Alaa Mohamed

Composite nanofibers for highly efficient photocatalytic degradation of organic dyes from contaminated water

In this study highly efficient photocatalyst based on composite nanofibers containing polyacrylonitrile (PAN), carbon nanotubes (CNT), and surface functionalized TiO2 nanoparticles was developed. The composite nanofibers were fabricated using electrospinning technique followed by chemical crosslinking. The surface modification and morphology changes of the fabricated composite nanofibers were examined through SEM, TEM, and FTIR analysis. The photocatalytic performance of the composite nanofibers for the degradation of model molecules, methylene blue and indigo carmine, under UV irradiation in aqueous solutions was investigated. The results demonstrated that high photodegradation efficiency was obtained in a short time and at low power intensity compared to other reported studies. The effective factors on the degradation of the dyes, such as the amount of catalyst, solution pH and irradiation time were investigated. The experimental kinetic data were fitted using pseudo-first order model. The effect of the composite nanofibers as individual components on the degradation efficiency of MB and IC was evaluated in order to understand the overall photodegradation mechanism. The results obtained showed that all the components possess significant effect on the photodegradation activity of the composite nanofibers. The stability studies demonstrated that the photodegradation efficiency can remain constant at the level of 99% after five consecutive cycles.

Tribological Properties of Graphene Nanosheets as an Additive in Calcium Grease

ABSTRACT The addition of graphene nanosheets (GNSs) in lubricating grease could significantly reduce the interfacial friction and improve the load-bearing capacity of the parts. Therefore, it has been considered as having great potential as lubricant additives. In this study, we synthesized GNSs that are prepared by a modified Hummer method, and investigated the effect of GNS with different concentration (0.5%, 1%, 2%, 3%, and 4 wt%) on the tribological properties of the calcium grease. The friction and wear experiments were performed using a four-ball tribometer. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were employed to examine the GNS and the friction mechanisms. Results indicate that the friction reduction ability and anti-wear property of the base grease can be improved with the addition of GNS. It was also found that the friction reduction decreases by 61%, and the wear scar diameter (WSD) decreases by 45%, and the extreme-pressure (EP) properties increased 60% at 3 wt% GNS. It is clear that the GNS in grease easily forms protective deposited films to prevent the rubbing surfaces from coming into direct contact, thereby improving the entire tribological behavior of the grease. GRAPHICAL ABSTRACT

Tribological properties of dispersed carbon nanotubes in lubricant

ABSTRACT This study examined the tribological properties of two lubricating oils, mobil gear 627 and paraffinic mineral oils, with multi-walled carbon nanotubes (MWCNTs) nanoparticles used as additives with various concentrations (0.1, 0.5, 1, and 2 wt.%). The friction and wear experiments were performed using a four ball tribotester. The samples were tested for their anti-wear, load carrying capacity, and friction coefficients according to ASTM D-2783, ASTM D-2596, and ASTM D-5183 standards. The experimental results show that the addition of MWCNTs to base oils exhibit good friction reduction and anti-wear properties. The wear test results show a decreased wear by 68% and 39% in the case of MWCNTs-based mineral oil as compared with base mobil gear 627 and paraffinic mineral oils, respectively. Furthermore, the friction reduction results show a decrease of friction about 57% and 49% in the case of MWCNTs-based mineral oil as compared with base mobil gear 627 and paraffinic mineral oils, respectively. The weld load of the base oil containing 1% MWCNTs was found to be 400 kgf and 125 kgf as compared with base mobil gear 627 and paraffinic mineral oils, respectively, which got welded at 200 kgf and 100 kgf. The morphologies and typical element distribution of the worn surfaces were characterized by scanning electron microscope (SEM) and energy-dispersive X-ray (EDX). The SEM micrographs and EDX chemical analysis confirm the formation of a tribolayer composed of the elements from the nanoparticles.

