Adriana P. Vieira

Kinetics and thermodynamics of textile dye adsorption from aqueous solutions using babassu coconut mesocarp

Extracted babassu coconut (Orbignya speciosa) mesocarp (BCM) was applied as a biosorbent for aqueous Blue Remazol R160 (BR 160), Rubi S2G (R S2G), Red Remazol 5R (RR 5), Violet Remazol 5R (VR 5) and Indanthrene Olive Green (IOG) dye solutions. The natural sorbent was processed batchwise while varying several system parameters such as stirring time, pH and temperature. The interactions were assayed with respect to both pseudo-first-order and second-order reaction kinetics, with the latter the more suitable kinetic model. The maximum adsorption was obtained at pH 1.0 for all dyes due to available anionic groups attached to the structures, which can be justified by pH(pzc) 6.7 for the biosorbent BCM. The ability of babassu coconut mesocarp to adsorb dyes gave the order R S2G>VR 5>BR 160>IOG>RR 5, which data were best fit to Freundlich model, but did not well-adjusted for all dyes. The dye/biopolymer interactions at the solid/liquid interface are all spontaneous as given by free Gibbs energy, with exothermic enthalpic values of -26.1, -15.8, -17.8, -15.8 and -23.7 kJ mol(-1) for BR 160, R S2G, RR 5, IOG and VR 5, respectively. In spite of the negative entropic values contribution, the set of thermodynamic data is favorable for all dyes removal. However, the results pointed to the effectiveness of the mesocarp of babassu coconut as a biosorbent for removing textile dyes from aqueous solutions.

Immobilization of ethylenesulfide on babassu coconut epicarp and mesocarp for divalent cation sorption

A new synthetic methodology route consisted in reacting the natural babassu coconut mesocarp (BCM) and babassu coconut epicarp (BCE) with ethylenesufide, for adding basic sulfur centers in pendant chains that possess high potential activity for coordinating divalent cations from aqueous solution. All biomaterials were characterized by elemental analysis, infrared (IR), (13)C NMR and thermogravimetry. The sulfur elemental analysis gave 2.00+/-0.05 and 8.67+/-0.01% for BCES and BCMS, which correspond to 0.60+/-0.01 and 2.71+/-0.01 mmol of this element per each gram of BCE and BCM, to confer a degree of functionalization of 20.2+/-0.07 and 86.7+/-0.01 mg g(-1). This synthesis enabled from IR weak SH band at 2544 cm(-1) due to the incorporation of the reagent into the structure. The basic centers favor copper sorption with increasing pH from 2 to 6 observed by a batchwise methodology and the data obtained from the chosen pH 6 were adjusted to Freundlich and Langmuir models, favoring fit for the latter equation. The kinetics of sorption was established at 30 min for both biopolymers with a pseudo-second-order model.

Epicarp and mesocarp of babassu (Orbignya speciosa): characterization and application in copper phtalocyanine dye removal

The mesocarp and epicarp components of the babassu palm tree were applied as novel alternative biosorbents for copper phtalocyanine textile dye removal from aqueous solutions. The natural biopolymers were characterized by elemental analyses, solid state 13C NMR, infrared spectroscopy, thermogravimetric analysis and X-ray diffractometry. Results demonstrated that the compositions of the mesocarp and epicarp are similar to those of other lignocellulosic materials, and that they were very effective for removal of the textile dye Turquoise Remazol. A pseudo second-order kinetic model resulted in the best fit with experimental data for both epicarp and mesocarp (R2 = 0.999), providing rate constants of sorption, k2, of 0.31 and 1.43 g mg-1 min-1, respectively. The Langmuir and Freundlich isotherm models were employed for adsorption analysis of the experimental data in their linearized forms. The second model resulted in the better fit for Turquoise Remazol dye, which presented maximum adsorption of 1.44 and 2.38 mg g-1 at pH 6.0 for mesocarp and epicarp, respectively.

