A. M. Mikhailov

Atomic structure at 2.5 Å resolution of uridine phosphorylase from E. coli as refined in the monoclinic crystal lattice

Uridine phosphorylase from E. coli (Upase) has been crystallized using vapor diffusion technique in a new monoclinic crystal form. The structure was determined by the molecular replacement method at 2.5 Å resolution. The coordinates of the trigonal crystal form were used as a starting model and the refinement by the program XPLOR led to the R‐factor of 18.6%. The amino acid fold of the protein was found to be the same as that in the trigonal crystals. The positions of flexible regions were refined. The conclusion about the involvement in the active site is in good agreement with the results of the biochemical experiments.

The atomic structure of Carnation Mottle Virus capsid protein

The structure of the Carnation Mottle Virus (CMtV) capsid protein has been determinated at 3.2 Å resolution by the method of molecular replacement. Three‐dimensional data were collected from a small number of crystals (sp.g.I23, a = 382.6 Å) using the synchrotron radiation with an image plate as detector. The coordinates of Tomato Bushy Stunt Virus (TBSV) were used as a searching model. Refinement of the coordinates of 7,479 non‐hydrogen atoms performed by the program XPLOR, has led to an R‐factor of 18.3%. It was found that the amino acid chain fold of capsid protein is very similar to that in other icosahedral viruses. However, there are some differences in the contact regions between protein subunits and also the lack of the β‐annulus around the 3‐fold icosahedral axes. The structural and biochemical results lead us to consider an alternative assembly pathway.

Atomic structure of the Serratia marcescens endonuclease at 1.1 A resolution and the enzyme reaction mechanism.

The three-dimensional crystal structure of Serratia marcescens endonuclease has been refined at 1.1 A resolution to an R factor of 12.9% and an R(free) of 15.6% with the use of anisotropic temperature factors. The model contains 3694 non-H atoms, 715 water molecules, four sulfate ions and two Mg(2+)-binding sites at the active sites of the homodimeric protein. It is shown that the magnesium ion linked to the active-site Asn119 of each monomer is surrounded by five water molecules and shows an octahedral coordination geometry. The temperature factors for the bound Mg(2+) ions in the A and B subunits are 7.08 and 4.60 A(2), respectively, and the average temperature factors for the surrounding water molecules are 12.13 and 10.3 A(2), respectively. In comparison with earlier structures, alternative side-chain conformations are defined for 51 residues of the dimer, including the essential active-site residue Arg57. A plausible mechanism of enzyme function is proposed based on the high-resolution S. marcescens nuclease structure, the functional characteristics of the natural and mutational forms of the enzyme and consideration of its structural analogy with homing endo-nuclease I-PpoI.

Mistletoe lectin I in complex with galactose and lactose reveals distinct sugar-binding properties

The structures of mistletoe lectin I (ML-I) from Viscum album complexed with lactose and galactose have been determined at 2.3 A resolution and refined to R factors of 20.9% (Rfree = 23.6%) and 20.9 (Rfree = 24.6%), respectively. ML-I is a heterodimer and belongs to the class of ribosome-inactivating proteins of type II, which consist of two chains. The A-chain has rRNA N-glycosidase activity and irreversibly inhibits eukaryotic ribosomes. The B-chain is a lectin and preferentially binds to galactose-terminated glycolipids and glycoproteins on cell membranes. Saccharide binding is performed by two binding sites in subdomains alpha1 and gamma2 of the ML-I B-chain separated by approximately 62 A from each other. The favoured binding of galactose in subdomain alpha1 is achieved via hydrogen bonds connecting the 4-hydroxyl and 3-hydroxyl groups of the sugar moiety with the side chains of Asp23B, Gln36B and Lys41B and the main chain of 26B. The aromatic ring of Trp38B on top of the preferred binding pocket supports van der Waals packing of the apolar face of galactose and stabilizes the sugar-lectin complex. In the galactose-binding site II of subdomain gamma2, Tyr249B provides the hydrophobic stacking and the side chains of Asp235B, Gln238B and Asn256B are hydrogen-bonding partners for galactose. In the case of the galactose-binding site I, the 2-hydroxyl group also stabilizes the sugar-protein complex, an interaction thus far rarely detected in galactose-specific lectins. Finally, a potential third low-affinity galactose-binding site in subunit beta1 was identified in the present ML-I structures, in which a glycerol molecule from the cryoprotectant buffer has bound, mimicking the sugar compound.

Three-dimensional structure of Serratia marcescens nuclease at 1.7 A resolution and mechanism of its action.

The three‐dimensional crystal structure of Serratia marcescens (Sm) nuclease has been refined at 1.7 Å resolution to the R‐factor of 17.3% and R‐free of 22.2%. The final model consists of 3678 non‐hydrogen atoms and 443 water molecules. The analysis of the secondary and the tertiary structures of the Sm nuclease suggests a topology which reveals essential inner symmetry in all the three layers forming the monomer. We propose the plausible mechanism of its action based on a concerted participation of the catalytically important amino acid residues of the enzyme active site.

