Adrienne Tarres

Comparison of indirect and direct quantification of esters of monochloropropanediol in vegetable oil

The presence of fatty acid esters of monochloropropanediol (MEs) in food is a recent concern raised due to the carcinogenicity of their hydrolysable moieties 2- and 3-monochloropropanediol (2- and 3-MCPD). Several indirect methods for the quantification of MEs have been developed and are commonly in use until today, however significant discrepancies among analytical results obtained are challenging their reliability. The aim of the present study was therefore to test the trueness of an indirect method by comparing it to a newly developed direct method using palm oil and palm olein as examples. The indirect method was based on ester cleavage under acidic conditions, derivatization of the liberated 2- and 3-MCPD with heptafluorobutyryl imidazole and GC-MS determination. The direct method was comprised of two extraction procedures targeting 2-and 3-MCPD mono esters (co-extracting as well glycidyl esters) by the use of double solid phase extraction (SPE), and 2- and 3-MCPD di-esters by the use of silica gel column, respectively. Detection was carried out by liquid chromatography coupled to time of flight mass spectrometry (LC-ToF-MS). Accurate quantification of the intact compounds was assured by means of matrix matched standard addition on extracts. Analysis of 22 palm oil and 7 palm olein samples (2- plus 3-MCPD contamination ranged from 0.3 to 8.8 μg/g) by both methods revealed no significant bias. Both methods were therefore considered as comparable in terms of results; however the indirect method was shown to require less analytical standards, being less tedious and furthermore applicable to all type of different vegetable oils and hence recommended for routine application.

Determination of Seven Glycidyl Esters in Edible Oils by Gel Permeation Chromatography Extraction and Liquid Chromatography Coupled to Mass Spectrometry Detection

A method based on a gel permeation chromatography (GPC) extraction procedure combined with an additional cleanup by solid-phase extraction (SPE) on silica gel and liquid chromatography-mass spectrometry (LC-MS) detection has been validated for the analysis of seven glycidyl esters (GEs) including glycidyl laurate, myristate, palmitate, stearate, oleate, linoleate, and linolenate in various edible oils. This method was conjointly developed and validated by two different laboratories, using two different detection systems, a LC time of flight MS (LC-ToF-MS) and a LC triple-quadrupole MS (LC-MS/MS). The extraction procedure allowed targeting low contamination levels due to a highly efficient matrix removal from the 400 mg oil sample loaded on the GPC column and is suitable for routine analysis as 24 samples can be extracted in an automated and reproducible way every 12 h. GPC extraction combined with SPE cleanup and LC-MS/MS detection leads to a limit of quantification in oil samples between 50 and 100 μg/kg depending on the type of glycidyl ester. Recoveries ranged from 68 to 111% (average = 93%). Quantification was performed by automated standard addition on extracts to compensate matrix effects artifacts. To control recoveries of each sample four isotopically labeled GEs ((13)C(3) or (13)C(4)) were included in the method.

Quantitative determination of sodium monofluoroacetate “1080” in infant formulas and dairy products by isotope dilution LC-MS/MS

A fast and easy-to-use confirmatory liquid-chromatography tandem mass-spectrometry (LC-MS/MS) based-method was developed for the analysis of the pesticide sodium monofluoroacetate (MFA, also called “1080”) in infant formulas and related dairy products. Extraction of the compound encompassed sample reconstitution and liquid–liquid extraction under acidic conditions. Time-consuming solid-phase extraction steps for clean-up and enrichment and tedious derivatisation were thus avoided. Resulting sample extracts were analysed by electrospray ionisation (ESI) in negative mode. Quantification was performed by the isotopic dilution approach using 13C-labelled MFA as internal standard. The procedure was validated according to the European document SANCO/12571/2013 and performance parameters such as linearity (r2 > 0.99), precision (RSD(r) ≤ 9%, RSD(iR) ≤ 11%) and recovery (96–117%) fulfilled its requirements. Limit of quantifications (LOQ) was 1 µg kg−1 for infant formulas and related dairy products except for whey proteins powders with a LOQ of 5 µg kg−1. Method ruggedness was further assessed in another laboratory devoted to routine testing for quality control.

