Adinarayana Andukuri

Cell infiltration and growth in a low density, uncompressed three-dimensional electrospun nanofibrous scaffold.

A limiting factor of traditional electrospinning is that the electrospun scaffolds consist entirely of tightly packed nanofiber layers that only provide a superficial porous structure due to the sheet-like assembly process. This unavoidable characteristic hinders cell infiltration and growth throughout the nanofibrous scaffolds. Numerous strategies have been tried to overcome this challenge, including the incorporation of nanoparticles, using larger microfibers, or removing embedded salt or water-soluble fibers to increase porosity. However, these methods still produce sheet-like nanofibrous scaffolds, failing to create a porous three-dimensional scaffold with good structural integrity. Thus, we have developed a three-dimensional cotton ball-like electrospun scaffold that consists of an accumulation of nanofibers in a low density and uncompressed manner. Instead of a traditional flat-plate collector, a grounded spherical dish and an array of needle-like probes were used to create a Focused, Low density, Uncompressed nanoFiber (FLUF) mesh scaffold. Scanning electron microscopy showed that the cotton ball-like scaffold consisted of electrospun nanofibers with a similar diameter but larger pores and less-dense structure compared to the traditional electrospun scaffolds. In addition, laser confocal microscopy demonstrated an open porosity and loosely packed structure throughout the depth of the cotton ball-like scaffold, contrasting the superficially porous and tightly packed structure of the traditional electrospun scaffold. Cells seeded on the cotton ball-like scaffold infiltrated into the scaffold after 7 days of growth, compared to no penetrating growth for the traditional electrospun scaffold. Quantitative analysis showed approximately a 40% higher growth rate for cells on the cotton ball-like scaffold over a 7 day period, possibly due to the increased space for in-growth within the three-dimensional scaffolds. Overall, this method assembles a nanofibrous scaffold that is more advantageous for highly porous interconnectivity and demonstrates great potential for tackling current challenges of electrospun scaffolds.

A Nitric Oxide Releasing, Self Assembled Peptide Amphiphile Matrix that Mimics Native Endothelium for Coating Implantable Cardiovascular Devices

Cardiovascular disease is the number one cause of death in the United States. Deployment of stents and vascular grafts has been a major therapeutic method for treatment. However, restenosis, incomplete endothelialization, and thrombosis hamper the long term clinical success. As a solution to meet these current challenges, we have developed a native endothelial ECM mimicking self-assembled nanofibrous matrix to serve as a new treatment model. The nanofibrous matrix is formed by self-assembly of peptide amphiphiles (PAs), which contain nitric oxide (NO) donating residues, endothelial cell adhesive ligands composed of YIGSR peptide sequence, and enzyme-mediated degradable sites. NO was successfully released from the nanofibrous matrix rapidly within 48 h, followed by sustained release over period of 30 days. The NO releasing nanofibrous matrix demonstrated a significantly enhanced proliferation of endothelial cells (51+/-3% to 67+/-2%) but reduced proliferation of smooth muscle cells (35+/-2% to 16+/-3%) after 48 h of incubation. There was also a 150-fold decrease in platelet attachment on the NO releasing nanofibrous matrix (470+/-220 platelets/cm(2)) compared to the collagen-I (73+/-22 x 10(3)platelets/cm(2)) coated surface. The nanofibrous matrix has the potential to be applied to various cardiovascular implants as a self-assembled coating, thereby providing a native endothelial extracellular matrix (ECM) mimicking environment.

