A. Trejo

Ab-initio study of anisotropic and chemical surface modifications of β-SiC nanowires

The electronic band structure and electronic density of states of cubic SiC nanowires (SiCNWs) in the directions [001], [111], and [112] were studied by means of Density Functional Theory (DFT) based on the generalized gradient approximation and the supercell technique. The surface dangling bonds were passivated using hydrogen (H) atoms and OH radicals in order to study the effects of this passivation on the electronic states of the SiCNWs. The calculations show a clear dependence of the electronic properties of the SiCNWs on the quantum confinement, orientation, and chemical passivation of the surface. In general, surface passivation with either H or OH radicals removes the dangling bond states from the band gap, and OH saturation appears to produce a smaller band gap than H passivation. An analysis of the atom-resolved density of states showed that there is substantial charge transfer between the Si and O atoms in the OH-terminated case, which reduces the band gap compared to the H-terminated case, in which charge transfer mainly occurs between the Si and C atoms.

Computational simulation of the effects of oxygen on the electronic states of hydrogenated 3C-porous SiC

A computational study of the dependence of the electronic band structure and density of states on the chemical surface passivation of cubic porous silicon carbide (pSiC) was performed using ab initio density functional theory and the supercell method. The effects of the porosity and the surface chemistry composition on the energetic stability of pSiC were also investigated. The porous structures were modeled by removing atoms in the [001] direction to produce two different surface chemistries: one fully composed of silicon atoms and one composed of only carbon atoms. The changes in the electronic states of the porous structures as a function of the oxygen (O) content at the surface were studied. Specifically, the oxygen content was increased by replacing pairs of hydrogen (H) atoms on the pore surface with O atoms attached to the surface via either a double bond (X = O) or a bridge bond (X-O-X, X = Si or C). The calculations show that for the fully H-passivated surfaces, the forbidden energy band is larger for the C-rich phase than for the Si-rich phase. For the partially oxygenated Si-rich surfaces, the band gap behavior depends on the O bond type. The energy gap increases as the number of O atoms increases in the supercell if the O atoms are bridge-bonded, whereas the band gap energy does not exhibit a clear trend if O is double-bonded to the surface. In all cases, the gradual oxygenation decreases the band gap of the C-rich surface due to the presence of trap-like states.

Computational Modeling of the Size Effects on the Optical Vibrational Modes of H-Terminated Ge Nanostructures

The vibrational dispersion relations of porous germanium (pGe) and germanium nanowires (GeNWs) were calculated using the ab initio density functional perturbation theory with a generalized gradient approximation with norm-conserving pseudopotentials. Both pores and nanowires were modeled using the supercell technique. All of the surface dangling bonds were saturated with hydrogen atoms. To address the difference in the confinement between the pores and the nanowires, we calculated the vibrational density of states of the two materials. The results indicate that there is a slight shift in the highest optical mode of the Ge-Ge vibration interval in all of the nanostructures due to the phonon confinement effects. The GeNWs exhibit a reduced phonon confinement compared with the porous Ge due to the mixed Ge-dihydride vibrational modes around the maximum bulk Ge optical mode of approximately 300 cm−1; however, the general effects of such confinements could still be noticed, such as the shift to lower frequencies of the highest optical mode belonging to the Ge vibrations.

Modeling the effects of Si-X (X = F, Cl) bonds on the chemical and electronic properties of Si-surface terminated porous 3C-SiC

Abstract Porous silicon carbide offers a great potential as a sensor material for applications in medicine and energetics; however, the theoretical chemical characterization of its surface is almost nonexistent, and a correct understanding of its chemical properties could lead to the development of better applications of this nanostructure. Hence, a study of the effects of different passivation agents on the structure and electronic properties of porous silicon carbide by means of density functional theory and the supercell technique was developed. The porous structures were modeled by removing columns of atoms of an otherwise perfect SiC crystal in the [001] direction, so that the porous structure exhibits a surface exclusively composed of Si atoms (Si-rich) using different surface passivation agents, such as hydrogen (H), fluoride (F) and chloride (Cl). The results demonstrate that all of the passivation schemes exhibit an irregular band gap energy evolution due to a hybridization change of the surface. The structural analysis shows a great dependence of the bond characteristics on the electronegativity of the bonded atoms, and all of the structural and electronic changes could be explained due to steric effects. These results could be important in the characterization of pSiC because they provide insight into the most stable surface configurations and their electronic structures.