Rheology and thermal conductivity of calcium grease containing multi-walled carbon nanotube

ABSTRACT Recently, nanofluids attract considerable interest for enhanced rheological behavior and thermal performance. The aim of this research is to study the influence of additives Multi-Walled Carbon Nanotubes (MWCNTs) on the rheological behavior and its structure, thermal conductivity, and the influence of shear thinning rate on oil separation at different temperatures for calcium grease. Various concentrations of MWCNTs (0.5, 1, 2, 3, and 4%) have been added to the grease to obtain the best percentages that improve the properties of nanofluid. The microstructure of MWCNTs and nanofluid were examined by X-ray diffraction (XRD), Transmission Electron Microscope (TEM), and Scanning Electron Microscope (SEM). These experimental investigations were evaluated with a Brookfield programmable Rheometer DV-III ULTRA. The results indicated that the optimum concentration of MWCNTs was 3%, and the dropping point increasing about 11%. The rheological behaviors of the nanofluids show that the grease with various concentrations of MWCNTs demonstrates non Newtonian behaviors and the results indicated that the shear stress, apparent viscosity and thermal conductivity increase with the increase of volume concentration of MWCNTs to 65%, 52%, and% 56, respectively.

Removal of chromium (VI) from aqueous solutions using surface modified composite nanofibers

A novel material composite nanofibers (PAN-CNT/TiO2-NH2) based on adsorption of Cr(VI) ions, was applied. Polyacrylonitrile (PAN) and carbon nanotube (CNTs)/titanium dioxide nanoparticles (TiO2) functionalized with amine groups (TiO2-NH2) composite nanofibers have been fabricated by electrospinning. The nanostructures and the formation process mechanism of the obtained PAN-CNT/TiO2-NH2 composite nanofibers are investigated using FTIR, XRD, XPS, SEM, and TEM. The composite nanofibers were used as a novel adsorbent for removing toxic chromium Cr(VI) in aqueous solution. The kinetic study, adsorption isotherm, pH effect, initial concentration, and thermodynamic study were investigated in batch experiments. The composite nanofibers had a positive effect on the absorption of Cr(VI) ions under neutral and acidic conditions, and the saturated adsorption reached the highest when pH was 2. The adsorption equilibrium reached within 30 and 180min with an initial solution concentration increasing from 10 to 300mg/L, and the process can be better described using nonlinear pseudo first than nonlinear pseudo second order model and Intra-particle diffusion. Isotherm data fitted well using linear and nonlinear Langmuir, Freundlich, Redlich-Peterson, and Temkin isotherm adsorption model. Thermodynamic study showed that the adsorption process is exothermic. The adsorption capacity can remain up to 80% after 5 times usage, which show good durability performance. The adsorption mechanism was also studied by UV-vis and XPS.

Rheological Behavior of Carbon Nanotubes as an Additive on Lithium Grease

The rheological behaviors of carbon nanotubes (CNTs) as an additive on lithium grease at different concentrations were examined under various settings of shear rate, shear stress, and apparent viscosity. The results indicated that the optimum content of the CNTs was 2%. These experimental investigations were evaluated with a Brookfield Programmable Rheometer DV-III ULTRA. The results indicated that the shear, stress and apparent viscosity increase with the increase of CNTs concentration. The microstructure of CNTs and lithium grease was examined by high resolution transmission electron microscope (HRTEM) and scanning electron microscope (SEM). The results indicated that the microscopic structure of the lithium grease presents a more regular and homogeneous network structure, with long fibers, which confirms the rheological stability.

Tribological behaviour of calcium grease containing carbon nanotubes additives

Purpose The purpose of this paper is to fabricate composite nanogrease for tribological applications. Multi-walled carbon nanotubes (MWCNTs) with a size 10 nm average diameter and 5 μm in length were used as additives to calcium grease. Design/methodology/approach The tribological four-ball machine was used to evaluate calcium grease with carbon nanotubes (CNTs) as an additive. The interaction between CNT and calcium grease (nanogrease) were studied by transmission electron microscopy and X-ray diffraction. Findings MWCNTs composite nanogrease was manufactured for tribological applications. The effectiveness of the fabricated grease in improving the tribological performance at different concentrations and under different loads was tested. The results are summarized as follows. CNT nanoparticle additive dispersed in calcium grease significantly improve its anti-wear performance, reducing friction, increasing load-carrying capacity and extreme pressure (EP) property. The friction is reduced by about 50 per cent, the wear scar diameter (WSD) decreased to 32 per cent and the EP properties increases about 38 per cent, with only 3 wt.%. The modified grease with CNTs additives of 3 wt.% showed the most favorable results. Energy dispersive x-ray (EDX) analysis shows that C was present on the worn scar surface, with atomic concentration of about 22 per cent. The presence of C suggests that a lubricating film is likely formed because of the presence of CNTs and very likely prevented the steel-to-steel direct contact. Originality/value The results indicated that a 3 wt.% of MWCNT nanogrease is an excellent antiwear, with EP and low friction coefficient. It was also found that the friction coefficient was reduced to about 50 per cent, the WSD decreased by about 32 per cent and the EP properties increased about 38 per cent. The mating surfaces were investigated with scanning electron microscopy and EDX. The results show that a boundary film mainly composed of CNTs, Cr and Fe was formed on the rubbed surfaces.