Modulating the Gelation Properties of Self-Assembling Peptide Amphiphiles

Peptide amphiphiles (PAs) are self-assembling molecules that form interwoven nanofiber gel networks. They have gained a lot of attention because of their excellent biocompatibility, adaptable peptide structure that allows for specific biochemical functionality, and nanofibrous assembly that mimics natural tissue formation. However, variations in molecule length, charge, and intermolecular bonding between different bioactive PAs cause contrasting mechanical properties. This potentially limits cell-delivery therapies because scaffold durability is needed to withstand the rigors of clinician handling and transport to wound implant sites. Additionally, the mechanical properties have critical influence on cellular behavior, as the elasticity and stiffness of biomaterials have been shown to affect cell spreading, migration, contraction, and differentiation. Several different PAs have been synthesized, each endowed with specific cellular adhesive ligands for directed biological response. We have investigated mechanical means for modulating and stabilizing the gelation properties of PA hydrogels in a controlled manner. A more stable, biologically inert PA (PA-S) was synthesized and combined with each of the bioactive PAs. Molar ratio (M(r) = PA/PA-S) combinations of 3:1, 1:1, and 1:3 were tested. All PA composites were characterized by observed nanostructure and rheological analysis measuring viscoelasticity. It was found that the PAs could be combined to successfully control and stabilize the gelation properties, allowing for a mechanically tunable scaffold with increased durability. Thus, the biological functionality and natural degradability of PAs can be provided in a more physiologically relevant microenvironment using our composite approach to modulate the mechanical properties, thereby improving the vast potential for cell encapsulation and other tissue engineering applications.

A hybrid biomimetic nanomatrix composed of electrospun polycaprolactone and bioactive peptide amphiphiles for cardiovascular implants

Current cardiovascular therapies are limited by the loss of endothelium, restenosis and thrombosis. The goal of this study was to develop a biomimetic hybrid nanomatrix that combined the unique properties of electrospun polycaprolactone (ePCL) nanofibers with self-assembled peptide amphiphiles (PAs). ePCL nanofibers have interconnected nanoporous structures, but are hampered by a lack of surface bioactivity to control cellular behavior. It has been hypothesized that PAs could self-assemble onto the surface of ePCL nanofibers and endow them with the characteristic properties of native endothelium. The PAs, which comprised hydrophobic alkyl tails attached to functional hydrophilic peptide sequences, contained enzyme-mediated degradable sites coupled to either endothelial cell-adhesive ligands (YIGSR) or polylysine (KKKKK) nitric oxide (NO) donors. Two different PAs (PA-YIGSR and PA-KKKKK) were successfully synthesized and mixed in a 90:10 (YK) ratio to obtain PA-YK. PA-YK was reacted with pure NO to develop PA-YK-NO, which was then self-assembled onto ePCL nanofibers to generate a hybrid nanomatrix, ePCL-PA-YK-NO. Uniform coating of self-assembled PA nanofibers on ePCL was confirmed by transmission electron microscopy. Successful NO release from ePCL-PA-YK-NO was observed. ePCL-YK and ePCL-PA-YK-NO showed significantly increased adhesion of human umbilical vein endothelial cells (HUVECs). ePCL-PA-YK-NO also showed significantly increased proliferation of HUVECs and reduced smooth muscle cell proliferation. ePCL-PA-YK-NO also displayed significantly reduced platelet adhesion compared with ePCL, ePCL-PA-YK and a collagen control. These results indicate that this hybrid nanomatrix has great potential application in cardiovascular implants.

Effect of endothelium mimicking self-assembled nanomatrices on cell adhesion and spreading of human endothelial cells and smooth muscle cells

