Abdelrahman M. Abdelgawad

Antimicrobial wound dressing nanofiber mats from multicomponent (chitosan/silver-NPs/polyvinyl alcohol) systems

Novel hybrid nanomaterials have been developed for antimicrobial applications. Here we introduce a green route to produce antibacterial nanofiber mats loaded with silver nanoparticles (Ag-NPs, 25 nm diameter) enveloped in chitosan after reduction with glucose. The nanofiber mats were obtained from colloidal dispersions of chitosan-based Ag-NPs blended with polyvinyl alcohol. Nanofibers (150 nm average diameter and narrow size distribution) were obtained by electrospinning and cross-linked with glutaraldhyde. The effect of crosslinking on the release of silver was studied by atomic absorption spectroscopy. Antimicrobial activity was studied by the viable cell-counting; mats loaded with silver and control samples (chitosan/PVA) with different degrees of cross-linking were compared for their effectiveness in reducing or halting the growth of aerobic bacteria. The results showed superior properties and synergistic antibacterial effects by combining chitosan with Ag-NPs.

Durable antibacterial and UV protections of in situ synthesized zinc oxide nanoparticles onto cotton fabrics.

Herein we represent a new discovery based on amine material called hexamethyltriethylene tetramine (HMTETA). We have observed that when an aqueous solution of Zn(NO3)·6H2O was added to aqueous solution of HMTETA followed by shaking for a time, the colorless solution was converted to milky color under the alkaline medium provided by HMTETA prior to formation of uniform zinc oxide nanoparticles (ZnO NPs). The latter are in situ formed within the cotton fabrics without the support of capping or other stabilizing agents. Obviously, then, the new made of formation of ZnO NPs speaks of a single-stage process where cotton fabric is immersed in a prepared solution of the new precursors through which binding of ZnO NPs into the textile fabrics takes place. Textile fabrics are, indeed, used as a template, which is capable of maintaining the size and surface distribution of the as-synthesized nanoparticles in a uniform domain. It is also likely that nanoparticles is confined inside the fibril and microfibrils of the cotton fibers. World-class facilities have been employed to follow up the synthesis of ZnO NPs, their characterization and their application to confer, in particular, high durable antibacterial and UV protective function on cotton fabrics.

Antibacterial activity of silver nanoparticles synthesized In-situ by solution spraying onto cellulose

Spray technique was used for the adsorption of in-situ silver nanoparticles (AgNPs) onto and inside the surface of nano- and micro- fibrillar cellulose (NFC and MFC) as well as filter paper. The abundance of hydroxyl and carboxyl groups located in NFC and MFC are used to stabilize Ag ions (Ag(+)) which were then in-situ reduced to (AgNPs) by chemical or UV reduction. The surface characteristic features, elemental analysis, particle size as well as size distribution of the obtained MFC, NFC and filter paper loaded with AgNPs were characterized via field emission scanning electron microscopy connected to energy dispersive X-ray spectroscopy (FESEM- EDX) and transmission electron microscopy (TEM). The associated chemical changes after growth of AgNPs onto the cellulose substrates were assessed by fourier transform infra-red (FT-IR) while the thermal stability of such systems were investigated by thermogravimetrical analyses (TGA). The antibacterial properties of AgNPs loaded NFC, MFC and filter paper as well was investigated against Escherichia Coli. The resulted data indicate that the particle size was found to be 11 and 26nm for AgNPs nucleated on NFC and MFC-based papers respectively. The antibacterial activity of AgNPs loaded MFC exhibited higher antibacterial activity than that of AgNPs loaded NFC. Overall, the present research demonstrates facile and fast method for in-situ antibacterial AgNPs loading on cellulose substrates.