Experimental investigations of rheological behaviour and thermal conductivity of nanogrease

Purpose This work describes the fabrication of composite nanogrease based on carbon nanotubes (CNTs) as an additive at different volume concentrations 0, 0.5, 1, 2 and 3 Wt.% and investigates the correlation between CNTs and grease rheological behaviour. In addition, study the influence of shear thinning rate at various temperatures and investigates the thermal conductivity of nanogrease. The results demonstrated that grease behaves like a Newtonian viscoelastic material with a narrow linear domain. The thermal conductivity of nanogrease was enhanced by about 31.58 per cent, and the thermal and mechanical stabilities improved. Moreover, the apparent viscosity and dropping point increased by about 93 and 27 per cent, respectively. Design/methodology/approach Grease was dissolved in chloroform (10 Wt.%), at 25°C for 1 h. In parallel, functionalized CNTs with different volume concentrations (0.5, 1, 2 and 3 Wt.%) were dispersed in N,N-dimethylformamide; the dispersion was stirred for 15 min, and then sonicated (40 kHz, 150 W) for 30 min. Grease solution was then added to the CNTs. The nanofluid was magnetically stirred for 15 min and then sonicated for 2 h. This ensured uniform dispersion of nanoparticles in the base fluid. Findings Inexpensive and simple fabrication of nanogrease. Thermal conductivity of nanogrease was typically enhanced compared to other reported studies. Apparent viscosity and dropping point increases with the increase the volume concentration. Originality/value This work describes the inexpensive and simple fabrication of nanogrease for improving properties of lubricants, which improve power efficiency and extend lifetimes of mechanical equipment.

Rheological characteristics of modified calcium grease with graphene nanosheets

ABSTRACT The effect of graphene nanosheets (GNS) on the rheological characteristics and thermal conductivity of calcium grease used in marine applications, and water pumps for lower demanding applications, has been experimentally evaluated in this paper. Various volume fractions of GNS (0.5, 1, 2, 3, and 4% wt.) have been immersed in the grease aiming at finding the better percentages that improve the properties of nanogrease. The rheological characteristics and thermal conductivity were evaluated with a Brookfield Rheometer DV-III ULTRA and KD2 thermal analyzer, respectively. The results of the modified calcium grease indicated that the best concentration of GNS is 3% wt. The rheological characteristics of the grease with a different volume fraction of GNS indicated a non-Newtonian behavior. Thermal conductivity of nanogreas also increases with an increase of GNS volume fraction. Moreover, the apparent viscosity, shear stress and dropping point increase by 59%, 52%, and 65%, respectively, with increasing GNS volume fraction.

Photocatalytic degradation of organic dyes using composite nanofibers under UV irradiation

In this work, photocatalytic degradation of organic dyes such as methylene blue (MB) and indigo carmine (IC) have been studied by composite nanofibers systems containing cellulose acetate (CA), multiwall carbon nanotubes (CNT) and TiO2 nanoparticles under UV light. The amino factionalized TiO2–NH2 NPs cross-linked to the CA/CNT composite nanofibers works as a semiconductor catalyst. The morphology and crystallinity were characterized by scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction, and Fourier transform infrared spectroscopy. It was also seen that many factors affected the photodegradation rate, mainly the pH of the solution and the dye concentration, temperature, etc. The study demonstrated that IC degrades at a higher rate than MB. The maximum photodegradation rate of both organic dyes was achieved at a pH 2. In comparison to other studies, this work achieved high photodegradation rate in lower time and using less power intensity.