Akira Kurata

Fractional Flow Reserve Computed from Noninvasive CT Angiography Data: Diagnostic Performance of an On-Site Clinician-operated Computational Fluid Dynamics Algorithm

PURPOSE To validate an on-site algorithm for computation of fractional flow reserve (FFR) from coronary computed tomographic (CT) angiography data against invasively measured FFR and to test its diagnostic performance as compared with that of coronary CT angiography. MATERIALS AND METHODS The institutional review board provided a waiver for this retrospective study. From coronary CT angiography data in 106 patients, FFR was computed at a local workstation by using a computational fluid dynamics algorithm. Invasive FFR measurement was performed in 189 vessels (80 of which had an FFR ≤ 0.80); these measurements were regarded as the reference standard. The diagnostic characteristics of coronary CT angiography-derived computational FFR, coronary CT angiography, and quantitative coronary angiography were evaluated against those of invasively measured FFR by using C statistics. Sensitivity and specificity were compared by using a two-sided McNemar test. RESULTS For computational FFR, sensitivity was 87.5% (95% confidence interval [CI]: 78.2%, 93.8%), specificity was 65.1% (95% CI: 55.4%, 74.0%), and accuracy was 74.6% (95% CI: 68.4%, 80.8%), as compared with the finding of lumen stenosis of 50% or greater at coronary CT angiography, for which sensitivity was 81.3% (95% CI: 71.0%, 89.1%), specificity was 37.6% (95% CI: 28.5%, 47.4%), and accuracy was 56.1% (95% CI: 49.0%, 63.2%). C statistics revealed a larger area under the receiver operating characteristic curve (AUC) for computational FFR (AUC, 0.83) than for coronary CT angiography (AUC, 0.64). For vessels with intermediate (25%-69%) stenosis, the sensitivity of computational FFR was 87.3% (95% CI: 76.5%, 94.3%) and the specificity was 59.3% (95% CI: 47.8%, 70.1%). CONCLUSION With use of a reduced-order algorithm, computation of the FFR from coronary CT angiography data can be performed locally, at a regular workstation. The diagnostic accuracy of coronary CT angiography-derived computational FFR for the detection of functionally important coronary artery disease (CAD) was good and was incremental to that of coronary CT angiography within a population with a high prevalence of CAD.

Cardiac imaging using 256-detector row four-dimensional CT: preliminary clinical report

PurposeAlong with the increase of detector rows on the z-axis and a faster gantry rotation speed, the spatial and temporal resolutions of the multislice computed tomography (CT) have been improved for noninvasive coronary artery imaging. We investigated the feasibility of the second specification prototype 256-detector row four-dimensional CT for assessing coronary artery and cardiac function.Materials and methodsThe subjects were five patients with coronary artery disease. Contrast medium (40–60 ml) was intravenously administered at the rate of 3–4 ml/s. The patients whole heart was scanned for 1.5 s to cover at least one cardiac cycle during breathholding without electrocardiographic gating. Parameters used were 0.5 mm slice thickness, 0.5 s/rotation, 120 Kv, and 350 mA, with a half-scan reconstruction algorithm (temporal resolution 250 ms). Twenty-six transaxial datasets were reconstructed at intervals of 50 ms.ResultsThe assessability of the coronary arteries in AHA segments 1, 2, 3, 5, 6, 7, 9, and 11 was visually evaluated, resulting in 29 of 32 (90.9%) segments being assessable. Functional assessment was also performed using animated movies without banding artifacts in all cases.ConclusionsThe 256-detector row four-dimensional CT can assess the coronary artery and cardiac function using data during 1.5 s without banding artifacts.

Sex-Related Differences in Relations of Uric Acid to Left Ventricular Hypertrophy and Remodeling in Japanese Hypertensive Patients

