Akio Miyazato

Polyhedral Oligomeric Silsesquioxanes with Controlled Structure: Formation and Application in New Si-Based Polymer Systems

Features of the formation of cage oligomeric silsesquioxanes, including several new compounds, are described and possible reaction mechanism is proposed. Synthesis of phenyl oligomeric silsesquioxanes selectively functionalized at the 4-position is reported. Formation and utilization of incompletely condensed oligomeric silsesquioxanes are also described.

Octa, deca, and dodeca(4-nitrophenyl) cage silsesquioxanes via 4-trimethylsilylphenyl derivatives

Pure octa, deca, and dodeca(4-nitrophenyl) cage silsesquioxanes were obtained by regio-selective 4-nitration of octa, deca, and dodeca(4-trimethylsilylphenyl) cage silsesquioxanes via ipso-substitution of trimethylsilyl-phenyl bonds by fuming nitric acid. 3-Nitration of octa(4-methylphenyl)octasilesquioxane was also described. The starting octa(4-methyl-, 4-isopropyl- and 4-trimethylsilylphenyl)octasilsesquioxanes were selectively formed in 9-21% isolated yield in the presence of hydrochloric acid. Mixtures of octa, deca and dodecasilsesquioxanes, with decasilsesquioxane as the main component, were formed in the presence of tetrabutylammmonium fluoride as a catalyst. All the cage compounds could be separated mainly by crystallization.

Simultaneous detection of phosphatidylcholines and glycerolipids using matrix-enhanced surface-assisted laser desorption/ionization-mass spectrometry with sputter-deposited platinum film

Matrix-assisted laser desorption/ionisation (MALDI) imaging mass spectrometry (IMS) allows for the simultaneous detection and imaging of several molecules in brain tissue. However, the detection of glycerolipids such as diacylglycerol (DAG) and triacylglycerol (TAG) in brain tissues is hindered in MALDI-IMS because of the ion suppression effect from excessive ion yields of phosphatidylcholine (PC). In this study, we describe an approach that employs a homogeneously deposited metal nanoparticle layer (or film) for the detection of glycerolipids in rat brain tissue sections using IMS. Surface-assisted laser desorption/ionisation IMS with sputter-deposited Pt film (Pt-SALDI-IMS) for lipid analysis was performed as a solvent-free and organic matrix-free method. Pt-SALDI produced a homogenous layer of nanoparticles over the surface of the rat brain tissue section. Highly selective detection of lipids was possible by MALDI-IMS and Pt-SALDI-IMS; MALDI-IMS detected the dominant ion peak of PC in the tissue section, and there were no ion peaks representing glycerolipids such as DAG and TAG. In contrast, Pt-SALDI-IMS allowed the detection of these glycerolipids, but not PC. Therefore, using a hybrid method combining MALDI and Pt-SALDI (i.e., matrix-enhanced [ME]-Pt-SALDI-IMS), we achieved the simultaneous detection of PC, PE and DAG in rat brain tissue sections, and the sensitivity for the detection of these molecules was better than that of MALDI-IMS or Pt-SALDI alone. The present simple ME-Pt-SALDI approach for the simultaneous detection of PC and DAG using two matrices (sputter-deposited Pt film and DHB matrix) would be useful in imaging analyses of biological tissue sections.

Direct Imaging Mass Spectrometry of Plant Leaves Using Surface-assisted Laser Desorption/Ionization with Sputter-deposited Platinum Film.

Plant leaves administered with systemic insecticides as agricultural chemicals were analyzed using imaging mass spectrometry (IMS). Matrix-assisted laser desorption/ionization (MALDI) is inadequate for the detection of insecticides on leaves because of the charge-up effect that occurs on the non-conductive surface of the leaves. In this study, surface-assisted laser desorption/ionization with a sputter-deposited platinum film (Pt-SALDI) was used for direct analysis of chemicals in plant leaves. Sputter-deposited platinum (Pt) films were prepared on leaves administered with the insecticides. A sputter-deposited Pt film with porous structure was used as the matrix for Pt-SALDI. Acephate and acetamiprid contained in the insecticides on the leaves could be detected using Pt-SALDI-MS, but these chemical components could not be adequately detected using MALDI-MS because of the charge-up effect. Enhancement of ion yields for the insecticides was achieved using Pt-SALDI, accompanied by prevention of the charge-up effect by the conductive Pt film. The movement of systemic insecticides in plants could be observed clearly using Pt-SALDI-IMS. The distribution and movement of components of systemic insecticides on leaves could be analyzed directly using Pt-SALDI-IMS. Additionally, changes in the properties of the chemicals with time, as an indicator of the permeability of the insecticides, could be evaluated.