Mepiquat: A Process-Induced Byproduct in Roasted Cereal-Based Foodstuffs

Mepiquat, a growth regulator widely used in agriculture, is also known as a process-induced byproduct formed in coffee from natural constituents during heat treatments such as roasting. This study examines mepiquat formation in cereal-based foodstuffs treated at sufficiently high temperature to trigger methyl transfer reactions that involve glycine betaine and choline naturally present in cereals. Color measurements of roasted barley grains revealed a correlation between thermal treatment and mepiquat content. Trials at industrial scale on instant beverages composed of roasted cereals demonstrated significant increases in mepiquat during the thermal process (in the range of 140-205 μg/kg in final products). A targeted survey of commercial products showed mepiquat in the range 69-381 μg/kg in powdered cereal instant drinks and 42-168 μg/kg in mugicha tea, a roasted barley infusion. These findings will not significantly affect the exposure of consumers to mepiquat due to the low amounts detected.

Role of choline and glycine betaine in the formation of N,N-dimethylpiperidinium (mepiquat) under Maillard reaction conditions.

This study is the first to examine the role of choline and glycine betaine, naturally present in some foods, in particular in cereal grains, to generate N,N-dimethylpiperidinium (mepiquat) under Maillard conditions via transmethylation reactions involving the nucleophile piperidine. The formation of mepiquat and its intermediates piperidine – formed by cyclisation of free lysine in the presence of reducing sugars – and N-methylpiperidine were monitored over time (240°C, up to 180 min) using high-resolution mass spectrometry in a model system comprised of a ternary mixture of lysine/fructose/alkylating agent (choline or betaine). The reaction yield was compared with data recently determined for trigonelline, a known methylation agent present naturally in coffee beans. The role of choline and glycine betaine in nucleophilic displacement reactions was further supported by experiments carried out with stable isotope-labelled precursors (13C- and deuterium-labelled). The results unequivocally demonstrated that the piperidine ring of mepiquat originates from the carbon chain of lysine, and that either choline or glycine betaine furnishes the N-methyl groups. The kinetics of formation of the corresponding demethylated products of both choline and glycine betaine, N,N-demethyl-2-aminoethanol and N,N-dimethylglycine, respectively, were also determined using high-resolution mass spectrometry.

LC-MS/MS analytical procedure to quantify tris(nonylphenyl)phosphite, as a source of the endocrine disruptors 4-nonylphenols, in food packaging materials

Tris(nonylphenyl)phosphite, an antioxidant used in polyethylene resins for food applications, is problematic since it is a source of the endocrine-disrupting chemicals 4-nonylphenols (4NP) upon migration into packaged foods. As a response to concerns surrounding the presence of 4NP-based compounds in packaging materials, some resin producers and additive suppliers have decided to eliminate TNPP from formulations. This paper describes an analytical procedure to verify the “TNPP-free” statement in multilayer laminates used for bag-in-box packaging. The method involves extraction of TNPP from laminates with organic solvents followed by detection/quantification by LC-MS/MS using the atmospheric pressure chemical ionisation (APCI) mode. A further acidic treatment of the latter extract allows the release of 4NP from potentially extracted TNPP. 4NP is then analysed by LC-MS/MS using electrospray ionisation (ESI) mode. This two-step analytical procedure ensures not only TNPP quantification in laminates, but also allows the flagging of other possible sources of 4NP in such packaging materials, typically as non-intentionally added substances (NIAS). The limits of quantification were 0.50 and 0.48 µg dm–2 for TNPP and 4NP in laminates, respectively, with recoveries ranging between 87% and 114%. Usage of such analytical methodologies in quality control operations has pointed to a lack of traceability at the packaging supplier level and cross-contamination of extrusion equipment at the converter level, when TNPP-containing laminates are processed on the same machine beforehand.

