Abdul Samad Khan

Preparation and characterization of a novel bioactive restorative composite based on covalently coupled polyurethane-nanohydroxyapatite fibres

Nanohydroxyapatite (n-HAp) was prepared using a sol-gel method. n-HAp powder was obtained from the gel form by heat treatment followed by grinding using ball milling. A novel polyurethane composite material was prepared by chemically binding the hydroxyapatite to the diisocyanate component in the polyurethane backbone through solvent polymerization. The procedure involved the stepwise addition of monomeric units of the polyurethane and optimizing the reagent concentrations. The resultant composite material was electrospun to form fibre mats. The fibres were less than 1mum in thickness and contained no beads or irregularities. Chemical structural characterization of both the ceramics and the novel polymers were carried out by Fourier transform infrared and Raman spectroscopy. X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy and Brunauer-Emmett-Teller surface area analysis were also employed to observe the crystal lattice and size and surface area of the n-HAp. Further characterization (by energy-dispersive X-ray analysis and SEM) of the spun fibres revealed the presence of elements associated with hydroxyapatite and polyurethane without the presence of any loose particles of hydroxyapatite, indicating the formation of the covalent bond between the ceramics and the polymer backbone.

An update on glass fiber dental restorative composites: A systematic review

Dentistry is a much developed field in the last few decades. New techniques have changed the conventional treatment methods as applications of new dental materials give better outcomes. The current century has suddenly forced on dentistry, a new paradigm regarding expected standards for state-of-the-art patient care. Within the field of restorative dentistry, the incredible advances in dental materials research have led to the current availability of esthetic adhesive restorations. The chemistry and structure of the resins and the nature of the glass fiber reinforced systems in dental composites are reviewed in relation to their influence and properties including mechanical, physical, thermal, biocompatibility, technique sensitivity, mode and rate of failure of restorations on clinical application. It is clear that a deeper understanding of the structure of the polymeric matrix and resin-based dental composite is required. As a result of ongoing research in the area of glass fiber reinforced composites and with the development and advancement of these composites, the future prospects of resin-based composite are encouraging.

Raman Spectroscopy of Natural Bone and Synthetic Apatites

Abstract Raman spectroscopy of natural bones and hydroxyapatites is described. In addition, how Raman spectroscopy has proved crucial in providing baseline data for the modification of synthetic apatite powders that are routinely used now as bone replacement materials is explained. It is important to understand the chemical structural properties of natural bone. Bone consists of two primary components: an inorganic or mineral phase, which is mainly a carbonated form of a nanoscale crystalline calcium phosphate, closely resembling hydroxyapatite, and an organic phase, which is composed largely of type I collagen fibers. Other constituents of bone tissue include water and organic molecules such as glycosaminoglycans, glycoproteins, lipids, and peptides. Ions such as sodium, magnesium, fluoride, and citrate are also present, as well as hydrogenophosphate. Hence, the mineral phase in bone may be characterized essentially as nonstoichiometric substituted apatite. Such a distinction is important in the development of synthetic calcium phosphates for application as skeletal implants. An understanding of bone function and its interfacial relationship to an implant clearly depends on the associated structure and composition. Therefore, it is essential to fully understand the chemical composition of bone, and Raman spectroscopy is an excellent technique for such an analysis.

Synthesis of piroxicam loaded novel electrospun biodegradable nanocomposite scaffolds for periodontal regeneration

Development of biodegradable composites having the ability to suppress or eliminate the pathogenic micro-biota or modulate the inflammatory response has attracted great interest in order to limit/repair periodontal tissue destruction. The present report includes the development of non-steroidal anti-inflammatory drug encapsulated novel biodegradable chitosan (CS)/poly(vinyl alcohol) (PVA)/hydroxyapatite (HA) electro-spun (e-spun) composite nanofibrous mats and films and study of the effect of heat treatment on fibers and films morphology. It also describes comparative in-vitro drug release profiles from heat treated and control (non-heat treated) nanofibrous mats and films containing varying concentrations of piroxicam (PX). Electrospinning was used to obtain drug loaded ultrafine fibrous mats. The physical/chemical interactions were evaluated by Fourier Transform Infrared (FT-IR) spectroscopy. The morphology, structure and pore size of the materials were investigated by scanning electron microscopy (SEM). The thermal behavior of the materials was investigated by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Control (not heat treated) and heat treated e-spun fibers mats and films were tested for in vitro drug release studies at physiological pH7.4 and initially, as per requirement burst release patterns were observed from both fibers and films and later sustained release profiles were noted. In vitro cytocompatibility was performed using VERO cell line of epithelial cells and all the synthesized materials were found to be non-cytotoxic. The current observations suggested that these materials are potential candidates for periodontal regeneration.

