Alan R. Esker

Acid-catalyzed and solvolytic desulfation of H2SO4-hydrolyzed cellulose nanocrystals.

Cellulose nanocrystals (CNCs) prepared by H(2)SO(4) hydrolysis have sulfate groups on their surface, which have negative implications for some CNC applications. In this study, two desulfation methods were evaluated, and the properties of desulfated CNCs were compared to those of unsulfated CNCs, prepared by HCl hydrolysis. H(2)SO(4)-hydrolyzed CNCs from softwood sulfite pulp were subjected to either a mild acid hydrolytic desulfation or a solvolytic desulfation in dimethyl sulfoxide via the pyridinium salt. Removal of the sulfate groups was confirmed by conductometric titration and X-ray photoelectron spectroscopy. The effect of the desulfation procedure on the lateral crystallite dimensions was analyzed by X-ray diffraction. The extent of particle aggregation in the samples was assessed by atomic force microscopy and dynamic light scattering. The acid hydrolytic method achieved only partial desulfation and produced gradually decreasing sulfate contents upon successive repetition. The solvolytic method achieved nearly complete desulfation in a single step. The desulfated CNCs showed similar particle aggregation as the HCl-hydrolyzed CNCs, but the extent of aggregation was slightly less.

Cyclophilin 20-3 relays a 12-oxo-phytodienoic acid signal during stress responsive regulation of cellular redox homeostasis

The jasmonate family of phytohormones plays central roles in plant development and stress acclimation. However, the architecture of their signaling circuits remains largely unknown. Here we describe a jasmonate family binding protein, cyclophilin 20-3 (CYP20-3), which regulates stress-responsive cellular redox homeostasis. (+)-12-oxo-phytodienoic acid (OPDA) binding promotes CYP20-3 to form a complex with serine acetyltransferase 1, which triggers the formation of a hetero-oligomeric cysteine synthase complex with O-acetylserine(thiol)lyase B in chloroplasts. The cysteine synthase complex formation then activates sulfur assimilation that leads to increased levels of thiol metabolites and the buildup of cellular reduction potential. The enhanced redox capacity in turn coordinates the expression of a subset of OPDA-responsive genes. Thus, we conclude that CYP20-3 is a key effector protein that links OPDA signaling to amino acid biosynthesis and cellular redox homeostasis in stress responses.

Quartz crystal microbalance with dissipation monitoring and surface plasmon resonance studies of carboxymethyl cellulose adsorption onto regenerated cellulose surfaces.

Adsorption of anionic polyelectrolytes, sodium salts of carboxymethyl celluloses (CMCs) with different degrees of substitution (DS = 0.9 and 1.2), from aqueous electrolyte solutions onto regenerated cellulose surfaces was studied using quartz crystal microbalance with dissipation monitoring (QCM-D) and surface plasmon resonance (SPR) experiments. The influence of both calcium chloride (CaCl(2)) and sodium chloride (NaCl) on CMC adsorption was examined. The QCM-D results demonstrated that CaCl(2) (divalent cation) caused significantly greater CMC adsorption onto regenerated cellulose surfaces than NaCl (monovalent cation) at the same ionic strength. The CMC layers adsorbed onto regenerated cellulose surfaces from CaCl(2) solutions exhibited greater stability upon exposure to flowing water than layers adsorbed from NaCl solutions. Both QCM-D and SPR results showed that CMC adsorption onto regenerated cellulose surfaces from CaCl(2) solutions increased with increasing CaCl(2) concentration up to the solubility limit (10 mM). Voigt-based viscoelastic modeling of the QCM-D data indicated that the CMC layers adsorbed onto regenerated cellulose surfaces had shear viscosities of η(f) ≈ 10(-3) N·s·m(-2) and elastic shear moduli of μ(f) ≈ 10(5) N·m(-2). Furthermore, the combination of SPR spectroscopy and QCM-D showed that the CMC layers contained 90-95% water. Adsorption isotherms for CMCs in CaCl(2) solutions were also obtained from QCM-D and were fit by Freundlich isotherms. This study demonstrated that CMC adsorption from CaCl(2) solutions is useful for the modification of cellulose surfaces.

Equilibrium Water Contents of Cellulose Films Determined via Solvent Exchange and Quartz Crystal Microbalance with Dissipation Monitoring

Model cellulose surfaces have attracted increasing attention for studying interactions with cell wall matrix polymers and as substrates for enzymatic degradation studies. Quartz crystal microbalance with dissipation monitoring (QCM-D) solvent exchange studies showed that the water content of regenerated cellulose (RC) films was proportional to the film thickness (d) and was consistent with about five water molecules per anhydroglucose unit. Sulfated nanocrystalline cellulose (SNC) and desulfated nanocrystalline cellulose (DNC) films had comparable water contents and contained about five times more water than RC films. A cellulase mixture served as a probe for studies of substrate accessibility and degradation. Cellulase adsorption onto RC films was independent of d, whereas degradation times increased with d. However, adsorption onto SNC and DNC films increased with d, whereas cellulase degradation times for DNC films were independent of studied d. Enhanced access to guest molecules for SNC and DNC films revealed they are more porous than RC films.