Both hyperuricemia and echocardiographically determined left ventricular (LV) mass have a well-determined association with cardiovascular morbidity and mortality. However, whether or not there is a sex difference in the association of serum uric acid level with LV mass has never been systematically explored. We examined the sex-specific relation of serum uric acid level and echocardiographic indexes of LV structure in never-treated patients with essential hypertension. We enrolled 160 never-treated hypertensive patients (89 men and 71 women) to assess the possible relationship between LV mass and serum uric acid levels. LV measurements were performed according to the recommendations of the American Society of Echocardiography and the Penn Convention. LV mass was indexed by height, body surface area and height raised to the 2.7th power. A positive significant correlation between LV geometry (LV mass, indexed LV mass and relative wall thickness) and serum uric acid level was found in male hypertensive patients but not in female hypertensive patients. Independent determinants of serum uric acid levels in male hypertensive patients were LV mass and serum creatinine levels. In addition, male hypertensive patients with concentric hypertrophy showed the highest serum uric acid levels. In comparison, independent determinants of serum uric acid levels in female hypertensive patients were age and serum creatinine levels. In conclusion, these findings indicate a sex difference in the association of uric acid with LV geometry in Japanese hypertensive patients. In addition, the finding that the highest levels of serum uric acid were observed in our male hypertensive patients with concentric hypertrophy confirmed the previous reports that these patients have the highest risk for cardiovascular morbidity and mortality.

Relative myocardial blood flow by dynamic computed tomographic perfusion imaging predicts hemodynamic significance of coronary stenosis better than absolute blood flow.

ObjectivesQuantitative myocardial perfusion imaging by computed tomography (CT) was recently introduced to calculate myocardial blood flow (MBF). Because absolute MBF thresholds may be affected by technique, methodology, and the microvasculature, we investigated whether a relative measure of MBF improves accuracy to identify hemodynamically significant coronary stenosis. Materials and MethodsIn this prospective study, 42 patients (mean [SD] age, 62.3[8.7] years; 8 women) with suspected or known coronary disease underwent dynamic CT myocardial perfusion imaging using adenosine vasodilation, before invasive angiography (coronary angiography) with fractional flow reserve (FFR). Within each myocardial territory MBF, the MBF relative to remote myocardium (MBFratio) was calculated and compared with coronary angiography and FFR. ResultsOf the 91 vessels interrogated by FFR (median, 0.81; interquartile range, 0.73–0.94), 45 vessels (49%) had an FFR value lower than 0.8 and were considered hemodynamically significant. Hyperemic MBF was lower in ischemic territories: 75.6 ± 22.5 mL per 100 mL/min versus 98.3 ± 23.1 mL per 100 mL/min (P < 0.0001). The MBFratio correlated better with FFR (P = 0.76) than the absolute MBF did (P = 0.52). Receiver operating curve analysis showed better discrimination by MBFratio: area under the curve of 0.85 versus 0.75 (P = 0.02). The MBF of remote myocardium varied between 60.7 and 167.2 mL per 100 mL/min and was lower in patients without heart rate acceleration (P = 0.0035). ConclusionsThe MBFratio seems to better identify hemodynamically significant coronary artery disease than does the absolute MBF determined by dynamic CT perfusion imaging. This may be caused by microvascular status or related to the methodology.

Qualitative and Quantitative Assessment of Adenosine Triphosphate Stress Whole-Heart Dynamic Myocardial Perfusion Imaging Using 256-Slice Computed Tomography

Background The aim of this study was to investigate the correlation of the qualitative transmural extent of hypoperfusion areas (HPA) using stress dynamic whole-heart computed tomography perfusion (CTP) imaging by 256-slice CT with CTP-derived myocardial blood flow (MBF) for the estimation of the severity of coronary artery stenosis. Methods and Results Eleven patients underwent adenosine triphosphate (0.16 mg/kg/min, 5 min) stress dynamic CTP by 256-slice CT (coverage: 8 cm, 0.27 s/rotation), and 9 of the 11 patients underwent coronary angiography (CAG). Stress dynamic CTP (whole–heart datasets over 30 consecutive heart beats in systole without spatial and temporal gaps) was acquired with prospective ECG gating (effective radiation dose: 10.4 mSv). The extent of HPAs was visually graded using a 3-point score (normal, subendocardial, transmural). MBF (ml/100g/min) was measured by deconvolution. Differences in MBF (mean ± standard error) according to HPA and CAG results were evaluated. In 27 regions (3 major coronary territories in 9 patients), 11 coronary stenoses (> 50% reduction in diameter) were observed. In 353 myocardial segments, HPA was significantly related to MBF (P < 0.05; normal 295 ± 94; subendocardial 186 ± 67; and transmural 80 ± 53). Coronary territory analysis revealed a significant relationship between coronary stenosis severity and MBF (P < 0.05; non-significant stenosis [< 50%], 284 ± 97; moderate stenosis [50–70%], 184 ± 74; and severe stenosis [> 70%], 119 ± 69). Conclusion The qualitative transmural extent of HPA using stress whole-heart dynamic CTP imaging by 256-slice CT exhibits a good correlation with quantitative CTP-derived MBF and may aid in assessing the hemodynamic significance of coronary artery disease.

