Aimin Ge

Interfacial structure of soft matter probed by SFG spectroscopy.

Sum frequency generation (SFG) vibrational spectroscopy, an interface-specific technique in contrast to, for example, attenuated total reflectance spectroscopy, which is only interface sensitive, has been employed to investigate the surface and interface structure of soft matter on a molecular scale. The experimental arrangement required to carry out SFG spectroscopy, with particular reference to soft matter, and the analytical methods developed to interpret the spectra are described. The elucidation of the interfacial structure of soft matter systems is an essential prerequisite in order to understand and eventually control the surface properties of these important functional materials.

Enzyme-catalyzed hydrolysis of the supported phospholipid bilayers studied by atomic force microscopy.

Atomic force microscopy (AFM) is employed to reveal the morphological changes of the supported phospholipid bilayers hydrolyzed by a phospholipase A(2) (PLA(2)) enzyme in a buffer solution at room temperature. Based on the high catalytic selectivity of PLA(2) toward l-enantiomer phospholipids, five kinds of supported bilayers made of l- and D-dipalmitoylphosphatidylcholines (DPPC), including l-DPPC (upper leaflet adjacent to solution)/l-DPPC (bottom leaflet) (or l/l in short), l/d, d/l, d/d, and racemic ld/ld, were prepared on a mica surface in gel-phase, to explicate the kinetics and mechanism of the enzyme-induced hydrolysis reaction in detail. AFM observations for the l/l bilayer show that the hydrolysis rate for l-DPPC is significantly increased by PLA(2) and most of the hydrolysis products desorb from substrate surface in 40 min. As d-enantiomers are included in the bilayer, the hydrolysis rate is largely decreased in comparison with the l/l bilayer. The time used to hydrolyze the as-prepared bilayers by PLA(2) increases in the sequence of l/l, l/d, ld/ld, and d/l (d/d is inert to the enzyme action). d-enantiomers in the enantiomer hybrid bilayers remain on the mica surface at the end of the hydrolysis reaction. It was confirmed that the hydrolysis reaction catalyzed by PLA(2) preferentially occurs at the edges of pits or defects on the bilayer surface. The bilayer structures are preserved during the hydrolysis process. Based on these observations, a novel kinetics model is proposed to quantitatively account for the PLA(2)-catalyzed hydrolysis of the supported phospholipid bilayers. The model simulation demonstrates that PLA(2) mainly binds with lipids at the perimeter of defects in the upper leaflet and leads to a hydrolysis reaction, yielding species soluble to the solution phase. The lipid molecules underneath subsequently flip up to the upper leaflet to maintain the hydrophilicity of the bilayer structure. Our analysis shows that d-enantiomers in the hybrid bilayers considerably reduce the hydrolysis rate by its ineffective binding with PLA(2).

Structure and Lateral Interaction in Mixed Monolayers of Dioctadecyldimethylammonium Chloride (DOAC) and Stearyl Alcohol

π-A isotherms, atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy are employed to investigate the molecular structure and lateral interactions in mixed monolayers of dioctadecyldimethylammonium chloride (DOAC) and stearyl alcohol (SA) at air/water and air/solid interfaces. To avoid possible interference between the two molecules in the SFG spectroscopic measurements, perprotonated DOAC and perdeuterated SA (dSA) were used. The thermodynamic analyses for the π-A isotherms show that DOAC is miscible with dSA. SFG observations reveal that DOAC molecules become conformationally ordered as dSA molecules are introduced into the monolayer. AFM observations demonstrate coexistence of DOAC-rich and dSA-rich domains in the mixed monolayer with ratios different from their initial composition in the subphase. The present study suggests that DOAC molecules in the mixed monolayer are condensed by mixing with dSA in which the repulsive interactions between positively charged head groups of the DOAC molecules are largely reduced along with an increase of van der Waals interactions with dSA.

Effect of functional group on the monolayer structures of biodegradable quaternary ammonium surfactants.

The monolayer structures and conformational ordering of cationic surfactants including the biodegradable quaternary ammonium molecules have been systematically characterized by π-A isotherm, surface potential, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and sum frequency generation (SFG) vibrational spectroscopy. It was found that the monolayer of the typical dialkyl dimethylammonium on the water surface was less densely packed along with many conformational gauche defects. The packing density and ordering of these monolayers were improved as halide ions were added to the subphase. A similar condensation effect was also observed when amide or ester groups are present in the alkyl tails of the surfactant. These results are discussed on the basis of the repulsive electrostatic interactions between the terminal ammonium moieties, the hydrogen bonding between the functional groups in the alkyl chains, as well as the flexibility of the alkyl chains in these surfactants. The present study is crucial to understanding the relationship between the interfacial structures and the functionalities of the biodegradable quaternary ammonium surfactants.

