Adriana Šturcová

Structure of cellulose microfibrils in primary cell walls from collenchyma.

In the primary walls of growing plant cells, the glucose polymer cellulose is assembled into long microfibrils a few nanometers in diameter. The rigidity and orientation of these microfibrils control cell expansion; therefore, cellulose synthesis is a key factor in the growth and morphogenesis of plants. Celery (Apium graveolens) collenchyma is a useful model system for the study of primary wall microfibril structure because its microfibrils are oriented with unusual uniformity, facilitating spectroscopic and diffraction experiments. Using a combination of x-ray and neutron scattering methods with vibrational and nuclear magnetic resonance spectroscopy, we show that celery collenchyma microfibrils were 2.9 to 3.0 nm in mean diameter, with a most probable structure containing 24 chains in cross section, arranged in eight hydrogen-bonded sheets of three chains, with extensive disorder in lateral packing, conformation, and hydrogen bonding. A similar 18-chain structure, and 24-chain structures of different shape, fitted the data less well. Conformational disorder was largely restricted to the surface chains, but disorder in chain packing was not. That is, in position and orientation, the surface chains conformed to the disordered lattice constituting the core of each microfibril. There was evidence that adjacent microfibrils were noncovalently aggregated together over part of their length, suggesting that the need to disrupt these aggregates might be a constraining factor in growth and in the hydrolysis of cellulose for biofuel production.

Structure of cellulose-deficient secondary cell walls from the irx3 mutant of Arabidopsis thaliana

In the Arabidopsis mutant irx3, truncation of the AtCesA7 gene encoding a xylem-specific cellulose synthase results in reduced cellulose synthesis in the affected xylem cells and collapse of mature xylem vessels. Here we describe spectroscopic experiments to determine whether any cellulose, normal or abnormal, remained in the walls of these cells and whether there were consequent effects on other cell-wall polysaccharides. Xylem cell walls from irx3 and its wild-type were prepared by anatomically specific isolation and were examined by solid-state NMR spectroscopy and FTIR microscopy. The affected cell walls of irx3 contained low levels of crystalline cellulose, probably associated with primary cell walls. There was no evidence that crystalline cellulose was replaced by less ordered glucans. From the molecular mobility of xylans and lignin it was deduced that these non-cellulosic polymers were cross-linked together in both irx3 and the wild-type. The disorder previously observed in the spatial pattern of non-cellulosic polymer deposition in the secondary walls of irx3 xylem could not be explained by any alteration in the structure or cross-linking of these polymers and may be attributed directly to the absence of cellulose microfibrils which, in the wild-type, scaffold the organisation of the other polymers into a coherent secondary cell wall.

Cell-wall structure and anisotropy in procuste, a cellulose synthase mutant of Arabidopsis thaliana

In dark-grown hypocotyls of the Arabidopsis procuste mutant, a mutation in the CesA6 gene encoding a cellulose synthase reduces cellulose synthesis and severely inhibits elongation growth. Previous studies had left it uncertain why growth was inhibited, because cellulose synthesis was affected before, not during, the main phase of elongation. We characterised the quantity, structure and orientation of the cellulose remaining in the walls of affected cells. Solid-state NMR spectroscopy and infrared microscopy showed that the residual cellulose did not differ in structure from that of the wild type, but the cellulose content of the prc-1 cell walls was reduced by 28%. The total mass of cell-wall polymers per hypocotyl was reduced in prc-1 by about 20%. Therefore, the fourfold inhibition of elongation growth in prc-1 does not result from aberrant cellulose structure, nor from uniform reduction in the dimensions of the cell-wall network due to reduced cellulose or cell-wall mass. Cellulose orientation was quantified by two quantitative methods. First, the orientation of newly synthesised microfibrils was measured in field-emission scanning electron micrographs of the cytoplasmic face of the inner epidermal cell wall. The ordered transverse orientation of microfibrils at the inner face of the cell wall was severely disrupted in prc-1 hypocotyls, particularly in the early growth phase. Second, cellulose orientation distributions across the whole cell-wall thickness, measured by polarised infrared microscopy, were much broader. Analysis of the microfibril orientations according to the theory of composite materials showed that during the initial growth phase, their anisotropy at the plasma membrane was sufficient to explain the anisotropy of subsequent growth.