Peri-infarct dysfunction in post-myocardial infarction: assessment of 3-T tagged and late enhancement MRI

ObjectiveTo determine LV function at different distances from myocardial infarction (MI) by using 3-T tagged MRI and late gadolinium enhancement (LGE).MethodsCardiac MR images were acquired from 21 patients with previous MI. The harmonic phase (HARP) method was used to calculate radial and circumferential strain (RS, CS). The two strains were synchronised by subtracting the CS from the RS at the same time, and this was defined as the efficient strain (ES). Peak strain (P-RS, P-CS, P-ES) and time to peak strain (T-RS, T-CS, T-ES) were used as estimates of contractile function. Based on the presence of LGE, myocardium was classified into infarct, border zone, adjacent and remote areas.ResultsP-RS and P-ES were significantly greater for remote than for adjacent and infarct areas. P-CS values were significantly greater for remote and border zone than for infarct areas. T-RS and T-ES were significantly shorter for remote and border zone than for infarct areas. T-CS was significantly shorter for border zone than for infarct areas.ConclusionContractile dysfunction demonstrated by peak strain was correlated with location at different distances from the infarct. In the border zone, contractile deformation was characterised as earlier T-RS, T-CS and T-ES and greater P-CS than in the infarct area.

Coronary CT angiography derived fractional flow reserve: Methodology and evaluation of a point of care algorithm

BACKGROUND Recently several publications described the diagnostic value of coronary CT angiography (coronary CTA) derived fractional flow reserve (CTA-FFR). For a recently introduced on-site CTA-FFR application, detailed methodology and factors potentially affecting performance have not yet been described. OBJECTIVE To provide a methodological background for an on-site CTA-FFR application and evaluate the effect of patient and acquisition characteristics. METHODS The on-site CTA-FFR application utilized a reduced-order hybrid model applying pressure drop models within stenotic regions. In 116 patients and 203 vessels the diagnostic performance of CTA-FFR was investigated using invasive FFR measurements as a reference. The effect of several potentially relevant factors on CTA-FFR was investigated. RESULTS 90 vessels (44%) had a hemodynamically relevant stenosis according to invasive FFR (threshold ≤0.80). The overall vessel-based sensitivity, specificity and accuracy of CTA-FFR were 88% (CI 95%:79-94%), 65% (55-73%) and 75% (69-81%). The specificity was significantly lower in the presence of misalignment artifacts (25%, CI: 6-57%). A non-significant reduction in specificity from 74% (60-85%) to 48% (26-70%) was found for higher coronary artery calcium scores. Left ventricular mass, diabetes mellitus and large vessel size increased the discrepancy between invasive FFR and CTA-FFR values. CONCLUSIONS On-site calculation of CTA-FFR can identify hemodynamically significant CAD with an overall per-vessel accuracy of 75% in comparison to invasive FFR. The diagnostic performance of CTA-FFR is negatively affected by misalignment artifacts. CTA-FFR is potentially affected by left ventricular mass, diabetes mellitus and vessel size.

Quantitative assessment of regional left ventricular wall thickness and thickening using 16 multidetector-row computed tomography : comparison with cine magnetic resonance imaging

PurposeThe purpose of this study was to investigate the feasibility of retrospective electrocardiography-gated multidetector-row computed tomography (MDCT) in the assessment left ventricular (LV) wall thickness and thickening and to test its validity compared to cine magnetic resonance imaging (MRI) as a standard of reference.Materials and methodsWe enrolled 19 patients who underwent both cardiac MDCT and cine MRI. End-diastolic wall thickness (EDWT) and end-systolic wall thickness (ESWT) were measured in 16 myocardial segments. Percent systolic wall thickening (%SWT) was generated from the EDWT and ESWT. Nondiagnostic myocardial segments were excluded. Correlation and agreement between MDCT and cine MRI were analyzed.ResultsSegmental assessability values were 86.2% (262/304) and 92.1% (280/304) for MDCT and cine MRI, respectively. In assessable segments by both modalities (80.9%, 246/304), a significant correlation between MDCT and MRI was found (r = 0.89, 0.85, and 0.61, for EDWT, ESWT, and %SWT, respectively; all P < 0.05). Mean EDWT and ESWT values by MDCT were slightly lower than those by cine MRI (9.8 ± 3.6 vs. 10.0 ± 3.7 mm and 13.8 ± 4.4 vs. 14.1 ± 4.3 mm, respectively; both P < 0.01). Bland-Altman analysis revealed acceptable limits of agreement between MDCT and Cine MRI.ConclusionMDCT is a feasible method to assess regional LV wall thickness and systolic thickening.

