Aboubakr M. Abdullah

An Interface Coassembly in Biliquid Phase: Toward Core-Shell Magnetic Mesoporous Silica Microspheres with Tunable Pore Size.

Core-shell magnetic mesoporous silica microspheres (Magn-MSMs) with tunable large mesopores in the shell are highly desired in biocatalysis, magnetic bioseparation, and enrichment. In this study, a shearing assisted interface coassembly in n-hexane/water biliquid systems is developed to synthesize uniform Magn-MSMs with magnetic core and mesoporous silica shell for an efficient size-selective biocatalysis. The synthesis features the rational control over the electrostatic interaction among cationic surfactant molecules, silicate oligomers, and Fe3O4@RF microspheres (RF: resorcinol formaldehyde) in the presence of shearing-regulated solubilization of n-hexane in surfactant micelles. Through this multicomponent interface coassembly, surfactant-silica mesostructured composite has been uniformly deposited on the Fe3O4@RF microspheres, and core-shell Magn-MSMs are obtained after removing the surfactant and n-hexane. The obtained Magn-MSMs possess excellent water dispersibility, uniform diameter (600 nm), large and tunable perpendicular mesopores (5.0-9.0 nm), high surface area (498-623 m(2)/g), large pore volume (0.91-0.98 cm(3)/g), and high magnetization (34.5-37.1 emu/g). By utilization of their large and open mesopores, Magn-MSMs with a pore size of about 9.0 nm have been demonstrated to be able to immobilize a large bioenzyme (trypsin with size of 4.0 nm) with a high loading capacity of ∼97 μg/mg via chemically binding. Magn-MSMs with immobilized trypsin exhibit an excellent convenient and size selective enzymolysis of low molecular proteins in the mixture of proteins of different sizes and a good recycling performance by using the magnetic separability of the microspheres.

Ultradispersed Palladium Nanoparticles in Three-Dimensional Dendritic Mesoporous Silica Nanospheres: Toward Active and Stable Heterogeneous Catalysts

Immobilization of highly monodispersed palladium nanoparticles in colloidal mesoporous silica supports has been successfully achieved. The Pd nanoparticles with a uniform small size of ∼1.2 nm can be homogeneously distributed in individual mesopore channels of amino group-functionalized three-dimensional dendritic mesoporous silica nanospheres (3D-dendritic MSNSs) with a Pd content of ∼2.8%. The 3D-dendritic MSNSs-based nanoreactors show high activity in Suzuki-Miyaura cross-coupling reactions of bromobenzene with phenylboronic acid, obtaining a yield over 99% with 0.075 mol % Pd catalyst at room temperature in the dark within 12 h. More importantly, the excellent catalytic performance can be maintained with a negligible decrease lasting at least six cycles. It further reveals that the mesoporous frameworks of the colloidal silica supports can be well-preserved after four catalytic runs; meanwhile, the Pd nanoparticles in the mesopore channels also can remain the sizes of 1.5±0.3 nm without significant transfer and aggregation. The unique mesostructure of the 3D-dendritic MSNSs with mesopore channels of short length and large diameter is supposed to be the key role in immobilization of active and robust heterogeneous catalysts, and it would have more hopeful prospects in catalytic applications.

Review of recent research on biomedical applications of electrospun polymer nanofibers for improved wound healing

Wound dressings play an important role in a patients recovery from health problems, as unattended wounds could lead to serious complications such as infections or, ultimately, even death. Therefore, wound dressings since ancient times have been continuously developed, starting from simple dressings from natural materials for covering wounds to modern dressings with functionalized materials to aid in the wound healing process and enhance tissue repair. However, understanding the nature of a wound and the subsequent healing process is vital information upon which dressings can be tailored to ensure a patients recovery. To date, much progress has been made through the use of nanomedicine in wound healing due to the ability of such materials to mimic the natural dimensions of tissue. This review provides an overview of recent studies on the physiology of wound healing and various wound dressing materials made of nanofibers fabricated using the electrospinning technique.