Oxidative Degradation of the Monolayer of 1-Palmitoyl-2-Oleoyl-sn-Glycero-3-Phosphocholine (POPC) in Low-Level Ozone.

Ambient ozone is a common pollutant in the atmosphere that has an extremely high oxidative ability, can dramatically change the structure and functionality of biomolecules, and is harmful to public health. However, the knowledge about the influence of low-level ozone is still very limited at a molecular level. In the present study, the monolayer of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC, 16:0-18:1 PC) as well as its binary mixed monolayer with 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC, 16:0 PC), which are widely found in many biological systems, have been systematically investigated in a low-level ozone environment (20 ± 10 ppb), by π-A isotherm, sum frequency generation (SFG) vibrational spectroscopy, and atomic force microscopy (AFM). Our results demonstrate that the POPC monolayer is unstable and the C═C moieties in the oleyl chain are selectively oxidized by the low-level ozone. The oxidized lipids from POPC initially remain and reorientate the hydrophilic portion to the water surface and gradually dissolve into the aqueous solution. One should take great caution when using unsaturated lipid molecules to avoid their possible oxidation in the ambient environment. The present study expands and deepens our insights into the oxidation mechanism of unsaturated lipids at a molecular level.

Salt Effects on Surface Structures of Polyelectrolyte Multilayers (PEMs) Investigated by Vibrational Sum Frequency Generation (SFG) Spectroscopy

Sum frequency generation (SFG) vibrational spectroscopy was employed to investigate the surface structures of polyelectrolyte multilayers (PEMs) constructed by sequentially alternating adsorption of poly(diallyldimethylammonium chloride) (PDDA) and poly(styrenesulfonate) (PSS). It was found that the surface structures and surface charge density of the as-deposited PEMs of PDDA/PSS significantly depend on the concentration of sodium chloride (NaCl) present in the polyelectrolyte solutions. Furthermore, it was found that the surface structure of the as-deposited PEMs is in a metastable state and will reach the equilibrium state by diffusion of the polyelectrolyte chain after an aging process, resulting in a polyelectrolyte mixture on the PEM surfaces.

Structural Reorganization and Fibrinogen Adsorption Behaviors on the Polyrotaxane Surfaces Investigated by Sum Frequency Generation Spectroscopy.

Polyrotaxanes, such as supramolecular assemblies with methylated α-cyclodextrins (α-CDs) as host molecules noncovalently threaded on the linear polymer backbone, are promising materials for biomedical applications because they allow adsorbed proteins possessing a high surface flexibility as well as control of the cellular morphology and adhesion. To provide a general design principle for biomedical materials, we examined the surface reorganization behaviors and adsorption conformations of fibrinogen on the polyrotaxane surfaces with comparison to several random copolymers by sum frequency generation (SFG) vibrational spectroscopy. We showed that the polyrotaxane (OMe-PRX-PMB) with methylated α-CDs as the host molecule exhibited unique surface structures in an aqueous environment. The hydrophobic interaction between the methoxy groups of the methylated α-CD molecules and methyl groups of the n-butyl methacrylate (BMA) side chains may dominate the surface restructuring behavior of the OMe-PRX-PMB. The orientation analysis revealed that the orientation of the fibrinogen adsorbed on the OMe-PRX-PMB surface is close to a single distribution, which is different from the adsorption behaviors of fibrinogen on other polyrotaxane or random copolymer surfaces.

Surface-Restructuring Differences between Polyrotaxanes and Random Copolymers in Aqueous Environment

In the present study, we investigated the surface reorganization behaviors and adsorption conformations of fibrinogen on the surface of polyrotaxanes containing different amounts of α-cyclodextrin (α-CD) by using surface-sensitive vibrational spectroscopy sum frequency generation (SFG). For comparison, behaviors of the surface restructuring and fibrinogen adsorption on the random copolymers containing similar terminal groups were also investigated. It was found that larger amounts of BMA moieties of polyrotaxanes form ordered surface structures after immersion in water for 48 h. Furthermore, the polyrotaxane surfaces exhibit a much higher capability of fibrinogen adsorption than the random copolymer surfaces. The water-induced surface restructuring of the polyrotaxane films slightly affects the adsorption structure of the fibrinogen molecules.