Crystallisation under microgravity of mistletoe lectin I from Viscum album with adenine monophosphate and the crystal structure at 1.9 Å resolution

The crystal structure of the ribosome-inactivating protein (RIP) mistletoe lectin I (ML-I) from Viscum album in complex with adenine has been refined to 1.9 A resolution. High quality crystals of the ML-I complex were obtained by the method of vapour diffusion using the high density protein crystal growth system (HDPCG) on the international space station, mission ISS 6A. Hexagonal crystals were grown during three months under microgravity conditions. Diffraction data to 1.9A were collected applying synchrotron radiation and cryo- techniques. The structure was refined subsequently to analyse the structure of ML-I and particularly the active site conformation, complexed by adenine that mimics the RNA substrate binding.

Purification, crystallization and preliminary X-ray analysis of uridine phosphorylase from Salmonella typhimurium

The structural udp gene encoding uridine phosphorylase (UPh) was cloned from the Salmonella typhimurium chromosome and overexpressed in Escherichia coli cells. S. typhimurium UPh (StUPh) was purified to apparent homogeneity and crystallized. The primary structure of StUPh has high homology to the UPh from E. coli, but the enzymes differ substantially in substrate specificity and sensitivity to the polarity of the medium. Single crystals of StUPh were grown using hanging-drop vapor diffusion with PEG 8000 as the precipitant. X-ray diffraction data were collected to 2.9 A resolution. Preliminary analysis of the diffraction data indicated that the crystal belonged to space group P6(1(5)), with unit-cell parameters a = 92.3, c = 267.5 A. The solvent content is 37.7% assuming the presence of one StUPh hexamer per asymmetric unit.

Three-Dimensional Structure of Laccase from Coriolus zonatus at 2.6 Å Resolution

Laccase (oxygen oxidoreductase, EC 1.14.18.1) belongs to the copper-containing oxidases. This enzyme catalyzes reduction of molecular oxygen by different organic and inorganic compounds to water without the formation of hydrogen peroxide. The three-dimensional structure of native laccase from Coriolus zonatus was solved and refined at 2.6 Å resolution (Rfactor = 21.23%, Rfree = 23.82%, rms deviations for the bond lengths and bond angles are 0.008 Å and 1.19°, respectively). The primary structure of the polypeptide chain and the architecture of the active site were refined. The carbohydrate component of the enzyme was identified. The access and exit water channels providing the access of molecular oxygen to the active site and release of water, which is the reduction product of molecular oxygen, from the protein molecule were found in the structure.

X-ray structure of Salmonella typhimurium uridine phosphorylase complexed with 5-fluorouracil and molecular modelling of the complex of 5-fluorouracil with uridine phosphorylase from Vibrio cholerae.

Uridine phosphorylase (UPh), which is a key enzyme in the reutilization pathway of pyrimidine nucleoside metabolism, is a validated target for the treatment of infectious diseases and cancer. A detailed analysis of the interactions of UPh with the therapeutic ligand 5-fluorouracil (5-FUra) is important for the rational design of pharmacological inhibitors of these enzymes in prokaryotes and eukaryotes. Expanding on the preliminary analysis of the spatial organization of the active centre of UPh from the pathogenic bacterium Salmonella typhimurium (StUPh) in complex with 5-FUra [Lashkov et al. (2009), Acta Cryst. F65, 601-603], the X-ray structure of the StUPh-5-FUra complex was analysed at atomic resolution and an in silico model of the complex formed by the drug with UPh from Vibrio cholerae (VchUPh) was generated. These results should be considered in the design of selective inhibitors of UPhs from various species.

Comparative analysis of three-dimensional structures of homodimers of uridine phosphorylase from Salmonella typhimurium in the unligated state and in a complex with potassium ion

The spatial organization of the homodimer of unligated uridine phosphorylase from Salmonella typhimurium (St UPh) was determined with high accuracy. The structure was refined at 1.80 Å resolution to Rwork = 16.1% and Rfree = 20.0%. The rms deviations for the bond lengths, bond angles, and chiral angles are 0.006 Å, 1.042°, and 0.071°, respectively. The coordinate error estimated by the Luzzati plot is 0.166 Å. The coordinate error based on the maximum likelihood is 0.199 Å. A comparative analysis of the spatial organization of the homodimer in two independently refined structures and the structure of the homodimer St UPh in the complex with a K+ ion was performed. The substrate-binding sites in the homodimers StUPhs in the unligated state were found to act asynchronously. In the presence of a potassium ion, the three-dimensional structures of the subunits in the homodimer are virtually identical, which is apparently of importance for the synchronous action of both substrate-binding sites. The atomic coordinates of the refined structure of the homodimer and structure factors have been deposited in the Protein Data Bank (PDB ID code 3DPS).