Ahmed ElMekawy

Internal resistance of microfluidic microbial fuel cell: challenges and potential opportunities.

The efficiency of microbial fuel cells (MFCs) is affected by several factors such as activation overpotentials, ohmic losses and concentration polarization. These factors are handled in micro-sized MFCs using special electrodes with physically or chemically modified surfaces constructed with specified materials. Most of the existing μLscale MFCs show great potential in rapid screening of electrochemically-active microbes and electrode performance; although they generate significantly lower volumetric power density compared with their mL counterparts because of their high internal resistance. This review presents the development of microfluidic MFCs, with summarization of their advantages and challenges, and focuses on the efforts done to minimize the adverse effects of internal resistance (ohmic and non-ohmic) on their performance.

Valorization of Cereal Based Biorefinery Byproducts:Reality and Expectations

The growth of the biobased economy will lead to an increase in new biorefinery activities. All biorefineries face the regular challenges of efficiently and economically treating their effluent to be compatible with local discharge requirements and to minimize net water consumption. The amount of wastes resulting from biorefineries industry is exponentially growing. The valorization of such wastes has drawn considerable attention with respect to resources with an observable economic and environmental concern. This has been a promising field which shows great prospective toward byproduct usage and increasing value obtained from the biorefinery. However, full-scale realization of biorefinery wastes valorization is not straightforward because several microbiological, technological and economic challenges need to be resolved. In this review we considered valorization options for cereals based biorefineries wastes while identifying their challenges and exploring the opportunities for future process.

The near-future integration of microbial desalination cells with reverse osmosis technology

The combined negative effect of both fresh water shortage and energy depletion has encouraged the research to move forward to explore effective solutions for water desalination with less energy consumption. Reverse osmosis (RO), the most common technology for desalination today, uses much less energy than thermal processes. Several modifications and improvements have been made to RO during the last four decades in order to minimize energy consumption, and the process is now near thermodynamic limits. To further reduce energy requirements for desalination, other approaches are needed. A microbial desalination cell (MDC) is a recent technology that could be used as an alternative to RO. An MDC uses electrical current, produced by electrochemically active bacteria, to concurrently generate bioenergy, treat wastewater, and desalinate water. In an attempt to answer the question of whether this emerging technology has the ability to stand alone as an efficient replacement for RO, or it is best if used as an RO pre-treatment setup, this review addresses the recent approaches and limitations of both MDC and RO technologies in order to highlight the near-future application of MDC integration with RO operation.

Technological advances in CO2 conversion electro-biorefinery: A step toward commercialization.

The global atmospheric warming due to increased emissions of carbon dioxide (CO2) has attracted great attention in the last two decades. Although different CO2 capture and storage platforms have been proposed, the utilization of captured CO2 from industrial plants is progressively prevalent strategy due to concerns about the safety of terrestrial and aquatic CO2 storage. Two utilization forms were proposed, direct utilization of CO2 and conversion of CO2 to chemicals and energy products. The latter strategy includes the bioelectrochemical techniques in which electricity can be used as an energy source for the microbial catalytic production of fuels and other organic products from CO2. This approach is a potential technique in which CO2 emissions are not only reduced, but it also produce more value-added products. This review article highlights the different methodologies for the bioelectrochemical utilization of CO2, with distinctive focus on the potential opportunities for the commercialization of these techniques.

Review of microfluidic microbioreactor technology for high-throughput submerged microbiological cultivation

Microbial fermentation process development is pursuing a high production yield. This requires a high throughput screening and optimization of the microbial strains, which is nowadays commonly achieved by applying slow and labor-intensive submerged cultivation in shake flasks or microtiter plates. These methods are also limited towards end-point measurements, low analytical data output, and control over the fermentation process. These drawbacks could be overcome by means of scaled-down microfluidic microbioreactors (μBR) that allow for online control over cultivation data and automation, hence reducing cost and time. This review goes beyond previous work not only by providing a detailed update on the current μBR fabrication techniques but also the operation and control of μBRs is compared to large scale fermentation reactors.

Fine-Tuning the Surface of Forward Osmosis Membranes via Grafting Graphene Oxide: Performance Patterns and Biofouling Propensity

Graphene oxide (GO) nanosheets were attached to the polyamide selective layer of thin film composite (TFC) forward osmosis (FO) membranes through a poly L-Lysine (PLL) intermediary using either layer-by-layer or hybrid (H) grafting strategies. Fourier transform infrared spectroscopy, zeta potential, and thermogravimetric analysis confirmed the successful attachment of GO/PLL, the surface modification enhancing both the hydrophilicity and smoothness of the membranes surface demonstrated by water contact angle, atomic force microscopy, and transmission electron microscopy. The biofouling resistance of the FO membranes determined using an adenosine triphosphate bioluminescence test showed a 99% reduction in surviving bacteria for GO/PLL-H modified membranes compared to pristine membrane. This antibiofouling property of the GO/PLL-H modified membrane was reflected in reduced flux decline compared to all other samples when filtering brackish water under biofouling conditions. Further, the high density and tightly bound GO nanosheets using the hybrid modification reduced the reverse solute flux compared to the pristine, which reflects improved membrane selectivity. These results illustrate that the GO/PLL-H modification is a valuable addition to improve the performance of FO TFC membranes.