Removal of the Textile Dye Indanthrene Olive Green from Aqueous Solution Using Chitosan

The kinetics and equilibrium of the adsorption of Indanthrene Olive Green (IOG) from aqueous solution onto chitosan have been investigated. The chitosan was characterised in terms of its average degree of de-acetylation (DD) and by XRD, TGA/DTG, IR, SEM and specific BET surface area methods. Batch adsorptions experiments were carried out at different pH values and dye concentrations. It was found that the adsorption process was favoured by acidic pH conditions (4.0–6.0). The adsorption followed second-order rate kinetics and the experimental equilibrium data followed the Langmuir isotherm, thereby suggesting that chemisorption might be the major adsorption mode. Such adsorption also occurred on chitosan fibres, although to a significantly lower extent than on crushed chitosan. The corresponding thermodynamic parameters (ΔG0, ΔH0 and ΔS0) were calculated. The positive values obtained for ΔH0 (161.7 kJ/mol) and ΔS0 [559.9 J/(mol K)] suggest that the adsorption process was endothermic, with the randomness of the system increasing during the adsorption process. A simplified adsorption model has also been proposed.

Sawdust Derivative for Environmental Application: Chemistry, Functionalization and Removal of textile dye from aqueous solution

The adsorption of Violet Remazol 5R (VR 5) on wood sawdust modified with succinic anhydride (SSA) as a function of contact time, pH, and initial dye concentrations was investigated using a batch technique under ambient conditions. The SSA obtained was confirmed by IR spectroscopy, thermogravimetry and 13C NMR, and degrees of substitution (DS) were calculated. A study on the effect of the pH on the adsorption of VR 5 showed that the optimum pH was 2.0. The interactions were assayed with respect to the pseudo-first-order and pseudo-second-order kinetic models, and were found to follow closely the pseudo-second-order. The isotherm was adjusted to the Langmuir, the Freundlich and the Temkin sorption models. SSA is a promising material for the removal of dye textile from aqueous solutions, and under conditions studied the removal percentage achieved was 51.7%.

``Sweet Chemistry{''}: a Green Way for Obtaining Selenium Nanoparticles Active against Cancer Cells

We present an environment friendly synthesis of selenium nanoparticles and the study of their cytotoxic activity against uterine sarcoma cancer and fibroblasts cells. Amorphous selenium (a-SeNPs) and trigonal selenium (t-SeNPs) were synthesized using D-fructose as the reducing agent and characterized by high-resolution transmission electron microscopy (HRTEM), energydispersive X-ray spectroscopy (EDX), powder X-ray diffraction analysis (XRD), inductively coupled plasma optical emission spectrometry (ICP OES), dynamic light scattering (DLS) to obtain zeta potential values and cyclic voltammetry (CV). Particularly, a-SeNPs presented high toxicity toward the resistant cancer cell line MES-SA/Dx5 and its parental MES-SA line. However, they are not toxic against P4 fibroblast cells in comparative studies.

Kinetics and thermodynamics of indanthrene textile dye adsorption onto chitosan

Abstract The kinetics and equilibrium of Indanthrene Olive Green (IOG) adsorption on chitosan, from aqueous solutions, have been investigated. The chitosan was characterized by XRD, average degree of deacetylation (DD), TGA/DTG, IR, SEM and specific BET surface area. Batch adsorptions experiments were carried out in different pH and dye concentration. An acidic pH condition (4.0 to 6.0) was favorable to the adsorption process. The adsorption followed secondorder rate kinetics and the experimental equilibrium data followed Langmuir isotherm, suggesting that chemisorption might be the major adsorption mode. The adsorptions also occurred on chitosan fibers, being significantly lower than that of crushed chitosan. Thermodynamic parameters ( ΔG°, ΔH°, and S°) were calculated. The positive values of ΔH° (161.7 kJ mol-1) and S° (559.9 J mol-1 K-1) suggest that the adsorption is endothermic and that during this adsorption process the randomness of the system increases. A simplified adsorption model is also proposed.