Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Abdul Aziz Jaafar is active.

Publication


Featured researches published by Abdul Aziz Jaafar.


ASME Turbo Expo 2007: Power for Land, Sea, and Air | 2007

Significance of Solar Radiation on Aircraft Engine Under Cowl Temperature

A.R. Abu Talib; Abdul Aziz Jaafar; A. S. Mokhtar; A. H. Razali

Literature on solar radiation effect on aircraft engine under cowl temperature is very limited. This paper describes an experimental work to quantify the effect of solar radiation levels on a range of aircraft engine nacelle surface finish and orientation in a representative way. The investigation was carried out on four aircraft engine nacelle representations during static ground running conditions. The nacelle models were fabricated using aluminium and surface coated with four different aircraft paint finish. Thermocouples were mounted at locations around the nacelle model. Effects of different solar radiation levels on the temperature distributions on the nacelles were presented. The contributions of radiative and convective heat transfer on the overall distribution of temperature inside the under cowl were quantified.Copyright


Experimental Thermal and Fluid Science | 2010

The basics and issues of Thermochromic Liquid Crystal Calibrations

Nadia Abdullah; Abd. Rahim Abu Talib; Abdul Aziz Jaafar; Mohamad Amran Mohd Salleh; W.T. Chong


Experimental Thermal and Fluid Science | 2009

Film thickness effects on calibrations of a narrowband thermochromic liquid crystal

Nadia Abdullah; Abd. Rahim Abu Talib; Helmey Ramdhaney Mohd Saiah; Abdul Aziz Jaafar; Mohamad Amran Mohd Salleh


Archive | 2011

Development of a hovercraft prototype with an aluminium hull base

Amirruddin Abdul Kadir; Mohd Sapuan Salit; Abdul Aziz Jaafar


Experimental Thermal and Fluid Science | 2010

Erratum to “Film thickness effects on calibrations of a narrowband thermochromic liquid crystal” [Experimental Thermal and Fluid Science 33 (2009) 561–578]

Nadia Abdullah; Abd. Rahim Abu Talib; Helmey Ramdhaney Mohd Saiah; Abdul Aziz Jaafar; Mohamad Amran Mohd Salleh


Archive | 2008

Extended conventional finite element method vs. differential quadrature method comparison in two-dimensional heat transfer problem

Md. Moslemuddin Fakir; Shahnor Basri; Renuganth Varatharajoo; Abdul Aziz Jaafar; Azmin Shakrine Mohd Rafie; Dayang Laila Abang Abdul Majid


International Journal on Heat and Mass Transfer - Theory and Applications (IREHEAT) | 2014

Comparison of Optimum Finite Element Method vs. Differential Quadrature Method in Two-dimensional Heat Transfer Problem

Md. Moslemuddin Fakir; Shahnor Basri; Renuganth Varatharajoo; Abdul Aziz Jaafar; Azmin Shakrine Mohd Rafie; Dayang Laila Abang Abdul Majid


Archive | 2009

Comparison of adhesives for thermocouple temperature measurements.

Nadia Abdullah; Abd. Rahim Abu Talib; Helmey Ramdhaney Mohd Saiah; Abdul Aziz Jaafar; Mohamad Amran Mohd Salleh


Archive | 2007

FLOW MEASUREMENTS DOWNSTREAM OF AN AXIAL FLOW FAN INSIDE AN OUTDOOR AIR CONDITIONING UNIT

A.R. Abu Talib; Abdul Aziz Jaafar; N. A Abdul Jalil; A. S. Mokhtar; Malaysia Selangor


Archive | 2006

Development of a testing facility for modelling cooling technique

Abdul Aziz Jaafar; Abd. Rahim Abu Talib; I. Abdul Rahim; Mohammad Nizam Filipski; Mohd Sapuan Salit

Collaboration


Dive into the Abdul Aziz Jaafar's collaboration.

Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

A. S. Mokhtar

Universiti Putra Malaysia

View shared research outputs
Top Co-Authors

Avatar

A.R. Abu Talib

Universiti Putra Malaysia

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Researchain Logo
Decentralizing Knowledge