A. Krenevičius

THE INVESTIGATION AND PECULIARITIES OF CALCULATION OF TRANSPORT MACHINE ELEMENTS MADE OF AUSTEMPERED DUCTILE IRON

Abstract In this article the statical and cyclical strength investigations of austempered ductile cast iron (ADI) are presented. ADI material becomes more and more popular. Ductile iron is lighter than steel and its mechanical properties are better. ADI has good resistance to fatigue, high tensile strength, toughness and ductility. The fatigue crack initiation generally occurs in the graphite matrix. In the work the kinetic fatigue diagrams, longevity distributions laws and the mathematical model of crack growth ratio are described. The blanks of material were cut from a tooth of gear. Structure of the material consists of bainite and spherical graphite. The mechanical properties of ADI were obtained with assessment of chemical composition. The detennined statical mechanical properties of two different ADI materials are presented. The compact specimen was produced in order to detennine a threshold stress intensity factor. According to the investigations the stress intensity factor (threshold) is ΔK th = 9...

PECULIARITIES OF CALCULATING THE CYCLIC STRENGTH OF IMPORTANT THREADED JOINTS

Abstract The calculation of the strength of important threaded joints is started by defining the minimum size of the cross-section of bolts (studs). Then the static and cyclic strength is tested. The studs of the demountable joints of nuclear power equipment are calculated in accordance with the norms of the Russian Federation and the ASME Code. The calculation methods coincide in essence, they are based on similar limit states; however, there also some differences exist. The authors investigate and compare both methods in their work. There is a brief analysis of calculation methods in the article. For closer definition of standards and their substantiation the authors used experimental and theoretical investigations performed at Laboratory of Strength Mechanics of Vilnius Gediminas Technical University. In order to develop a uniform cyclic strength and shakedown calculation procedure for critical threaded joints, a completely new calculation of a progressive profile change is recommended to be performed ...

ANALYSIS OF EXPERIMENT AND CALCULATION OF THE THREADED JOINTS UNDER TENSION AND CYCLIC BENDING

Summary The effect of individual elements of the system “bolt-nut” under tension and bending on the cyclic strength is a complicated and insufficiently clear subject. The data presented in the works of the laboratories of strength mechanics and those of the present authors have been obtained when the ratio of bending and tension stress caused by eccentrically applied tension force was from 0 to 1.5. If stresses caused by bending account for 0.25 σ y of tension stresses, the strength to low-cycle fatigue somewhat increases. When σ m = 1.5σ n , the decrease in longevity is observed. The results obtained, however, differ insignificantly from the longevity of threaded joints under cyclic tension as long as bending stresses do not exceed 0.5. σ y . A comprehensive experimental study of these problems and the analysis are presented in the works of the present authors. One of the main factors determining the cyclic strength of the system “bolt-nut” is the distribution of internal resultants. The distribution of ...