A. Frankowski

Prototype of the SST-1M Telescope Structure for the Cherenkov Telescope Array

A single-mirror small-size (SST-1M) Davies-Cotton telescope with a dish diameter of 4 m has been built by a consortium of Polish and Swiss institutions as a prototype for one of the proposed small-size telescopes for the southern observatory of the Cherenkov Telescope Array (CTA). The design represents a very simple, reliable, and cheap solution. The mechanical structure prototype with its drive system is now being tested at the Institute of Nuclear Physics PAS in Krakow. Here we present the design of the prototype and results of the performance tests of the structure and the drive and control system.

Using muon rings for the optical throughput calibration of the SST-1M prototype for the Cherenkov Telescope Array

S. Toscano∗ a,n, E. Prandinia E-mail: simona.toscano@vub.ac.be W. Bilnikk, J. Blockic, L. .Bogaczm, T .Bulikd , F. Cadouxb, A. Christovb, M. Curyloc, D. della Volpeb, M. Dyrdac, Y. Favreb, A. Frankowskig, Ł. Grudnikic, M. Grudzinskad , M. Hellerb, B. Idźkowskie, M. Jamrozye, M. Janiakg, J. Kasperekk, K. Lalikk, E. Lyarda, E. Machc, D. Mandatl , A. Marszalekc,e, J. Michalowskic, R. Moderskig, T. Montarulib, A. Neronova, J. Niemiecc, M. Ostrowskie, P. Paśko f , M. Pechl , A. Porcellib, P. Rajdak, M. Rameezb, E. Jr. Schioppab, P. Schovanekl , K. Seweryn f , K. Skowronc, V. Sliusar j, M. Sowinskic, Ł. Stawarze, M. Stodulskae, M. Stodulskic, I. Troyano Pujadasb, R. Waltera, M. Wiȩcekk, A. Zagdanskie, K. Ziȩtarae, P. Żychowskic for the CTA Consortium† a. ISDC, Observatoire de Geneve, Universite de Geneve, 1290 Versoix, Switzerland. b. Department de physique nucleaire et corpusculaire, Universite de Geneve, CH-1205 Switzerland. c. Instytut Fizyki Jadrowej im. H. Niewodniczanskiego Polskiej Akademii Nauk, 31-342 Krakow, Poland. d. Astronomical Observatory, University of Warsaw, Al. Ujazdowskie 4, 00-478 Warsaw, Poland e. Astronomical Observatory, Jagiellonian University, ul. Orla 171, 30-244, Krakow, Poland. f. Centrum Badan Kosmicznych Polskiej Akademii Nauk, 18a Bartycka str., 00-716 Warsaw, Poland. g. Nicolaus Copernicus Astronomical Center, Polish Academy of Sciences, Warsaw, Poland. j. Astronomical Observatory, Taras Shevchenko Nat. University of Kyiv, Observatorna str., 3, Kyiv, Ukraine. k. AGH University of Science and Technology, al.Mickiewicza 30, Krakow, Poland, l. Institute of Physics of the Czech Academy of Sciences, Prague, Czech Republic. m. Department of Information Technologies, Jagiellonian University, 30-348 Krakow, Poland. n. Vrije Universiteit Brussels, Pleinlaan 2 1050 Brussels, Belgium.

Development of an optical system for the SST-1M telescope of the Cherenkov Telescope Array observatory

The prototype of a Davies-Cotton small size telescope (SST-1M) has been designed and developed by a consortium of Polish and Swiss institutions and proposed for the Cherenkov Telescope Array (CTA) observatory. The main purpose of the optical system is to focus the Cherenkov light emitted by extensive air showers in the atmosphere onto the focal plane detectors. The main component of the system is a dish consisting of 18 hexagonal mirrors with a total effective collection area of 6.47 m 2 (including the shadowing and estimated mirror reflectivity). Such a solution was chosen taking into account the analysis of the Cherenkov light propagation and based on optical simulations. The proper curvature and stability of the dish is ensured by the mirror alignment system and the isostatic interface to the telescope structure. Here we present the design of the optical subsystem together with the performance measurements of its components.

