exposure to 100 mg x L(-1) chlorhexidine for 60 s resulted in a fivefold reduction in S. gordonii coverage on anatase and a twofold reduction on rutile. This may be related to a preferential adsorption of chlorhexidine to anatase compared with rutile. The reduction in bacterial coverage was not due to desorption of chlorhexidine into solution. More bacteria were observed on anatase than rutile surfaces without chlorhexidine functionalization, indicating that crystal structure may have a significant effect on bacterial colonization. In conclusion, functionalization with chlorhexidine reduced bacterial coverage on titanium dioxide surfaces, and anatase surfaces may be more amenable to such treatment than rutile.

Evaluation of sorption of uranium onto metakaolin using X-ray photoelectron and Raman spectroscopies

Metakaolin prepared from a natural clay mineral ore of aluminium kaolinite is a promising low cost and high activity aluminosilicate material that has been investigated for studying the sorption behavior of uranium. Here, metakaolin was characterized using X-ray photoelectron spectroscopy (XPS) and the effects of pH, contact time and initial metal ion concentration on its sorption behavior were studied. The sorption process was found to initially be rapid (approximately 60% at time 0 min) but became slower with time; equilibrium was established within 24 h (approximately 80% sorption). The data were applied to study the kinetics of the sorption process. The Langmuir and Dubinin-Radushkevich (D-R) sorption isotherms were used to describe partitioning behavior for the system at room temperature. The binding of metal ions was found to be pH dependent, with optimal sorption occurring at pH 5. The retained metal ions were eluted with 5 mL of 0.1 M HNO(3). Raman spectroscopy and XPS were used to evaluate the sorption mechanism of U(VI).

Theoretical development and validation of a Sharp Front model of the dewatering of a slurry by an absorbent substrate

The absorption of water from a slurry into an absorbent substrate is analysed using Sharp Front theory. The analysis describes the relationship between the sorptivity S of the substrate, the desorptivity R of the slurry and the transfer sorptivity A between slurry and substrate, and leads to the relationship 1/A2 = 1/R2 + 1/S2. Experimental data are presented which validate this equation for the practically important case of the absorption of water from soft mortar mixes by fired clay bricks. A unique feature of the experimental work is the measurement of the desorptivity of the mortars at a pressure equal to the wetting front capillary pressure of the clay brick substrate. Analysis of the experimental data also enables, for the first time, the calculation of the capillary potential at the slurry/substrate interface. The analysis has relevance to many aspects of ceramic and mineral processing, industrial filtration and construction engineering.

Role of NO2 and SO2 in degradation of limestone

Abstract A UNESCO designated World Heritage Site, the city of Bath has many important listed buildings largely constructed of limestone from local quarries. Among present day atmospheric pollutants, SO2 is particularly damaging to calcareous stone, although its levels are decreasing with the use of low sulphur oil and coal, flue gas cleaning systems, and the switch to natural gas burning for many purposes. Typical urban SO2 concentrations have fallen from 39 to <5 ppb over the past 12 years. In contrast, present day levels of NO2 are enhanced by the increased emissions from automotive exhausts, having risen to 30 ppb from 15 ppb in 1987. In recent years, the effect of NOx species on the deterioration of calcereous stones has also become evident, both exclusively and in the presence of SO2 . Bath stone is especially susceptible to attack. To shed new light on the process of gas–stone interaction, specimens of the oolitic limestone have been exposed to gaseous SO2 and NOx under controlled conditions. X-ray photoelectron spectroscopy and weight gain analysis have been used conjointly to determine the chemical state of the reaction products, and to elucidate the mechanism of the process of degradation from its earliest stages.

Composition and morphology of corrosion products formed on galvanised steel exposed to a swimming pool atmosphere

Abstract This paper reports a study of the composition and morphology of the corrosion products formed on galvanised steel specimens exposed to a swimming pool atmosphere. Two thicknesses of hot dip zinc coatings were investigated measuring 1·8 and 180 µm, respectively. Specimens were analysed throughout a 12 month exposure period and a reaction sequence identified using the techniques of X-ray diffraction, X-ray photoelectron spectroscopy, and SEM/EDX. The main phases determined were: zincite (ZnO), simonkolleite (Zn5(OH)8Cl2. H2O), hydrated zinc hydroxychlorosulphate (Zn4Cl2(OH)4SO4. 5H2O), and hydrated sodium zinc hydroxychlorosulphate (NaZn4Cl(OH)6SO4. 6H2O). Amarantite (FeSO4(OH). 3H2O) was found only on the specimens with the thinner zinc coating through which iron diffusion from the bulk steel could occur.