UNLABELLED The goal of this study is to develop unique native endothelium mimicking nanomatrices and evaluate their effects on adhesion and spreading of human umbilical vein endothelial cells (HUVECs) and aortic smooth muscle cells (AoSMCs). These nanomatrices were developed by self-assembly of peptide amphiphiles (PAs) through a solvent evaporation technique. Three PAs, one containing the Tyr-Ile-Gly-Ser-Arg (YIGSR) ligand, the second containing the Val-Ala-Pro-Gly (VAPG) ligand, and a third without cell adhesive ligands, were developed. Cell adhesion and spreading were evaluated by a PicoGreen-DNA assay and live/dead assay, respectively. Our results show that PA-YIGSR significantly enhances HUVEC adhesion (26,704 +/- 2708), spreading (84 +/- 8%), and proliferation (50 +/- 2%) compared with that of other PAs. PA-VAPG and PA-YIGSR showed significantly greater AoSMC adhesion compared with that of PA-S. PA-VAPG also showed significantly greater spreading of AoSMCs (63 +/- 11%) compared with that of other PAs. Also, all the PAs showed significantly reduced platelet adhesion compared with that of collagen I (control). These findings would facilitate the development of novel vascular grafts, heart valves, and cell-based therapies for cardiovascular diseases. FROM THE CLINICAL EDITOR The goal of this study was to develop unique native endothelium mimicking nanomatrices and evaluate their effects on adhesion and spreading of human umbilical vein endothelial cells (HUVECs) and aortic smooth muscle cells (AoSMCs). These nanomatrices were developed by self-assembly of peptide amphiphiles through a solvent evaporation technique. The findings are expected to facilitate the development of novel vascular grafts, heart valves, and cell based therapies for cardiovascular diseases.

Cell therapy with embryonic stem cell-derived cardiomyocytes encapsulated in injectable nanomatrix gel enhances cell engraftment and promotes cardiac repair

A significant barrier to the therapeutic use of stem cells is poor cell retention in vivo. Here, we evaluate the therapeutic potential and long-term engraftment of cardiomyocytes (CMs) derived from mouse embryonic stem cells (mESCs) encapsulated in an injectable nanomatrix gel consisting of peptide amphiphiles incorporating cell adhesive ligand Arg-Gly-Asp-Ser (PA-RGDS) in experimental myocardial infarction (MI). We cultured rat neonatal CMs in PA-RGDS for 7 days and found that more than 90% of the CMs survived. Next, we intramyocardially injected mouse CM cell line HL-1 CMs with or without PA-RGDS into uninjured hearts. Histologic examination and flow cytometry analysis of digested heart tissues showed approximately 3-fold higher engraftment in the mice that received CMs with PA-RGDS compared to those without PA-RGDS. We further investigated the therapeutic effects and long-term engraftment of mESC-CMs with PA-RGDS on MI in comparison with PBS control, CM-only, and PA-RGDS only. Echocardiography demonstrated that the CM-only and CM+PA-RGDS groups showed higher cardiac function at week 2 compared to other groups. However, from 3 weeks, higher cardiac function was maintained only in the CM+PA-RGDS group; this was sustained for 12 weeks. Confocal microscopic examination of the cardiac tissues harvested at 14 weeks demonstrated sustained engraftment and integration of mESC-CMs into host myocardium in the CM+PA-RGDS group only. This study for the first time demonstrated that PA-RGDS encapsulation can enhance survival of mESC-derived CMs and improve cardiac function post-MI. This nanomatrix gel-mediated stem cell therapy can be a promising option for treating MI.

A hybrid biomimetic scaffold composed of electrospun polycaprolactone nanofibers and self-assembled peptide amphiphile nanofibers

Nanofibrous electrospun poly (epsilon-caprolactone) (ePCL) scaffolds have inherent structural advantages, but lack of bioactivity has limited their usefulness in biomedical applications. Thus, here we report the development of a hybrid, nanostructured, extracellular matrix (ECM) mimicking scaffold by a combination of ePCL nanofibers and self-assembled peptide amphiphile (PA) nanofibers. The PAs have ECM mimicking characteristics including a cell adhesive ligand (RGDS) and matrix metalloproteinase-2 (MMP-2) mediated degradable sites. Transmission electron microscope imaging verified successful PA self-assembly into nanofibers (diameters of 8-10 nm) using a solvent evaporation method. This evaporation method was then used to successfully coat PAs onto ePCL nanofibers (diameters of 300-400 nm), to develop hybrid, bioactive scaffolds. Scanning electron microscope characterization showed that the PA coatings did not interfere with the porous ePCL nanofiber network. Human mesenchymal stem cells (hMSCs) were seeded onto the hybrid scaffolds to evaluate their bioactivity. Significantly greater attachment and spreading of hMSCs were observed on ePCL nanofibers coated with PA-RGDS as compared to ePCL nanofibers coated with PA-S (no cell adhesive ligand) and uncoated ePCL nanofibers. Overall, this novel strategy presents a new solution to overcome the current bioactivity challenges of electrospun scaffolds and combines the unique characteristics of ePCL nanofibers and self-assembled PA nanofibers to provide an ECM mimicking environment. This has great potential to be applied to many different electrospun scaffolds for various biomedical applications.