The single mirror small size telescope (SST-1M) of the Cherenkov Telescope Array

The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA). The CTA south array will be composed of about 100 telescopes, out of which about 70 are of SST class, which are optimized for the detection of gamma rays in the energy range from 5 TeV to 300 TeV. The SST-1M implements a Davies-Cotton optics with a 4 m dish diameter with a field of view of 9°. The Cherenkov light produced in atmospheric showers is focused onto a 88 cm wide hexagonal photo-detection plane, composed of 1296 custom designed large area hexagonal silicon photomultipliers (SiPM) and a fully digital readout and trigger system. The SST-1M camera has been designed to provide high performance in a robust as well as compact and lightweight design. In this contribution, we review the different steps that led to the realization of the telescope prototype and its innovative camera.

Performance of the small size telescope sub-array of the Cherenkov Telescope Array observatory

The southern part of the Cherenkov Telescope Array (CTA) observatory will consist of at least three types of telescopes: large size, medium size and small size telescopes. Massive Monte Carlo simulations have been performed using the European Grid Infrastructure to analyze the performance of this array. We present the results of these simulations for a sub-array of small size telescopes of the Davies-Cotton type. Such a telescope, called SST-1M, is currently being proposed for the CTA observatory by a group of Polish and Swiss institutions. SST-1M will have a mirror of 4m diameter and it will be equipped with a fully digital camera based on silicon photodetectors. We present the analysis of the sub-array sensitivity, angular resolution, and energy resolution to demonstrate the fulfillment of the requirements of the CTA Consortium. To verify the results obtained in numerical simulations a construction of a mini array of five SST-1M telescopes is planned. We also present the performance of such a mini array and discuss the prospects of its scientific program.

DigiCam: fully digital compact camera for SST-1M telescope

The single mirror Small Size Telescopes (SST-1M), being built by a sub-consortium of Polish and Swiss Institutions of the CTA Consortium, will be equipped with a fully digital camera with a compact photodetector plane based on silicon photomultipliers. The internal trigger signal transmission overhead will be kept at low level by introducing a high level of integration. It will be achieved by massively deploying state-of-the-art multi-gigabit transceivers, beginning from the ADC flash converters, through the internal data and trigger signals transmission over backplanes and cables, to the camera’s server 10Gb/s Ethernet links. Such approach will allow fitting the size and weight of the camera exactly to the SST-1M needs, still retaining the flexibility of a fully digital design. Such solution has low power consumption, high reliability and long lifetime. The concept of the camera will be described, along with some construction details and performance results.

The single mirror small sized telescope for the Cherenkov telescope array

The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA). About 70 SST telescopes will be part the CTA southern array which will also include Medium Sized Telescopes (MST) in its threshold configuration. Optimized for the detection of gamma rays in the energy range from 5 TeV to 300 TeV, the SST-1M uses a Davies-Cotton optics with a 4 m dish diameter with a field of view of 9 degrees. The Cherenkov light resulting from the interaction of the gamma-rays in the atmosphere is focused onto a 88 cm side-to-side hexagonal photo-detection plane. The latter is composed of 1296 hollow light guides coupled to large area hexagonal silicon photomultipliers (SiPM). The SiPM readout is fully digital readout as for the trigger system. The compact and lightweight design of the SST-1M camera offers very high performance ideal for gamma-ray observation requirement. In this contribution, the concept, design, performance and status of the first telescope prototype are presented.

Control Software for the SST-1M Small-Size Telescope prototype for the Cherenkov Telescope Array

The SST-1M is a 4-m Davies-Cotton atmospheric Cherenkov telescope optimized to provide gamma-ray sensitivity above a few TeV. The SST-1M is proposed as part of the Small-Size Telescope array for the Cherenkov Telescope Array (CTA), the first prototype has already been deployed. The SST-1M control software of all subsystems (active mirror control, drive system, safety system, photo-detection plane, DigiCam, CCD cameras) and the whole telescope itself (master controller) uses the standard software design proposed for all CTA telescopes based on the ALMA Common Software (ACS) developed to control the Atacama Large Millimeter Array (ALMA). Each subsystem is represented by a separate ACS component, which handles the communication to and the operation of the subsystem. Interfacing with the actual hardware is performed via the OPC UA communication protocol, supported either natively by dedicated industrial standard servers (PLCs) or separate service applications developed to wrap lower level protocols (e.g. CAN bus, camera slow control) into OPC UA. Early operations of the telescope without the camera were already carried out. The camera is fully assembled and is capable to perform data acquisition using artificial light source.