Adenosine triphosphate stress dual-source computed tomography to identify myocardial ischemia: comparison with invasive coronary angiography.

PurposeThe purpose of this study was to investigate the utility incremental diagnostic value of combined assessment with coronary CT angiography (CCTA) and myocardial CT perfusion imaging (CTP) using dual-energy technology with an Adenosine Triphosphate (ATP) load technique.Materials and methodsTwenty-one patients underwent ATP-provocation dual-energy CT and CAG. We compared the diagnostic accuracy with CAG, for ischemic region due coronary stenosis by CCTA alone and CCTA combined with CTP (Combined CCTA/CTP).ResultsAll of 21 patients CTP images could be evaluated, however 8 CCTA images could not be evaluated by calcification and motion artifact, so assessability was 61.9% (13/21) for CCTA alone, and 100% for Combined CCTA/CTP. With CAG results as a comparison, the sensitivity, specificity, positive predictive value, and negative predictive value were, respectively, 83.3% (20/24), 74.4% (29/39), 66.7% (20/30), and 87.8% (29/33) for CCTA alone, and 66.7% (16/24), 92.3% (36/39), 84.2% (16/19), and 81.8% (36/44) for combined CCTA/CTP. The diagnostic accuracy of the two methods were 77.8% (49/63) and 82.5% (52/63).ConclusionDual-energy CT may be a useful modality for perfusion assessment and correlated well with the severity of stenosis on CAG. This technique may even be of use in cases of severe calcification in the coronary artery wall.

Regional myocardial blood flow measured by stress multidetector computed tomography as a predictor of recovery of left ventricular function after coronary artery bypass grafting

BACKGROUND Multidetector-row computed tomography (MDCT) applications have expanded to evaluation of myocardial blood flow (MBF) and viability. We quantified regional MBF pre- and post-coronary artery bypass grafting (CABG) using adenosine stress and cardiac 64-MDCT, and investigated whether the results predict MBF and left ventricular (LV) function recovery after CABG. METHODS We studied 321 regions in 19 CABG patients who underwent adenosine stress 64-row MDCT perfusion imaging and cine magnetic resonance imaging pre- and post-CABG. Myocardial blood flow was estimated from linear regression equation slopes using Patlak plot analyses and compared with LV function by measuring wall thickening (%WT) using cine magnetic resonance imaging. RESULTS Overall mean MBFs were 1.39 +/- 0.49 and 1.95 +/- 0.49 mL/(g min) pre- and post-CABG (P < .0001). Myocardial blood flow in revascularized areas increased significantly (pre-CABG 1.18 +/- 0.45, post-CABG 1.99 +/- 0.66 mL/[g min], P < .001), whereas nonischemic areas showed no difference (1.79 +/- 0.70 and 1.97 +/- 0.46 mL/[g min], P = .14). Revascularized areas with preoperative MBF > or = 0.9 mL/(g min) showed significantly greater MBF improvement than those with preoperative MBF <0.9 mL/(g min) (P = .04). In patients with preoperative LV dysfunction (ejection fraction <40%), %WT in revascularized areas with pre-CABG MBF > or = 0.9 mL/(g min) improved significantly after CABG (pre-%WT 40.9 +/- 22.9, post-%WT 52.8 +/- 20.6, P = .03) versus those with pre-CABG MBF <0.9 mL/(g min) (pre-%WT 53.2 +/- 35.5, post-%WT 42.5 +/- 17.0, P = .40). CONCLUSIONS Our results demonstrated more significantly increased MBF post-CABG than pre-CABG, particularly in revascularized areas. Regional MBF before CABG may predict MBF and LV function recovery, in the short term, after CABG.