Alagarsamy Pandikumar

Graphene and its nanocomposite material based electrochemical sensor platform for dopamine

Dopamine (DA) is an important catecholamine neurotransmitter in the mammalian central nervous system that influences several physiological functions. The impact of DA levels within the human body significantly affects the body functions. Maintaining DA level is essential and the electrochemical detection methods are often used to detect the DA level to regulate the body function. In this review, graphene (functionalized graphene and N-doped graphene) and its composites (metal, metal oxide, polymer, carbonaceous materials, clay, zeolite, and metal–organic framework based graphene composites) modified electrodes with their improved sensing performance towards DA along with several interfering species are described. Further, recent developments on the fabrication of various graphene based composite modified electrodes are also presented. Some important strategies to improve the selectivity and sensitivity towards DA with graphene based composite modified electrodes are also described.

Highly exposed {001} facets of titanium dioxide modified with reduced graphene oxide for dopamine sensing.

Titanium dioxide (TiO2) with highly exposed {001} facets was synthesized through a facile solvo-thermal method and its surface was decorated by using reduced graphene oxide (rGO) sheets. The morphology and chemical composition of the prepared rGO/TiO2 {001} nanocomposite were examined by using suitable characterization techniques. The rGO/TiO2 {001} nanocomposite was used to modify glassy carbon electrode (GCE), which showed higher electrocatalytic activity towards the oxidation of dopamine (DA) and ascorbic acid (AA), when compared to unmodified GCE. The differential pulse voltammetric studies revealed good sensitivity and selectivity nature of the rGO/TiO2 {001} nanocomposite modified GCE for the detection of DA in the presence of AA. The modified GCE exhibited a low electrochemical detection limit of 6 μM over the linear range of 2–60 μM. Overall, this work provides a simple platform for the development of GCE modified with rGO/TiO2 {001} nanocomposite with highly exposed {001} facets for potential electrochemical sensing applications.

In-situ electrochemically deposited polypyrrole nanoparticles incorporated reduced graphene oxide as an efficient counter electrode for platinum-free dye-sensitized solar cells

This paper reports a rapid and in-situ electrochemical polymerization method for the fabrication of polypyrrole nanoparticles incorporated reduced graphene oxide (rGO@PPy) nanocomposites on a ITO conducting glass and its application as a counter electrode for platinum-free dye-sensitized solar cell (DSSC). The scanning electron microscopic images show the uniform distribution of PPy nanoparticles with diameter ranges between 20 and 30 nm on the rGO sheets. The electrochemical studies reveal that the rGO@PPy has smaller charge transfer resistance and similar electrocatalytic activity as that of the standard Pt counter electrode for the I3−/I− redox reaction. The overall solar to electrical energy conversion efficiency of the DSSC with the rGO@PPy counter electrode is 2.21%, which is merely equal to the efficiency of DSSC with sputtered Pt counter electrode (2.19%). The excellent photovoltaic performance, rapid and simple fabrication method and low-cost of the rGO@PPy can be potentially exploited as a alternative counter electrode to the expensive Pt in DSSCs.

Gold nanoparticle based optical and electrochemical sensing of dopamine

AbstractThis review (with 110 refs.) gives an overview on the progress that has been made in the past few years on the use of gold nanoparticles (AuNPs) for use in sensors and analytical tools for the determination of dopamine (DA). Both AuNPs and their composites with other organic and inorganic materials including noble metals are treated. Following an overview on the clinical significance of DA, we discuss the various analytical methods that are (a) electrochemiluminescence (ECL); (b) surface enhanced Raman scattering (SERS); (c) colorimetric probing and visual detection; and (d) the large class of electrochemical sensors. Subsections cover sensors based on plain AuNPs, bimetallic NPs, AuNP-metal@metal oxide nanocomposites, AuNP nanocomposites with organic polymers, AuNP nanocomposites with carbon nanotubes or with graphene, and finally sensors based on ternary materials containing AuNPs. The review ends with a conclusion on current challenges of sensors for DA and an outlook on future trends. Graphical AbstractWe review the recent progress in sensing dopamine based on AuNPs and its nanocomposites including bimetallic nanoparticles, AuNPs-/metal oxide, AuNPs-polymer, AuNPs-carbon nanotubes, AuNPs-graphene and ternary materials using different types of sensing techniques such as electrochemiluminescence (ECL), colorimetric, surface enhanced Raman scattering (SERS) and electrochemical techniques.