Performance of the SST-1M telescope of the Cherenkov Telescope Array observatory

R. Moderskic,W. Bilnikk, J. Blockig, L. Bogacze, T. Bulikd , F. Cadouxa, A. Christova, M. Chruślinskad , M. Curylog, D. della Volpea, M. Dyrdag, Y. Favrea, A. Frankowskic, Ł. Grudnikg, M. Grudzinskad , M. Hellera, B. Idźkowskib, M. Jamrozyb, M. Janiakc, J. Kasperekk, K. Lalikk, E. Lyard f , E. Machg, D. Mandatm, A. Marszalekh,b, J. Michalowskig, T. Montarulia, A. Neronov f , J. Niemiecg, M. Ostrowskib, P. Paśkoh, M. Pechm, A. Porcelli∗a, E. Prandini f , E. Puescheln, P. Rajdak, M. Rameeza, P. Rozwadowskid , E. jr Schioppaa, P. Schovanekm, K. Sewerynh, K. Skowrong, V. Sliusari, M. Sowinskig, Ł. Stawarzb, M. Stodulskab, M. Stodulskig, S. Toscano f ,l, I. Troyano Pujadasa, R. Walter f , M. Wiȩcekk, A. Zagdanskib, K. Ziȩtarab, P. Żychowskig for the CTA Consortium† aDPNC – Universite de Geneve, Geneve, Switzerland bAstronomical Observatory, Jagiellonian University, Krakow, Poland cNicolaus Copernicus Astronomical Centre, Polish Academy of Sciences, Warsaw, Poland dAstronomical Observatory, University of Warsaw, Warsaw,Poland eDepartment of Information Technologies, Jagiellonian University, Krakow, Poland f ISDC, Observatoire de Geneve, Universite de Geneve, Versoix, Switzerland gInstytut Fizyki Jadrowej im. H. Niewodniczanskiego Polskiej Akademii Nauk, Krakow, Poland hCentrum Badan Kosmicznych Polskiej Akademii Nauk, Warsaw, Poland iAstronomical Observatory, Taras Shevchenko National University of Kyiv, Kyiv, Ukraine kAGH University of Science and Technology, Krakow, Poland lVrije Universiteit Brussels, Brussels, Belgium mInstitute of Physics of the Czech Academy of Sciences, Prague, Czech Republic nUniversity College Dublin, Ireland

Front-end and slow control electronics for large area SiPMs used for the single mirror Small Size Telescope (SST-1M) of the Cherenkov Telescope Array (CTA)

The single mirror Small Size Telescope (SST-1M) project proposes a design among others for the smallest type of telescopes (SST), that will compose the south observatory of the Cherenkov Telescope Array (CTA). The SST camera collecting the Cherenkov light resulting from very high energy gamma-ray interactions in the atmosphere proposes to use Silicon PhotoMultipliers (SiPM). The SST-1M design has led to the use of unique pixel shape and size that required a dedicated development by the University of Geneva and Hamamatsu. An active surface of ~94 mm2 and a resulting total capacitance of ~3.4 nF combined with the stringent requirements of the CTA project on timing and charge resolution have led the University of Geneva to develop a custom preamplifier stage and slow-control system. The design and performance of the tailor made preamplifier stage and of the slow control electronics will be briefly described. The bias circuit of the sensor contains a resistor meant to prevent the sensor from drawing high current. However this resistor also introduces a voltage drop at the sensor input impacting the stability of its operation. A model has been developed in order to derive the parameters needed to account for it at the data analysis level. A solution based on the SST-1M front-end and digital readout is proposed to compensate for the voltage drop at the sensor cathode.