Properties of bio-oil generated by a pyrolysis of forest cedar residuals with the movable Auger-type reactor

Our research project has developed the new movable reactor for bio-oil production in 2013 on the basis of Auger-type system. This package would be a great impact due to the concept of local production for local consumption in the hilly and mountainous area in not only Japan but also in the world. Herein, we would like to report the properties of the bio-oil generated by the developing Auger-type movable reactor. The synthesized bio-oil possessed C: 46.2 wt%, H: 6.5 wt%, N: wt%, S: <0.1 wt%, O: 46.8 wt% and H2O: 18.4 wt%, and served a good calorific value of 18.1 MJ/kg. The spectroscopic and mass analyses such as FT-IR, GC-MS, 13C-NMR and FT-ICR MS supported that the bio-oil was composed by the fine mixtures of methoxy phenols and variety of alcohol or carboxylic acid functional groups. Thus, it is suggested that the bio-oil generated by the new movable Auger-type reactor has a significant potential as well as the existing bio-oil reported previously.

Influence of the Metals and Ligands in Dinuclear Complexes on Phosphopeptide Sequencing by Electron Transfer Dissociation Tandem Mass Spectrometry

Phosphorylation is one of the most important protein modifications, and electron-transfer dissociation tandem mass spectrometry (ETD-MS/MS) is a potentially useful method for the sequencing of phosphopeptides, including determination of the phosphorylation site. Notably, ETD-MS/MS typically provides useful information when the precursor contains more than three positive charges. It is not yet used as an analysis method for large-scale phosphopeptide production due to difficulties occurring in the production of acidic phosphopeptides having more than three positive charges. To increase the charge state of phosphopeptides, we used dinuclear metal complexes, which selectively bind to the phosphate group in phosphopeptides with the addition of positive charge(s). Dinuclear copper, zinc, and gallium complexes were tested and it was found that the type of metal present in the complex strongly affected the affinity of the phosphorylated compounds and their ETD fragmentation. The dinuclear copper complex interacted weakly with the phosphate groups and ETD-induced peptide fragmentation was largely suppressed by the presence of Cu2+, which worked as an electron trap. The dinuclear gallium complex was strongly bound to a phosphate group. However, the ligand binding to gallium acted as an electron trap and the presence of dinuclear gallium complex in the precursor for ETD-MS/MS hampered the sequencing of the phosphopeptides, as in the case of dinuclear copper complexes. In contrast, dinuclear zinc complexes efficiently bind to phosphopeptides with an increase in the charge state, facilitating phosphopeptide sequencing by ETD-MS/MS. The fragmentation of the ligand and peptide backbone in the dinuclear zinc-phosphopeptide complex were competitively induced by ETD. These processes are influenced by the ligand structure and so the detailed ETD fragmentation pathways were investigated using density functional theory calculations.

Mechanochemical Decomposition of Crystalline Cellulose in the Presence of Protonated Layered Niobium Molybdate Solid Acid Catalyst

Direct depolymerization of crystalline cellulose into water-soluble sugars by solvent-free ball milling was examined in the presence of a strongly acidic layered metal oxide, HNbMoO6 , resulting in full conversion with 72 % yield of water-soluble sugars. Measurements by 13 C cross-polarization magic angle spinning NMR spectroscopy and X-ray diffraction revealed that amorphization of cellulose occurred rapidly within 10 min. Scanning electron microscopy equipped with an energy dispersive X-ray indicated that the substrate and the catalyst were well mixed during milling. The time course of the product distribution showed that most of the resultant water-soluble sugars were produced not by successive degradation of oligosaccharides but by direct depolymerization of cellulose chains. The products included glucose, mannose, and cello-oligomers, as well as anhydrosugars. Addition of small amounts of polar solvents increased the sugar yield, whereas further addition of water decreased the selectivity to anhydrosugars. Calculations of the mechanical energy required for the ball-milling process showed that 0.02 % was utilized for the chemical transformation under the conditions examined in this study.

Quantification of Fraglide-1, a New Functional Ingredient, in Vinegars

Vinegar is a widely used condiment in the world, and is produced from ethanol by acetic acid fermentation. Different fruits, vegetables, cereals, and wines can be used as ingredients for vinegar production. It is known that vinegar has many nutrient components such as organic acids, polyphenols, and aromatic compounds. Because of these bioactive components, it has many health benefits. China has a long history of producing vinegar and has been using it for health products and as medicine. Chinese aromatic Zhenjiang vinegar (Kozu) is produced from sticky rice. It is famous for its special flavor and health benefits. 5-Hydroxy-4-phenyl-butenolide (Fraglide-1) is a functional compound discovered in Kozu and has anti-fungal and anti-obesity effects. In this study, the Fraglide-1 content of different kinds of vinegars and ingredients, including Kozu samples and ingredients, was investigated. Fraglide-1 analysis was carried out via LC-MS/MS in multiple reaction monitoring mode. It was found that all the Kozu samples, as well as brown rice vinegar (Kurosu) samples, and the Chinese sticky rice husk used for the production of Kozu, contained Fraglide-1. Kozu production requires a 6-month- to 8-year-long aging process for its special flavor and aroma. Because of this long aging process, Fraglide-1 is thought to move from the sticky rice husk to Kozu.