Abdullah Al Farraj Aldosari

Effects of calcium phosphate composition in sputter coatings on in vitro and in vivo performance.

Calcium phosphate (CaP) ceramic coatings have been used to enhance the biocompatibility and osteoconductive properties of metallic implants. The chemical composition of these ceramic coatings is an important parameter, which can influence the final bone performance of the implant. In this study, the effect of phase composition of CaP-sputtered coatings was investigated on in vitro dissolution behavior and in vivo bone response. Coatings were prepared by a radio frequency (RF) magnetron sputtering technique; three types of CaP target materials were used to obtain coatings with different stoichiometry and calcium to phosphate ratios (hydroxyapatite (HA), α-tricalciumphosphate (α-TCP), and tetracalciumphosphate (TTCP)) were compared with non-coated titanium controls. The applied ceramic coatings were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and inductively coupled plasma optical emission spectroscopy. The in vitro dissolution/precipitation of the CaP coatings was evaluated using immersion tests in simulated body fluid (SBF). To mimic the in vivo situation, identical CaP coatings were also evaluated in a femoral condyle rabbit model. TCPH and TTCPH showed morphological changes during 4-week immersion in SBF. The results of bone implant contact (BIC) and peri-implant bone volume (BV) showed a similar response for all experimental coatings. An apparent increase in tartrate resistant acid phosphatase (TRAP) positive staining was observed in the peri-implant region with decreasing coating stability. In conclusion, the experimental groups showed different coating properties when tested in vitro and an apparent increase in bone remodeling with increasing coating dissolution in vivo.

In vivo evaluation of bioactive glass-based coatings on dental implants in a dog implantation model

OBJECTIVES Although titanium is commonly used as a favorable bone implant material due to its mechanical properties, its bioactive and osteoconductive capacity is relatively low. Calcium phosphate ceramics, predominantly hydroxyapatite (HA), have been frequently used for coating purposes to improve the bioactive properties. In view of the suggested osteopromotive capacity of bioactive glasses (BGs), this study aimed to evaluate the effect of BG incorporation into HA coatings on implant performance in terms of bone contact and bone area. MATERIALS AND METHODS A total of 48 screw-type titanium implants with magnetron sputter coatings containing different ratios of HA and BG (HA, HABGLow, and HABGHigh; n = 8) were placed into the mandible of 16 Beagle dogs. After 4 and 12 weeks, their performance was evaluated histologically and histomorphometrically. Peri-implant bone area percentage (BA%) was determined in three zones (inner, 0-500 μm; middle, 500-1000 μm; and outer, 1000-1500 μm). Additionally, bone-to-implant contact (BIC%) and first bone-implant contact (1st BIC) were assessed for each sample. RESULTS After 4 weeks, bone-to-implant contact for the HA- and HABGLow-coated groups was significantly higher (P < 0.05) than for the HABGHigh coatings. Mean values for overall BA% showed comparable values for both the HABGLow (58.3%)- and HABGHigh (56.3%)-coated groups. Data suggest that the relative BA around the HA-coated implants (67.8%) was higher, although this was only significant compared to the HABGHigh group. After 12 weeks, all three groups showed similar bone-to-implant contact and no differences in BA were found. CONCLUSIONS The incorporation of BG into HA sputter coatings did not enhance the performance of a dental implant in implantations sites with good bone quality and quantity. On the contrary, coatings containing high concentrations of BG resulted in inferior performance during the early postimplantation healing phase.

Peripheral Dentinogenic Ghost Cell Tumor Report of a Case and Literature Review

Peripheral dentinogenic ghost cell tumor is a rare tumor with only 24 cases previously described in the English literature. The majority of cases have been reported to occur in the anterior part of the jaws. A case occurring in posterior (molar region) of the mandible in a 75-year-old edentulous woman is reported. The patient presented with a nodular swelling in the left mandible that showed erosion (saucerization) of the underlying bone radiographically. On microscopy, the tumor showed mainly solid epithelial islands resembling ameloblastoma in fibrous connective tissue. The islands were associated with ghost cells and dysplastic dentin. This report includes the clinical, radiographic, and microscopic features of the patient, in addition to the review of the English literature on the tumor.