Process-induced formation of imidazoles in selected foods

The presence of 4-methylimidazole (4-MEI), 2-methylimidazole (2-MEI) and 2-acetyl-4-tetrahydroxybutylimidazole (THI) in some foods may result from the usage of caramel colorants E150c and E150d as food additives. This study demonstrates that alkylimidazoles are also byproducts formed from natural constituents in foods during thermal processes. A range of heat-processed foods that are known not to contain caramel colorants were analyzed by isotope dilution LC-MS/MS to determine the contamination levels. Highest 4-MEI concentrations (up to 466µg/kg) were observed in roasted barley, roasted malt and cocoa powders, with the concomitant presence of 2-MEI and/or THI in some cases, albeit at significantly lower levels. Low amounts of 4-MEI (<20µg/kg) were also detected in cereal-based foods such as breakfast cereals and bread toasted to a brown color (medium toasted). The occurrence of 4-MEI in certain processed foods is therefore not a reliable indicator of the presence of the additives E150c or E150d.

Determination of 105 antibiotic, anti-inflammatory, antiparasitic agents and tranquilizers by LC-MS/MS based on an acidic QuEChERS-like extraction

ABSTRACT A procedure for screening 105 veterinary drugs in foods by liquid chromatography tandem mass-spectrometry (LC-MS/MS) is presented. Its scope encompasses raw materials of animal origin (milk, meat, fish, egg and fat) but also related processed ingredients and finished products commonly used and manufactured by food business operators. Due to the complexity of the matrices considered and to efficiently deal with losses during extraction and matrix effects during MS source ionisation, each sample was analysed twice, that is ‘unspiked’ and ‘spiked at the screening target concentration’ using a QuEChERS-like extraction. The entire procedure was validated according to the European Community Reference Laboratories Residues Guidelines. False-negative and false-positive rates were below 5% for all veterinary drugs whatever the food matrix. Effectiveness of the procedure was further demonstrated through participation to five proficiency tests and its ruggedness demonstrated in quality control operations by a second laboratory.

Heat-induced formation of mepiquat by decarboxylation of pipecolic acid and its betaine derivative. Part 1: Model system studies

This study describes, for the first time, the role of pipecolic acid betaine and pipecolic acid, naturally present in some foods, in the formation of the plant growth regulator N,N-dimethylpiperidinium (mepiquat) under dry thermal conditions. The formation of mepiquat and intermediate compounds was investigated in model systems using high performance liquid chromatography-quadrupole/time-of-flight mass spectrometry. Mepiquat is released with a yield of up to 0.66mol% after thermal treatment (>150°C) of pipecolic acid betaine. Similar conversion rates are attained with the congener piperidine-2-carboxylic acid (dl-pipecolic acid), albeit in the presence of alkylating agents, such as choline, glycine betaine or trigonelline, that are fairly widespread in food crops. These new pathways to mepiquat indicate that the occurrence of low levels of this thermally induced compound is probably more widespread in processed foods than initially suspected (see Part 2 of this study on the occurrence of mepiquat in selected foodstuffs).

Determination of 14 aminoglycosides by LC-MS/MS using molecularly imprinted polymer solid phase extraction for clean-up

ABSTRACT An LC-MS/MS method for screening 14 aminoglycosides in foodstuffs of animal origin is presented. Its scope includes raw materials and processed ingredients but also finished products composed of milk, meat, fish, egg or fat. Aminoglycosides are extracted in an acidic aqueous solution, which is first recovered after centrifugation, then diluted with a basic buffer and finally purified by molecularly imprinted polymer-solid phase extraction (MIP-SPE). Analytes are detected within 8 min by ion-pair reversed phase LC-MS/MS. Due to the large range of foodstuffs involved, the variability of matrix effects led to significant MS signal variations. This was circumvented by systematically extracting each sample twice, i.e. ‘unspiked’ and ‘spiked’ at the screening target concentration of 50 µg kg−1. The method was validated according to the European Community Reference Laboratories Residues Guidelines giving false-negative and false-positive rates ≤3% for all compounds. Ruggedness of the method was further demonstrated in quality control operations by a second laboratory. The 14 aminoglycosides in water-based standard solutions were stable for up to 6 months when stored at either −80°C, −20°C or at 4°C storage temperatures.