Effect of silanization of hydroxyapatite fillers on physical and mechanical properties of a bis-GMA based resin composite

To evaluate the physical and mechanical properties of an experimental bis-GMA-based resin composite incorporated with non-silanized and silanized nano-hydroxyapatite (nHAP) fillers. Experimental bis-GMA based resin composites samples which were reinforced with nHAP fillers were prepared. Filler particles were surface treated with a silane coupling agent. Five test groups were prepared: 1. Unfilled, 2. Reinforced with 10wt% and 30wt% non-silanized nHAP fillers, and 3. Reinforced with 10wt% and 30wt% silanized nHAP fillers. The samples were subjected to tests in dry condition and in deionized water, aged at 37°C for 30 days. Prepared silanized and non-silanized nHAP were analyzed with Fourier Transform Infrared (FTIR) Spectroscopy and X-ray Photoelectron Spectroscopy (XPS). The micro-hardness and water sorption were evaluated. Data were analyzed by one-way ANOVA (p<0.05). The samples were characterized by FTIR Spectroscopy, Thermogravimetric Analysis and Differential Scanning Calorimetry. The surface morphology of sample surfaces was examined by Scanning Electron Microscope (SEM). The results showed that the water sorption for nHAP fillers reinforced resins was significantly lower than unfilled resins. Surface hardness for resins reinforced with silane treated fillers was superior to unfilled and untreated fillers resins. The resin matrix loaded with 30wt% silanized-nHAP fillers would improve the physical and mechanical properties of a bis-GMA based resin.

Modifications in Glass Ionomer Cements: Nano-Sized Fillers and Bioactive Nanoceramics

Glass ionomer cements (GICs) are being used for a wide range of applications in dentistry. In order to overcome the poor mechanical properties of glass ionomers, several modifications have been introduced to the conventional GICs. Nanotechnology involves the use of systems, modifications or materials the size of which is in the range of 1–100 nm. Nano-modification of conventional GICs and resin modified GICs (RMGICs) can be achieved by incorporation of nano-sized fillers to RMGICs, reducing the size of the glass particles, and introducing nano-sized bioceramics to the glass powder. Studies suggest that the commercially available nano-filled RMGIC does not hold any significant advantage over conventional RMGICs as far as the mechanical and bonding properties are concerned. Conversely, incorporation of nano-sized apatite crystals not only increases the mechanical properties of conventional GICs, but also can enhance fluoride release and bioactivity. By increasing the crystallinity of the set matrix, apatites can make the set cement chemically more stable, insoluble, and improve the bond strength with tooth structure. Increased fluoride release can also reduce and arrest secondary caries. However, due to a lack of long-term clinical studies, the use of nano-modified glass ionomers is still limited in daily clinical dentistry. In addition to the in vitro and in vivo studies, more randomized clinical trials are required to justify the use of these promising materials. The aim of this paper is to review the modification performed in GIC-based materials to improve their physicochemical properties.

Applications of Raman Spectroscopy in Dentistry: Analysis of Tooth Structure

Abstract: Tooth enamel is the most mineralized tissue in the human body, and in this article the use of Raman spectroscopy for the analysis of tooth structure, a comparison with synthetic apatites, and use in dentistry are described. Spectral peaks that are related to dental hard and soft tissues are discussed, which provide crucial data in understanding the chemical structural properties of dentin and enamel. The Raman spectrum of dentin confirms the presence of crystalline phosphate-based minerals in dentin. Both dentin and enamel consist of two primary components: an inorganic or mineral phase that closely resembles hydroxyapatite and the Raman spectrum of dentin that confirms the presence of crystalline phosphate-based minerals in dentin. Hence, the mineral phase in dentin and enamel may be characterized essentially as nonstoichiometric substituted apatite. The presence of carbonate (A and B type) incorporated in the hydroxyapatite lattice is also confirmed by the presence of spectral bands. The organic phase, which is mainly composed of type I collagen, is confirmed by the spectral bands of amide I and amide II bands, tryptophan, and phenylalanine. Furthermore, these spectral bands associated with organic and inorganic parts of the enamel and dentin are useful in predicting early formation of carries formation.