Single-Step Assembly of Multifunctional Poly(tannic acid)–Graphene Oxide Coating To Reduce Biofouling of Forward Osmosis Membranes

Graphene oxide (GO) nanosheets have antibacterial properties that have been exploited as a biocidal agent used on desalination membrane surfaces in recent research. Nonetheless, improved strategies for efficient and stable attachment of GO nanosheets onto the membrane surface are still required for this idea to be commercially viable. To address this challenge, we adopted a novel, single-step surface modification approach using tannic acid cross-linked with polyethylene imine as a versatile platform to immobilize GO nanosheets to the surface of polyamide thin film composite forward osmosis (FO) membranes. An experimental design based on Taguchis statistical method was applied to optimize the FO processing conditions in terms of water and reverse solute fluxes. Modified membranes were analyzed using water contact angle, adenosine triphosphate bioluminescence, total organic carbon, Fourier transform infrared spectroscopy, ζ potential, X-ray photoelectron spectroscopy, transmission electron microscopy, and atomic force microscopy. These results show that membranes were modified with a nanoscale (<10 nm), smooth, hydrophilic coating that, compared to pristine membranes, improved filtration and significantly mitigated biofouling by 33% due to its extraordinary, synergistic antibacterial properties (99.9%).

Bio-analytical Applications of Microbial Fuel Cell Based-biosensors for Onsite Water Quality Monitoring

Globally, sustainable provision of high‐quality safe water is a major challenge of the 21st century. Various chemical and biological monitoring analytics are presently utilized to guarantee the availability of high‐quality water. However, these techniques still face some challenges including high costs, complex design and onsite and online limitations. The recent technology of using microbial fuel cell (MFC)‐based biosensors holds outstanding potential for the rapid and real‐time monitoring of water source quality. MFCs have the advantages of simplicity in design and efficiency for onsite sensing. Even though some sensing applications of MFCs were previously studied, e.g. biochemical oxygen demand sensor, recently numerous research groups around the world have presented new practical applications of this technique, which combine multidisciplinary scientific knowledge in materials science, microbiology and electrochemistry fields. This review presents the most updated research on the utilization of MFCs as potential biosensors for monitoring water quality and considers the range of potentially toxic analytes that have so far been detected using this methodology. The advantages of MFCs over established technology are also considered as well as future work required to establish their routine use.

Potential biodegradation of crude petroleum oil by newly isolated halotolerant microbial strains from polluted Red Sea area.

Two microbial isolates from oil polluted Red Sea water in Egypt, designated as RS-Y1 and RS-F3, were found capable of degrading Belayim mix (BX) crude oil. Strains RS-Y1 and RS-F3 were assigned to the genera Lipomyces tetrasporus and Paecilomyces variotii based on their morphological and physiological characteristics. Both isolates were compared for the biodegradation of crude petroleum-oil hydrocarbons in basal salt medium supplemented with 5% (w/v) of BX-crude oil. Gas chromatography profile showed that the biodegradation of total petroleum hydrocarbons (TPHs) inoculated with L. tetrasporus (68.3%) and P. variotii (58.15%) along with their consortium (66%) significantly reduced TPHs levels as compared to the control after 30days. L. tetrasporus (44.5%) was more effective than P. variotii strain (32.89%) in reducing the unresolved complex mixtures (UCM) content from the medium. Both isolates exhibited a strong growth over a wide range of salinity (5-45g/L NaCl).

Kinetic Properties and Role of Bacterial Chitin Deacetylase in the Bioconversion of Chitin to Chitosan

Chitin is an extremely insoluble material with very limited industrial use; however it can be deacetylated to soluble chitosan which has a wide range of applications. The enzymatic deacetylation of various chitin samples was investigated using the bacterial chitin deacetylase (CDA), which was partially purified from Alcaligenes sp. ATCC 55938 growth medium and the kinetic parameters of the enzyme were determined. Also, the efficiency of biocatalyst recycling by immobilization technique was examined. CDA activity reached its maximum (0.419 U/ml) after 18 h of bacterial cultivation. When glycol chitin was used as a substrate, the optimum pH of the enzyme was estimated to be 6 after checking a pH range between 3 and 9, while the optimum temperature was found to be 35°C. Addition of acetate (100 mM) in the assay mixture resulted in 50% loss of enzyme activity. The Km value of the enzyme is 1.6 × 10(-4) µM and Vmax is 24.7 µM/min. The average activity of CDA was 0.38 U/ml for both of immobilized and freely suspended cells after 18 h of bacterial growth. Some related patents are also discussed here.