Characterizing Crystal Disorder of Trospium Chloride: A Comprehensive,13C CP/MAS NMR, DSC, FTIR, and XRPD Study

Analysis of C cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and X-ray powder diffraction data of trospium chloride (TCl) products crystallized from different mixtures of water-ethanol [φ(EtOH) = 0.5-1.0] at various temperatures (0°C, 20°C) and initial concentrations (saturated solution, 30%-50% excess of solvent) revealed extensive structural variability of TCl. Although (13) C CP/MAS NMR spectra indicated broad variety of structural phases arising from molecular disorder, temperature-modulated DSC identified presence of two distinct components in the products. FTIR spectra revealed alterations in the hydrogen bonding network (ionic hydrogen bond formation), whereas the X-ray diffraction reflected unchanged unit cell parameters. These results were explained by a two-component character of TCl products in which a dominant polymorphic form is accompanied by partly separated nanocrystalline domains of a secondary phase that does not provide clear Bragg reflections. These phases slightly differ in the degree of molecular disorder, in the quality of crystal lattice and hydrogen bonding network. It is also demonstrated that, for the quality control of such complex products, (13) C CP/MAS NMR spectroscopy combined with factor analysis (FA) can satisfactorily be used for categorizing the individual samples: FA of (13) C CP/MAS NMR spectra found clear relationships between the extent of molecular disorder and crystallization conditions.

Role of hydration and water coordination in micellization of Pluronic block copolymers

Raman, attenuated total reflectance FTIR, near-infrared spectroscopy, and DFT calculations have been used in a study of aqueous solutions of three tri-block copolymers poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) or PEO-PPO-PEO with commercial names Pluronic PE6200, PE6400 and F68. It is shown that the process of micellization as a response to increased temperature is reflected in the hydroxyl stretching region of infrared and Raman spectra, which contains information both about restructuring of water and changes of polymer chains in polymer/water aggregates. Raman spectra exhibit differences between individual Pluronics even at temperatures below the critical micellization temperature (CMT). According to the attenuated total reflection (ATR) FTIR spectra, the same five water coordination types defined by the number of donated/accepted hydrogen bonds are present in interacting water as in bulk water. It indicates that models considering mixed states of water with different hydrogen bonding environments provide appropriate descriptions of bound water both below and above the CMT. Above the CMT, aggregate hydration increases in the order PE6400 < PE6200 < F68, although that does not fully correspond to the EO/PO ratio, and points to the differences in microstructure of aggregates formed by each copolymer. This study relates nanoscale phenomena (hydrophobic and hydrophilic hydration) with the mesoscale phenomenon of micellization.

Activation of cellulose by 1,4-dioxane for dissolution in N,N-dimethylacetamide/LiCl

N,N-Dimethylacetamide/lithium chloride (DMAc/LiCl) mixture is a popular solvent system used for cellulose dissolution, analysis, and derivatization. However, a pre-treatment (activation) procedure is needed for most celluloses to dissolve readily in DMAc/LiCl. Here, an optimized version of the activation protocol based on solvent exchange to 1,4-dioxane was introduced. Its universality was demonstrated by successful activation and dissolution of six different celluloses (AVICEL, Sigmacell, cotton linters, Encell, Lincell, and Whatman paper). Dissolution times varied significantly for different cellulose types and also depended on factors such as the drying method employed or the water removal step inclusion/omission. Dioxane-activated celluloses were analyzed with a variety of methods. SEC measurements indicated low destructivity of the dioxane activation method. The infrared spectroscopy analysis showed that dioxane remained adsorbed on cellulose even after rigorous drying. In addition, upon dioxane activation, stagnation or a slight increase in the total order index of celluloses was observed. This observation was in accordance with the crystallinity index changes determined by solid-state NMR. Finally, scanning electron microscopy revealed disintegration of AVICEL particles and defibrillation of fibrous celluloses upon dioxane activation; Sigmacell remained apparently unchanged.

Structural insight into the physical stability of amorphous Simvastatin dispersed in pHPMA: Enhanced dynamics and local clustering as evidenced by solid-state NMR and Raman spectroscopy

New drug formulations are sought for poorly water-soluble substances because there is a risk of compromised bioavailability if such substances are administered orally. Such active pharmaceutical ingredients can be reformulated as solid dispersions with suitable water-soluble polymers. In this contribution, formulation of a novel and physically stable dispersion of Simvastatin in poly(2-hydroxypropyl) methacrylamide (pHPMA) is demonstrated. Due to the limited water sorption of pHPMA and a high Tg, the prepared dispersion is more suited for oral administration and storage compared with neat amorphous Simvastatin. Surprisingly, the rate of global reorientation and the internal motion of Simvastatin molecules were enhanced and exhibited dynamical heterogeneities when incorporated into the pHPMA matrix. As revealed by solid-state nuclear magnetic resonance combined with Raman spectroscopy exploiting the fluorescence phenomenon the mobility of the ester and lactone components increased considerably, whereas the naphthalene ring remained rigid. Furthermore, the solid dispersion was found to be nano-heterogeneous with nanometer-sized Simvastatin domains. The presence of these clusters had no impact on the dynamics of the rigid pHPMA chains. Thus, the diffusion of Simvastatin molecules through the glassy pHPMA walls and the subsequent transformation of the clusters into larger crystallites were prevented. No crystallization was detected for more than two years.