Highly Ordered Nanoporous Carbon Films with Tunable Pore Diameters and their Excellent Sensing Properties

Ordered porous carbon films with tunable pore diameters, immobilized with glucose oxidase (GOD) have been fabricated and employed for the construction of a biosensor for glucose molecules. The as-prepared porous films have large specific surface areas and highly ordered porous structure with uniform pore sizes, which are critical for the immobilization of large amounts of GOD and support the promotion of heterogeneous electron transfer. The developed biosensors give enough room for the encapsulation of a high amount of GOD molecules and show excellent biosensing performance with a linear response to glucose concentration ranging from 0.5 to 9 mM and a detection limit of 1.5 μM. It is also demonstrated that the sensitivity of the biosensor can be easily tuned by modulating the pore size of carbon film as it dictates the amount of immobilization of GOD in the porous channels. The fabricated carbon-film-based biosensor has a good stability and a high reproducibility, which opens the gateway for the commercialization of this excellent technology.

Safety and efficacy of an escalating dose regimen of pegylated interferon alpha-2b in the treatment of haemodialysis patients with chronic hepatitis C.

Summary.  Chronic hepatitis C is associated with increased morbidity and mortality in persons undergoing haemodialysis. This single‐arm, open‐label clinical trial investigated the safety and efficacy of an escalating dosage regimen of pegylated interferon (PEG‐IFN) alpha‐2b in this patient population. Patients with chronic hepatitis C who were undergoing haemodialysis began treatment with PEG‐IFN alpha‐2b at a dose of 0.5 μg/kg/week, which was increased every 4 weeks to a maximum of 1 μg/kg/week. Treatment duration was 24 weeks for patients with genotype (G) 2 or 3 infection and 48 weeks for patients with G1 infection. The primary end point was sustained virological response (SVR). Of 46 patients screened, 34 (G1: 70.6%; G3: 29.4%) were treated and 23 (67.6%) completed treatment. Overall, 85.3% of patients experienced early virological response, 52.9% experienced end‐of‐treatment response, and 50% attained SVR, with a trend toward higher SVR rates in G3 compared with G1 patients (80%vs 37.5%; P = 0.06). Anaemia was the main reason for discontinuation of treatment. Patients with chronic hepatitis C who are undergoing haemodialysis can be successfully treated with an escalating dosage regimen of PEG‐IFN alpha‐2b monotherapy. G3‐infected patients can attain high rates of SVR with only 24 weeks of therapy.

Synthesis, characterization, and antimicrobial properties of novel double layer nanocomposite electrospun fibers for wound dressing applications

Herein, novel hybrid nanomaterials were developed for wound dressing applications with antimicrobial properties. Electrospinning was used to fabricate a double layer nanocomposite nanofibrous mat consisting of an upper layer of poly(vinyl alcohol) and chitosan loaded with silver nanoparticles (AgNPs) and a lower layer of polyethylene oxide (PEO) or polyvinylpyrrolidone (PVP) nanofibers loaded with chlorhexidine (as an antiseptic). The top layer containing AgNPs, whose purpose was to protect the wound site against environmental germ invasion, was prepared by reducing silver nitrate to its nanoparticulate form through interaction with chitosan. The lower layer, which would be in direct contact with the injured site, contained the antibiotic drug needed to avoid wound infections which would otherwise interfere with the healing process. Initially, the upper layer was electrospun, followed sequentially by electrospinning the second layer, creating a bilayer nanofibrous mat. The morphology of the nanofibrous mats was studied by scanning electron microscopy and transmission electron microscopy, showing successful nanofiber production. X-ray diffraction confirmed the reduction of silver nitrate to AgNPs. Fourier transform infrared spectroscopy showed a successful incorporation of the material used in the produced nanofibrous mats. Thermal studies carried out by thermogravimetric analysis indicated that the PVP–drug-loaded layer had the highest thermal stability in comparison to other fabricated nanofibrous mats. Antimicrobial activities of the as-synthesized nanofibrous mats against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans were determined using disk diffusion method. The results indicated that the PEO–drug-loaded mat had the highest antibacterial activity, warranting further attention for numerous wound-healing applications.

