Abhilash J. Chandy

A fluid-structure interaction (FSI)-based numerical investigation of peristalsis in an obstructed human ureter: A fluid-structure interaction (FSI)-based numerical investigation of peristalsis in an obstructed human ureter

Urine moves from the kidney to the bladder through the ureter. A series of compression waves facilitates this transport. Due to the highly concentrated mineral deposits in urine, stones are formed in the kidney and travel down through the urinary tract. While passing, a larger stone can get stuck and cause severe damage to ureter wall. Also, stones in the ureter obstructing the urine flow can cause pain and backflow of urine which in turn might require surgical intervention. The current study develops a 2D axisymmetric numerical model to gain an understanding of the ureter obstruction and its effects on the flow, which are critical in assessing the different treatment options. Transient computational analysis involving a two-way fully coupled fluid-structure interaction with the arbitrary Lagrangian-Eulerian method between the ureteral wall and urine flow is conducted with an obstruction in the ureter. The ureter wall is modeled as an anisotropic hyperelastic material, data of which, is based on biaxial tests on human ureter from previous literature, while the incompressible Navier-Stokes equations are solved to calculate urine flow. A finite element-based monolithic solver is used for the simulations here. The obstruction is placed in the fluid domain as a circular stone at the proximal part of the ureter. One of the objectives of this study is to quantify the effect of the ureteral obstruction. A sharp jump in pressure gradient and wall shear stress, as well as retrograde urine flow, is observed as a result of the obstruction.

A three-dimensional (3D) two-way coupled fluid-structure interaction (FSI) study of peristaltic flow in obstructed ureters

Obstruction in the ureter flow path is one of the most common problems in urinary-related diseases. As the ureter transports the urine using the expansion bolus created by the peristaltic pulses, an obstruction in its path can cause unwanted backflow and can also result in damage to the wall. But in order to understand this further, and specifically to quantify and parametrize the effect of the obstruction in the ureter, a detailed study investigating various level of obstructions in peristaltic ureter flow is necessary. In the current study, full 3D numerical simulations of peristalsis in an obstructed ureter are carried out using a finite element solver along with a two-way coupling between the fluid and structural domain with the arbitrary Eulerian-Lagrangian method. Analysis of the results shows that the larger the obstruction, the higher the wall shear stress and pressure gradient in the fluid. In addition, the amount of backflow increases with increase in the obstruction.

A two-dimensional numerical study of peristaltic contractions in obstructed ureter flows

Abstract The flow of urine from the kidneys to the bladder is accomplished via peristaltic contractions in the ureters. The peristalsis of urine through the ureter can sometimes be accompanied, more specifically, obstructed to a certain degree, by entities such as kidney stones. In this paper, 2D axisymmetric computational fluid dynamics simulations are carried out using the commercial code ANSYS FLUENT, to model the peristaltic movement of the ureter with and without stone. The peristaltic movement was assumed to be a sinusoidal wave on the boundary of the ureter with a specific physiological velocity. While the first part of the study considers flow in the ureter with prescribed peristaltic contractions in absence of any obstruction, the second part compares the effect of varying obstructions (0, 5, 15, and 35%) in terms of spherical stones of different sizes. Pressure contours, velocity vectors, and profiles of pressure gradient magnitudes and wall shear stresses are presented along one bolus of the ureter, during contraction and expansion of the ureteral wall, in order to understand backflow, trapping and reflux phenomena, as well as monitor the health of the ureteral wall in the presence of any obstruction. The 35% ureteral obstruction case resulted in a significant backflow at the inlet in comparison to the other cases, and also a wall shear stress that was up to 20x larger than the case without any obstruction.

An experimental and computational investigation of air-borne noise generation mechanisms in tires

The complex nature of the tire/road noise generation process makes it difficult to isolate and study each mechanism individually. This paper presents an experimental and numerical investigation of air-borne tire noise generation mechanisms for a realistic tire. Experimentally, a single slot is cut into the tire and the noise data are measured and studied. Air-borne noise is isolated by filling the slot with foam and comparing the resulting frequency spectra. Numerically, a previously developed computational fluid dynamics tire noise prediction model is employed to predict the air-borne noise for the same tire, under similar operating conditions. A direct comparison between the experimental and computational results is also presented in terms of pressure time traces and spectral characteristics. Comparisons indicate that the computational model is capable of predicting the noise generated by the air pockets in the tire. While providing a deeper understanding of the causes of air-borne noise, this paper also aims to demonstrate the use of a computational tool that can be used to obtain a reasonably accurate prediction of air-borne tire noise.

A two way fully coupled fluid structure simulation of human ureter peristalsis

Abstract Numerical simulations of ureter peristalsis have been carried out in the past to understand both the flow field and ureter wall mechanics. The main objective of the current investigations is to have a better understanding of the urine transport due to the peristalsis in the ureter, thus making the information helpful for a better treatment and diagnosis of ureteral complications like urine reflux. In the current study, a numerical simulation is performed using a finite-element-based solver with a two-way fully coupled fluid structure interaction approach between the ureter wall and urine. For the first time, the ureter wall is modeled as an anisotropic hyper-elastic material based on experiments performed in previous literature on the human ureter. Peristalsis in the ureter is modeled as a series of isolated boluses. By observing the flow field it is clear that the peristalsis mechanism has a natural tendency to create a backflow as the isolated bolus moves forward. As a result, the urine can flow back from the bladder to the ureter at the ureterovesical (ureter-bladder) junctions, if the one-way valve starts to malfunction.