DFT study of the electronic structure of Cubic-SiC nanopores with a c-terminated surface

A study of the dependence of the electronic structure and energetic stability on the chemical surface passivation of cubic porous silicon carbide (pSiC) was performed using density functional theory (DFT) and the supercell technique. The pores were modeled by removing atoms in the [001] direction to produce a surface chemistry composed of only carbon atoms (C-phase). Changes in the electronic states of the porous structures were studied by using different passivation schemes: one with hydrogen (H) atoms and the others gradually replacing pairs of H atoms with oxygen (O) atoms, fluorine (F) atoms, and hydroxide (OH) radicals. The results indicate that the band gap behavior of the C-phase pSiC depends on the number of passivation agents (other than H) per supercell. The band gap decreased with an increasing number of F, O, or OH radical groups. Furthermore, the influence of the passivation of the pSiC on its surface relaxation and the differences in such parameters as bond lengths, bond angles, and cell volume are compared between all surfaces. The results indicate the possibility of nanostructure band gap engineering based on SiC via surface passivation agents.

Band-gap engineering of halogenated silicon nanowires through molecular doping

AbstractIn this work, we address the effects of molecular doping on the electronic properties of fluorinated and chlorinated silicon nanowires (SiNWs), in comparison with those corresponding to hydrogen-passivated SiNWs. Adsorption of n-type dopant molecules on hydrogenated and halogenated SiNWs and their chemisorption energies, formation energies, and electronic band gap are studied by using density functional theory calculations. The results show that there are considerable charge transfers and strong covalent interactions between the dopant molecules and the SiNWs. Moreover, the results show that the energy band gap of SiNWs changes due to chemical surface doping and it can be further tuned by surface passivation. We conclude that a molecular based ex-situ doping, where molecules are adsorbed on the surface of the SiNW, can be an alternative path to conventional doping. Graphical abstractMolecular doping of halogenated silicon nanowires

Electronic structure and optical vibrational modes of 3C–SiC nanowires

The electronic structure and vibrational optical modes of silicon carbide nanowires (SiCNWs) were studied using the first principles density functional theory. The nanowires were modelled along the [111] direction using the supercell technique passivating all the surface dangling bonds with H atoms, OH radicals and a combination of both. Results show that the full OH passivation lowers the band gap energy compared to the full H passivation owing to C–OH surface states. A shift of the highest optical vibrational modes of Si and C to lower frequency values compared to their bulk counterparts was observed in accordance with phonon confinement scheme.

Bidimensional perovskite systems for spintronic applications

AbstractThe half-metallic behavior of the perovskite Sr2FeMoO6 (SFMO) suggests that this material could be used in spintronic applications. Indeed, SFMO could be an attractive material for multiple applications due to the possibility that its electronic properties could be changed by modifying its spatial confinement or the relative contents of its constituent transition metals. However, there are no reports of theoretical studies on the properties of confined SFMOs with different transition metal contents. In this work, we studied the electronic properties of SFMO slabs using spin-polarized first-principles density functional theory along with the Hubbard-corrected local density approximation and a supercell scheme. We modeled three insulated SFMO slabs with Fe:Mo atomic ratios of 1:1, 1:0, and 0:1; all with free surfaces parallel to the (001) crystal plane. The results show that the half-metallicity of the SFMO is lost upon confinement and the material becomes a conductor, regardless of the ratio of Fe to Mo. It was also observed that the magnetic moment of the slab is strongly influenced by the oxygen atoms. These results could prove useful in attempts to apply SFMOs in fields other than spintronics. Graphical abstractLosing the metallic behaviour: density of states changes, around the Fermi level, due to the Fe/Mo ratio for bidimensional perovskite systems

Electronic states of lithium passivated germanium nanowires: An ab-initio study

A study of the electronic and structural properties of germanium nanowires (GeNWs) was performed using the ab-initio Density Functional Theory within the generalized gradient approximation where electron-ion interactions are described by ultrasoft pseudopotentials. To study the effects of the lithium in the surface of the GeNWs we compare the electronic band structures of Hydrogen passivated GeNWs with those of partial and totally Li passivated GeNWs. The nanowires were constructed in the [001], [111] and [110] directions, using the supercell model to create different wire diameters. The results show that in the case of partial Li passivation there are localized orbitals near the valence band maximum, which would create a p-doped-kind of state. The total Li passivation created metallic states for all the wires.