Enhanced photovoltaic performance of silver@titania plasmonic photoanode in dye-sensitized solar cells

In the present investigation, silver@titania (Ag@TiO2) plasmonic nanocomposite materials with different Ag content were prepared using a simple one-step chemical reduction method and used as a photoanode in high-performance dye-sensitized solar cells. Transmission electron microscopic images revealed the uniform distribution of ultra-small Ag nanoparticles with a particle size range of 2–4 nm on the TiO2 surface. The incorporation of Ag on the TiO2 surface significantly influenced the optical properties in the region of 400–500 nm because of the surface plasmon resonance effect. The dye-sensitized solar cells (DSSCs) assembled with the Ag@TiO2-modified photoanode demonstrated an enhanced solar-to-electrical energy conversion efficiency (4.86%) compared to that of bare TiO2 (2.57%), due to the plasmonic effect of Ag. In addition, the Ag nanoparticles acted as an electron sink, which retarded the charge recombination. The influence of the Ag content on the overall efficiency was also investigated, and the optimum Ag content with TiO2 was found to be 2.5 wt%. The enhanced solar energy conversion efficiency of the Ag@TiO2 nanocomposite makes it a promising alternative to conventional photoanode-based DSSCs.

Boosting Photovoltaic Performance of Dye-Sensitized Solar Cells Using Silver Nanoparticle-Decorated N,S-Co-Doped-TiO2 Photoanode

A silver nanoparticle-decorated N,S-co-doped TiO2 nanocomposite was successfully prepared and used as an efficient photoanode in high-performance dye-sensitized solar cells (DSSCs) with N719 dye. The DSSCs assembled with the N,S-TiO2@Ag-modified photoanode demonstrated an enhanced solar-to-electrical energy conversion efficiency of 8.22%, which was better than that of a DSSC photoanode composed of unmodified TiO2 (2.57%) under full sunlight illumination (100 mWcm−2, AM 1.5 G). This enhanced efficiency was mainly attributed to the reduced band gap energy, improved interfacial charge transfer, and retarded charge recombination process. The influence of the Ag content on the overall efficiency was also investigated, and the optimum Ag content with N,S-TiO2 was found to be 20 wt%. Because of the enhanced solar energy conversion efficiency of the N,S-TiO2@Ag nanocomposite, it should be considered as a potential photoanode for high-performance DSSCs.

Simultaneous Electrochemical Detection of Dopamine and Ascorbic Acid Using an Iron Oxide/Reduced Graphene Oxide Modified Glassy Carbon Electrode

The fabrication of an electrochemical sensor based on an iron oxide/graphene modified glassy carbon electrode (Fe3O4/rGO/GCE) and its simultaneous detection of dopamine (DA) and ascorbic acid (AA) is described here. The Fe3O4/rGO nanocomposite was synthesized via a simple, one step in-situ wet chemical method and characterized by different techniques. The presence of Fe3O4 nanoparticles on the surface of rGO sheets was confirmed by FESEM and TEM images. The electrochemical behavior of Fe3O4/rGO/GCE towards electrocatalytic oxidation of DA was investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) analysis. The electrochemical studies revealed that the Fe3O4/rGO/GCE dramatically increased the current response against the DA, due to the synergistic effect emerged between Fe3O4 and rGO. This implies that Fe3O4/rGO/GCE could exhibit excellent electrocatalytic activity and remarkable electron transfer kinetics towards the oxidation of DA. Moreover, the modified sensor electrode portrayed sensitivity and selectivity for simultaneous determination of AA and DA. The observed DPVs response linearly depends on AA and DA concentration in the range of 1–9 mM and 0.5–100 μM, with correlation coefficients of 0.995 and 0.996, respectively. The detection limit of (S/N = 3) was found to be 0.42 and 0.12 μM for AA and DA, respectively.