Curdlan in fibers as carriers of tetracycline hydrochloride: Controlled release and antibacterial activity

Curdlan (CURD) and polyethylene oxide were used to synthesize nanofibers as carriers of hydro soluble tetracycline hydrochloride (TCH). The viscosity, surface tension and conductivity of the precursor multicomponent aqueous solutions were determined and adjusted to produce defect-free fiber webs. Except for a slight increase in diameter, the addition of TCH did not affect the original morphology of the CURD/PEO nanofibers, as determined by FE-SEM imaging. However, the thermal stability of the system was enhanced (TGA and DSC). Moreover, water resistance, as measured with 24-h immersion tests, was observed upon crosslinking with glutaraldehyde. In-vitro activity measurements indicated a sustained and controlled TCH time-release pattern and excellent antibacterial activity against E. coli, as assessed by UV-vis spectroscopy and viable cell counting, respectively. Overall, we propose nanofibers based on CURD as promising platforms for scaffolds for wound dressing and drug delivery.

Fabrication and characterization of bactericidal thiol-chitosan and chitosan iodoacetamide nanofibres

Two chitosan derivatives, namely, thiol-chitosan (TCs) and chitosan iodoacetamide (CsIA) were newly synthesized by reacting Cs with thiglycolic acid (TGA) and iodoacetic acid (IA) respectively. After being crosslinked with glutraldehyde (GA), the two derivatives were submitted to FT-IR and H1 NMR analysis for identification and characterization of their chemical features. As TCs and CsIA are water soluble, their electrospun nanofibres mats from aqueous solutions could be crosslinked and achieved using polyvinyl alcohol/Chitosan blend (PVA/Cs) polymers. Morphological structures of the obtained nanofibres and their webs were studied via those of TCs and CsIA free systems. The data also indicate that the crosslinked PVA/Cs/CsIA is more thermally stable than the crosslinked PVA/Cs/TCs and crosslinked PVA/Cs respectively. It was proved that the electrospun fibers containing TCs or CsIA display a superior antibacterial activity against negative bacteria E. Coli with a minimum inhibitory concentration (MIC) of 400μg/ml. These effects are rather in confirmation with bacterial kinetics essays which were also carried out in current work. Of particular interest is that the antimicrobial properties of fibers containing small concentration of either TCs or CsIA are much superior than those obtained with neat Cs electrospun nanofibres used as reference. By and large the results advocate the fibers webs containing TCs or CsIA as excellent candidates for wound dressing applications.

Developing lignin-based bio-nanofibers by centrifugal spinning technique

Lignin-based nanofibers were produced via centrifugal spinning from lignin-thermoplastic polyurethane polymer blends. The most suitable process parameters were chosen by optimization of the rotational speed, nozzle diameter and spinneret-to-collector distance using different blend ratios of the two polymers at different total polymer concentrations. The basic characteristics of polymer solutions were enlightened by their viscosity and surface tension. The morphology of the fibers produced was characterized by SEM, while their thermal properties by DSC and TG analysis. Multiply regression was used to determine the parameters that have higher impact on the fiber diameter. It was possible to obtain thermally stable lignin/polyurethane nanofibers with diameters below 500nm. From the aspect of spinnability, 1:1 lignin/TPU contents were shown to be more feasible. On the other side, the most suitable processing parameters were found to be angular velocity of 8500rpm for nozzles of 0.5mm diameter and working distance of 30cm.

Formulation and characterization of a plasma sterilized, pharmaceutical grade chitosan powder.

Chitosan has great potential as a pharmaceutical excipient. In this study, chitosan flake was micronized using cryo-ball and cryo-jet milling and subsequently sterilized with nitrogen plasma. Micronized chitosan was characterized by laser diffraction, scanning electron microscopy (SEM), conductometric titration, viscometry, loss on drying, FTIR, and limulus amebocyte lysate (LAL) assays. Cryo-jet milling produced mean particle size of 16.05μm, 44% smaller than cryo-ball milling. Cryomilled chitosan demonstrated increased hygroscopicity, but reduced molecular weight and degree of deacetylation (DD). SEM imaging showed highly irregular shapes. FTIR showed changes consistent with reduced DD and an unexplained shift at 1100cm(-1). Plasma treated chitosan was sterile with <2.5EU/g after low-pressure plasma and <1.3EU/g after atmospheric pressure plasma treatment. Plasma treatment decreased the reduced viscosity of chitosan flake and powder, with a greater effect on powder. In conclusion, pharmaceutical grade, sterile chitosan powder was produced with cryo-jet milling and plasma sterilization.