Akiko Hattori

Design considerations for ultraviolet-nanoimprint lithography resists

Abstract. Design considerations for ultraviolet-nanoimprint lithography resists were investigated focusing on the major issues of ink-jetting performance, pattern formability, release property, and dry etching resistance. Regarding ink-jetting performance, small droplet ink-jetting of 0.7 pl was successfully demonstrated by adjusting the resist fluid property to the ink-jet coater and controlling the resist volatilization. Regarding pattern formability, a resist pattern was imprinted from a mold pattern of 28 nm in width and 60 nm in depth without pattern dimension change. It was thought that modulus control of the resist was more important than resist shrinkage in achieving excellent pattern formability. As for release property, resist with fluorine monomer and with nonreactive fluorine antisticking agent were compared. The results indicated that resist design has the capability to both reduce separation force and maintain a clear mold surface. The mold release agent decomposed with an increasing number of imprint shots, but the low release-force resist with nonreactive antisticking agent was able to control degradation of the mold release agent and thus improve release property endurance. Regarding etching resistance, it was found that increasing the ring parameter of resist is essential for high etching resistance, and resulted in improved etched pattern features of the substrate.

Design considerations for UV-NIL resists

Design considerations for UV-NIL resists were investigated focusing on the major issues of ink-jetting performance, pattern formability, release property, and dry etching resistance. Regarding ink-jetting performance, small droplet inkjetting of 0.7pl was successfully demonstrated by adjusting the resist fluid property to the ink-jet coater and controlling the resist volatilization. Regarding pattern formability, a resist pattern was imprinted from a mold pattern of 28nm in width and 60nm in depth without pattern dimension change. It was thought that modulus control of the resist was more important than resist shrinkage in achieving excellent pattern formability. As for release property, resist with fluorine monomer and with non-reactive fluorine anti-sticking agent were compared. The results indicated that resist design has the capability to both reduce separation force and maintain a clear mold surface. The mold release agent decomposed with increasing number of imprint shots, but the low release force resist with non-reactive anti-sticking agent was able to control degradation of the mold release agent and thus improve release property endurance. Regarding etching resistance, it was found that increasing the ring parameter of resist is essential for high etching resistance, and resulted in improved etched pattern features of the substrate.