Study of the osseointegration of dental implants placed with an adapted surgical technique

OBJECTIVE To study the osseointegration of dental implants placed with a modified surgical technique in Beagle dogs and to compare it with the conventional method. MATERIALS AND METHODS Dental implants were placed bilaterally in the mandible of Beagle dogs using the press-fit as well as undersized implant bed preparation technique. Micro computer tomography (micro-CT) and histometric methods were used to analyze the bone implant contact and bone volume (BV) around the implants. RESULTS The bone-to-implant contact percentage (BIC: expressed as %), first BIC (1st BIC: expressed in mm), sulcus depth (SD: expressed in mm) and connective tissue thickness (CT: expressed in mm) were analyzed for both groups. The BIC percentage was significantly higher for the undersized installed implants (P=0.0118). Also, a significant difference existed between the undersized and press-fit installed implants for the first screw thread showing bone contact (P=0.0145). There were no significant differences in mucosal response (SD and CT) for both installation procedures. Also, no significant difference was found in the BV, as measured using micro-CT, between the implants placed with an undersized technique (59.3 ± 4.6) compared with the press-fit implants (56.6 ± 4.3). CONCLUSION From the observations of the study, it can be concluded that an undersized implant bed can enhance the implant-bone response.

Impact of Bone Quality and Implant Type on the Primary Stability: An Experimental Study Using Bovine Bone

The purpose of this in vitro study was to compare the primary stability and removal torque of bone level and tissue level implants in different bone qualities. Twenty tissue level and bone level implants (3.3 × 10 mm and 4.1 × 10 mm) were used for assessing the stability in type II and type IV bone. Forty bovine rib blocks were used in this study. The primary stability of the implant was measured by the resonance frequency using an Osstel device. The removal torque values (RTV) of the implants was assessed using a digital torque gauge instrument. The implant stability quotient (ISQ) values and the RTV showed a marginally higher stability with bone level implants as compared to tissue level implants. However, these differences were not statistically significant in both type of bone used (P > 0.05). On the other hand, compared to type IV, type II bone showed significant differences in the ISQ (P < 0.01) and RTV (P < 0.001) of bone level and tissue level implants. The study concluded that bone quality is an important factor in establishing primary stability than the implant dimension. Bone level and tissue level implants of same dimensions can be selected based on the esthetic demands since they showed similar mechanical properties.

Osseointegration of oral implants after delayed placement in rabbits: a microcomputed tomography and histomorphometric study

PURPOSE This study compared osseointegration of implants placed 14 days after implant site preparation with that of immediately placed implants in rabbit femurs. MATERIALS AND METHODS Implants were placed bilaterally in the femoral condyles of 12 rabbits. On one side, the implants were placed 14 days after osteotomy, and the other side received implants immediately after osteotomy. Healing was assessed by microcomputed tomography and histomorphometry. RESULTS The delayed implants (placed 14 days after osteotomy) showed better osseointegration than the immediately placed implants. Bone-to-implant contact and bone volume, as assessed by histomorphometry and microcomputed tomography, were significantly higher for the implants placed after 14 days. CONCLUSIONS From this study, it can be concluded that early osteotomy bed preparation and placement of implants after a 2-week delay predisposes to better bone-implant interface healing.

Analysis of urinary cathepsin C for diagnosing Papillon–Lefèvre syndrome

Papillon–Lefèvre syndrome (PLS) (OMIM: 245000) is a rare disease characterized by severe periodontitis and palmoplantar keratoderma. It is caused by mutations in both alleles of the cathepsin C (CatC) gene CTSC that completely abrogate the proteolytic activity of this cysteine proteinase. Most often, a genetic analysis to enable early and rapid diagnosis of PLS is unaffordable or unavailable. In this study, we tested the hypothesis that active CatC is constitutively excreted and can be easily traced in the urine of normal subjects. If this is true, determining its absence in the urine of patients would be an early, simple, reliable, low‐cost and easy diagnostic technique. All 75 urine samples from healthy control subjects (aged 3 months to 80 years) contained proteolytically active CatC and its proform, as revealed by kinetic analysis and immunochemical detection. Of the urine samples of 31 patients with a PLS phenotype, 29 contained neither proteolytically active CatC nor the CatC antigen, so that the PLS diagnosis was confirmed. CatC was detected in the urine of the other two patients, and genetic analysis revealed no loss‐of‐function mutation in CTSC, indicating that they suffer from a PLS‐like condition but not from PLS. Screening for the absence of urinary CatC activity soon after birth and early treatment before the onset of PLS manifestations will help to prevent aggressive periodontitis and loss of many teeth, and should considerably improve the quality of life of PLS patients.