Biological behavior of bioactive glasses and their composites

Bioactive glasses (BGs) as third generation biomaterials have the ability to form an interfacial bonding more rapidly than other bioceramics between implant and host tissues in defect treatment. Therefore, BGs have shown great applications in the field of bone tissue engineering, dental materials, skin and other tissue regeneration. This review is based on inorganic and organic BG composites being used in bone tissue engineering and summarizes current developments in improving the biological behavior of BGs and their composites. A main focus was given to highlight the role of BGs and their composites in osteogenic differentiation and angiogenesis, followed by their cytotoxicity, protein adsorption ability and antibacterial properties. BGs were found to enhance the cell proliferation and cell attachment without any toxic effects with a significant increase in metabolic activity and possess osteogenic properties. Organic and inorganic dopants have been used to improve their cytocompatibility, osteoconductivity and promote stem cell differentiation towards the osteogenic lineage. BGs have also been used as graft materials because of their significant role in angiogenesis, as they stimulate relevant cells (i.e. fibroblasts, osteoblasts and endothelial cells) to release angiogenic growth factors. They show good protein adsorption because they act as templates for the adsorption of proteins which in turn depends upon surface properties. Antibacterial effects were also observed in BGs as a result of the high aqueous pH value in body fluids due to the presence of alkaline ions. There has been significant research work performed on silica-based bioactive glasses but not much literature can be found on phosphate- and borate-based bioactive glasses, which have good solubility and degradation, respectively.

Novel meloxicam releasing electrospun polymer/ceramic reinforced biodegradable membranes for periodontal regeneration applications

Periodontal disease is associated with the destruction of periodontal tissues, along with other disorders/problems including inflammation of tissues and severe pain. This paper reports the synthesis of meloxicam (MX) immobilized biodegradable chitosan (CS)/poly(vinyl alcohol) (PVA)/hydroxyapatite (HA) based electrospun (e-spun) fibers and films. Electrospinning was employed to produce drug loaded fibrous mats, whereas films were generated by solvent casting method. In-vitro drug release from materials containing varying concentrations of MX revealed that the scaffolds containing higher amount of drug showed comparatively faster release. During initial first few hours fast release was noted from membranes and films; however after around 5h sustained release was achieved. The hydrogels showed good swelling property, which is highly desired for soft tissue engineered implants. To investigate the biocompatibility of our synthesized materials, VERO cells (epithelial cells) were selected and cell culture results showed that these all materials were non-cytotoxic and also these cells were very well proliferated on these synthesized scaffolds. These properties along with the anti-inflammatory potential of our fabricated materials suggest their effective utilization in periodontital treatments.

Structural and in vitro adhesion analysis of a novel covalently coupled bioactive composite.

The interfacial adhesion between a restorative composite and tooth is one of the major factors that determine the ultimate performance of composite restoration. A novel polyurethane (PU) composite material was prepared by chemically binding the nano-hydroxyapatite (nHA) to the diisocyanate component in the PU backbone by utilizing solvent polymerization. The procedure involved stepwise addition of monomeric units of the PU and optimizing the reagent concentrations. The resultant materials were characterized structurally (Raman Spectroscopy) and in vitro bioactive analysis was conducted in modified-simulated body fluid for periodical time intervals. The in vitro study evaluated the push-out bond strength of existing obturating material and novel covalently linked PU/nHA composites to dentin after long-term storage in deionized water and artificial saliva. Human extracted molar roots were filled with experimental samples and analyzed at predetermined time intervals. The shear bond strength of samples was measured and surface morphologies were evaluated. Covalent bond formation was achieved between PU and nHA without intermediate coupling agent. With the increase in concentration of nHA, the composite showed more bioactivity and adhesion toward tooth structure. Bond strength of this new composite were in accordance with obutrating material, therefore, the material can be used as an obturating material because of its direct adhesion with tooth structure.