Improved MIN6 β-Cell Function on Self-Assembled Peptide Amphiphile Nanomatrix Inscribed with Extracellular Matrix-Derived Cell Adhesive Ligands†

Understanding the role of the pancreatic extracellular matrix (ECM) in supporting islet survival and function drives the pursuit to create biomaterials that imitate and restore the pancreatic ECM microenvironment. To create an ECM mimic holding bioinductive cues for β-cells, self-assembled peptide amphiphiles (PAs) inscribed with four selected ECM-derived cell adhesive ligands are synthesized. After 7 days, compared to control groups cultured on biologically inert substrates, MIN6 β-cells cultured on PAs functionalized with YIGSR and RGDS cell adhesive ligands exhibit elevated insulin secretion in responses to glucose and also form β-cell clusters. These findings suggest that the self-assembled PA nanomatrix may be utilized to improve pancreatic islet transplantation for treating type 1 diabetes.

Evaluation of the effect of expansion and shear stress on a self-assembled endothelium mimicking nanomatrix coating for drug eluting stents in vitro and in vivo

Coating stability is increasingly recognized as a concern impacting the long-term effectiveness of drug eluting stents (DES). In particular, unstable coatings have been brought into focus by a recently published report (Denardo et al 2012 J. Am. Med. Assoc. 307 2148-50). Towards the goal of overcoming current challenges of DES performance, we have developed an endothelium mimicking nanomatrix coating composed of peptide amphiphiles that promote endothelialization, but limit smooth muscle cell proliferation and platelet adhesion. Here, we report a novel water evaporation based method to uniformly coat the endothelium mimicking nanomatrix onto stents using a rotational coating technique, thereby eliminating residual chemicals and organic solvents, and allowing easy application to even bioabsorbable stents. Furthermore, the stability of the endothelium mimicking nanomatrix was analyzed after force experienced during expansion and shear stress under simulated physiological conditions. Results demonstrate uniformity and structural integrity of the nanomatrix coating. Preliminary animal studies in a rabbit model showed no flaking or peeling, and limited neointimal formation or restenosis. Therefore, it has the potential to improve the clinical performance of DES by providing multifunctional endothelium mimicking characteristics with structural integrity on stent surfaces.

Enhanced MIN-6 beta cell survival and function on a nitric oxide-releasing peptide amphiphile nanomatrix

Innovative biomaterial strategies are required to improve islet cell retention, viability, and functionality, and thereby obtain clinically successful outcomes from pancreatic islet cell transplantation. To address this need, we have developed a peptide amphiphile-based nanomatrix that incorporates multifunctional bioactive cues and sustained release of nitric oxide. The goal of this study was to evaluate the effect of this peptide amphiphile nanomatrix on the viability and functionality of MIN-6 islet cells. Additionally, this study provides insight into the role of nitric oxide in islet cell biology, given that conventional nitric oxide donors are unable to release nitric oxide in a controlled, sustained manner, leading to ambiguous results. It was hypothesized that controlled nitric oxide release in synergy with multifunctional bioactive cues would promote islet cell viability and functionality. Nitric oxide-releasing peptide amphiphile nanomatrices within the range of 16.25 μmol to 130 μmol were used to analyze MIN-6 cell behavior. Both 32.5 μmol and 65 μmol peptide amphiphiles showed improved MIN-6 functionality in response to glucose over a 7-day time period, and the elevated functionality was correlated with both PDX-1 and insulin gene expression. Our results demonstrate that nitric oxide has a beneficial effect on MIN-6 cells in a concentration-dependent manner.