Synthesis and characterisation of Ni–B/Ni–P–CeO2 duplex composite coatings

Binary (Ni–B, Ni–P) and duplex coatings (Ni–B/Ni–P, Ni–B/Ni–P–CeO2) with an inner Ni–B layer were electrodeposited on mild steel substrates. A comparison of the structural, surface, mechanical, and electrochemical properties of the coatings is presented to demonstrate the mechanical behaviour and corrosion protection performance. Scanning electron microscope and atomic force microscope images showed that Ni–B/Ni–P–CeO2 duplex coatings had a well-defined nodular structure compared to Ni–P coatings, and fewer surface defects compared to Ni–B and Ni–B/Ni–P duplex coatings. However, these coatings had high surface roughness owing to the presence of CeO2 ceramic particles. X-ray diffraction analysis revealed that Ni–B coatings were crystalline but Ni–P and Ni–B/Ni–P–CeO2 coatings exhibited an amorphous structure. Ni–B/Ni–P–CeO2 coatings exhibited superior hardness (15%) compared to Ni–P and Ni–B/Ni–P duplex coatings. Potentiodynamic polarisation results confirmed that Ni–B/Ni–P–CeO2 duplex coatings had superior corrosion protection efficiency (91%) compared to Ni–B (30%) and duplex Ni–B/Ni–P coatings (77%). The novel Ni–B/Ni–P–CeO2 duplex coatings demonstrated superior mechanical and promising anti-corrosion properties, which render them attractive for various applications.Graphical Abstract

An efficient eco advanced oxidation process for phenol mineralization using a 2D/3D nanocomposite photocatalyst and visible light irradiations

Nanocomposites (CNTi) with different mass ratios of carbon nitride (C3N4) and TiO2 nanoparticles were prepared hydrothermally. Different characterization techniques were used including X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), transmission electron spectroscopy (TEM) and Brunauer-Emmett-Teller (BET). UV-Vis DRS demonstrated that the CNTi nanocomposites exhibited absorption in the visible light range. A sun light - simulated photoexcitation source was used to study the kinetics of phenol degradation and its intermediates in presence of the as-prepared nanocomposite photocatalysts. These results were compared with studies when TiO2 nanoparticles were used in the presence and absence of H2O2 and/or O3. The photodegradation of phenol was evaluated spectrophotometrically and using the total organic carbon (TOC) measurements. It was observed that the photocatalytic activity of the CNTi nanocomposites was significantly higher than that of TiO2 nanoparticles. Additionally, spectrophotometry and TOC analyses confirmed that degraded phenol was completely mineralized to CO2 and H2O with the use of CNTi nanocomposites, which was not the case for TiO2 where several intermediates were formed. Furthermore, when H2O2 and O3 were simultaneously present, the 0.1% g-C3N4/TiO2 nanocomposite showed the highest phenol degradation rate and the degradation percentage was greater than 91.4% within 30 min.

Anti-corrosive and oil sensitive coatings based on epoxy/polyaniline/magnetite-clay composites through diazonium interfacial chemistry

Epoxy polymer nanocomposites filled with magnetite (Fe3O4) clay (B), named (B-DPA-PANI@Fe3O4) have been prepared at different filler loading (0.1, 0.5, 1, 3, 5 wt. %). The surface modification of clay by polyaniline (PANI) is achieved in the presence of 4-diphenylamine diazonium salt (DPA). The effects of the nanofiller loading on Tensile, mechanical and dielectric properties were systematically studied. Improved properties was highlighted for all reinforced samples. The addition of only 3 wt. % of the filler enhanced the tensile strength of the composites by 256%, and the glass transition temperature Tg by 37%. The dielectric spectra over a broad frequency showed a robust interface between the hybrid (B-DPA-PANI@Fe3O4) fillers and epoxy matrix. The results showed most significant improvement in corrosion inhibition using electrochemical impedance spectroscopy (EIS) in 3.5 wt % NaCl, as well as a significant response in oil sensing test. High charge transfer resistance of 110 × 106 Ω.cm2 using 3-wt % of filler was noted compared to 0.35 × 106 Ω.cm2 for the pure epoxy. The results obtained herein will open new routes for the preparation of efficient anticorrosion sensor coatings.

Enhanced photocatalytic performance of WON@porous TiO2 nanofibers towards sunlight-assisted degradation of organic contaminants

In the last few decades, TiO2 has been widely used in different types of photocatalytic applications. However, the relatively large optical band gap (∼3.2 eV), low charge carrier mobility and consequently its low quantum efficiency limit its photocatalytic activity. Herein, we construct a novel nanostructured heterojunction of WON/TiO2 nanofibers (NFs) by integration of TiO2 nanofibers synthesized by electrospinning of a polymer solution containing a titanium(IV) butoxide precursor with WON nanoparticles fabricated via annealing of a WO3 precursor in dry ammonia at 700 °C. The synthesized photocatalysts were characterized using different spectroscopic techniques. Their photocatalytic performance towards the degradation of methyl orange, methylene blue, and phenol as model contaminants was investigated and the charge transfer process was elucidated and compared to that of a TiO2/WO3 heterojunction.