Functionalized Silicate Sol−Gel-Supported TiO2−Au Core−Shell Nanomaterials and Their Photoelectrocatalytic Activity

The N-[3-(trimethoxysilyl)propyl]ethylenediamine (EDAS) derived silicate matrix supported core-shell TiO(2)-Au nanoparticles (EDAS/(TiO(2)-Au)(nps)) were prepared by NaBH(4) reduction of HAuCl(4) precursor on preformed TiO(2) nanoparticles in the presence of EDAS monomer. The core-shell (TiO(2)-Au)(nps) nanoparticles were stabilized by the amine functional group of the EDAS silicate sol-gel network. The potential application of this EDAS/(TiO(2)-Au)(nps) modified electrode toward the photoelectrochemical oxidation of methanol was explored. The EDAS/(TiO(2)-Au)(nps) modified electrode showed a 12-fold enhancement in the catalytic activity toward photoelectrooxidation of methanol when compared to TiO(2) dispersed in EDAS silicate sol-gel matrix. This improved photoelectrochemical performance is explained on the basis of beneficial promotion of interfacial charge transfer processes of the EDAS/(TiO(2)-Au)(nps) nanocomposite. A methanol oxidation peak current density of 12.3 mA cm(-2) was achieved at an optimum loading of Au(nps) on TiO(2) particles. This novel amine functionalized EDAS silicate sol-gel stabilized core-shell (TiO(2)-Au)(nps) nanomaterial could be an excellent candidate for the photocatalytic and photoelectrochemical applications.

Magnetically separable reduced graphene oxide/iron oxide nanocomposite materials for environmental remediation

Magnetically separable reduced graphene oxide/iron oxide (rGO/Fe3O4) nanocomposite materials were synthesized at room temperature through a facile, eco-friendly and cost-effective approach. The prepared nanocomposite materials were characterized by different techniques. X-ray diffraction analysis revealed the formation of the rGO/Fe3O4 nanocomposites, while transmission electron microscope images showed that the Fe3O4 nanoparticles with an average size of 10 nm were embedded uniformly on the surface of rGO sheets. The synthesized rGO/Fe3O4 nanocomposite materials were found to be super-paramagnetic in nature at room temperature. The photocatalytic performance of the rGO/Fe3O4 nanocomposite materials was investigated under natural sunlight irradiation using methylene blue (MB) as a model target organic pollutant. The rGO/Fe3O4 showed better adsorption behaviour and excellent photocatalytic activity towards the degradation of MB, when compared to other samples such as rGO and pristine Fe3O4 nanoparticles. This enhanced photocatalytic activity could be attributed to the synergistic effect that arises between the rGO and Fe3O4, which significantly reduces charge recombination. Moreover, the rGO/Fe3O4 nanocomposite materials exhibited good sustainability, which was evidenced by their consistent photocatalytic performance and the absence of any observable changes in morphology, even after eight cycles of operation during photocatalytic experiments. The overall results of the study indicate that these newly prepared photocatalytically stable and magnetically separable rGO/Fe3O4 nanocomposites could be potentially utilized for many environmental remediation applications.

An electrochemical sensing platform based on a reduced graphene oxide–cobalt oxide nanocube@platinum nanocomposite for nitric oxide detection

We report a facile one-pot hydrothermal synthesis of a reduced graphene oxide–cobalt oxide nanocube@platinum (rGO–Co3O4@Pt) nanocomposite and its application toward the electrochemical detection of nitric oxide (NO). The rGO–Co3O4@Pt nanocomposite was characterized by field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) mapping, X-ray diffraction (XRD) and Raman analyses. The nanocomposite modified glassy carbon (GC) electrode was used for the electrochemical oxidation of nitric oxide (NO) and it showed better catalytic performance in terms of catalytic peak current and shift in overpotential when compared to those of rGO, Co3O4 nanocubes and rGO–Co3O4 nanocomposite modified electrodes. The rGO–Co3O4@Pt nanocomposite modified electrode showed a better sensing ability toward the in situ generated NO in NO2− containing phosphate buffer solution (PBS) than the other controlled modified electrodes. The Pt nanoparticles present in the nanocomposite could enhance the sensing performance and the limit of detection (LOD) was found to be 1.73 μM with a signal-to-noise (S/N) ratio of ∼3 using the amperometric i–t curve technique. Furthermore, the nanocomposite modified electrode showed selectivity toward the detection of NO in the presence of a 100-fold higher concentration of other physiologically important analytes. The proposed sensor was stable, reproducible and selective toward the detection of NO.