Role of (1,3)(1,4)-β-Glucan in Cell Walls: Interaction with Cellulose

(1,3)(1,4)-β-D-Glucan (mixed-linkage glucan or MLG), a characteristic hemicellulose in primary cell walls of grasses, was investigated to determine both its role in cell walls and its interaction with cellulose and other cell wall polysaccharides in vitro. Binding isotherms showed that MLG adsorption onto microcrystalline cellulose is slow, irreversible, and temperature-dependent. Measurements using quartz crystal microbalance with dissipation monitoring showed that MLG adsorbed irreversibly onto amorphous regenerated cellulose, forming a thick hydrogel. Oligosaccharide profiling using endo-(1,3)(1,4)-β-glucanase indicated that there was no difference in the frequency and distribution of (1,3) and (1,4) links in bound and unbound MLG. The binding of MLG to cellulose was reduced if the cellulose samples were first treated with certain cell wall polysaccharides, such as xyloglucan and glucuronoarabinoxylan. The tethering function of MLG in cell walls was tested by applying endo-(1,3)(1,4)-β-glucanase to wall samples in a constant force extensometer. Cell wall extension was not induced, which indicates that enzyme-accessible MLG does not tether cellulose fibrils into a load-bearing network.

Neutron Reflectometry and QCM-D Study of the Interaction of Cellulases with Films of Amorphous Cellulose

Improving the efficiency of enzymatic hydrolysis of cellulose is one of the key technological hurdles to reduce the cost of producing ethanol and other transportation fuels from lignocellulosic material. A better understanding of how soluble enzymes interact with insoluble cellulose will aid in the design of more efficient enzyme systems. We report a study involving neutron reflectometry (NR) and quartz crystal microbalance with dissipation monitoring (QCM-D) of the interaction of a fungal enzyme extract ( T. viride ) and an endoglucanse from A. niger with amorphous cellulose films. The use of amorphous cellulose is motivated by that the fact that several biomass pretreatments currently under investigation disrupt the native crystalline structure of cellulose and increase the amorphous content. NR reveals the profile of water through the film at nanometer resolution and is highly sensitive to interfacial roughness, whereas QCM-D provides changes in mass and film stiffness. NR can be performed using either H(2)O- or D(2)O-based aqueous reservoirs. NR measurement of swelling of a cellulose film in D(2)O and in H(2)O revealed that D/H exchange on the cellulose chains must be taken into account when a D(2)O-based reservoir is used. The results also show that cellulose films swell slightly more in D(2)O than in H(2)O. Regarding enzymatic digestion, at 20 °C in H(2)O buffer the T. viride cocktail rapidly digested the entire film, initially roughening the surface, followed by penetration and activity throughout the bulk of the film. In contrast, over the same time period, the endoglucanase was active mainly at the surface of the film and did not increase the surface roughness.

Effects of sulfate groups on the adsorption and activity of cellulases on cellulose substrates.

Pretreatment of lignocellulosic biomass with sulfuric acid may leave sulfate groups on its surface that may hinder its biochemical conversion. This study investigates the effects of sulfate groups on cellulase adsorption onto cellulose substrates and the enzymatic hydrolysis of these substrates. Substrates with different sulfate group densities were prepared from H2SO4- and HCl-hydrolyzed and partially and fully desulfated cellulose nanocrystals. Adsorption onto and hydrolysis of the substrates was analyzed by quartz crystal microbalance with dissipation monitoring (QCM-D). The surface roughness of the substrates, measured by atomic force microscopy, increased with decreasing sulfate group density, but their surface accessibilities, measured by QCM-D H2O/D2O exchange experiments, were similar. The adsorption of cellulose binding domains onto sulfated substrates decreased with increasing sulfate group density, but the adsorption of cellulases increased. The rate of hydrolysis of sulfated substrates decreased with increasing sulfate group density. The results indicated an inhibitory effect of sulfate groups on the enzymatic hydrolysis of cellulose, possibly due to nonproductive binding of the cellulases onto the substrates through electrostatic interactions instead of their cellulose binding domains.

Ultrathin chitin films for nanocomposites and biosensors.

Chitin is the second most abundant biopolymer and insight into its natural synthesis, enzymatic degradation, and chemical interactions with other biopolymers is important for bioengineering with this renewable resource. This work is the first report of smooth, homogeneous, ultrathin chitin films, opening the door to surface studies of binding interactions, adsorption kinetics, and enzymatic degradation. The chitin films were formed by spincoating trimethylsilyl chitin onto gold or silica substrates, followed by regeneration to a chitin film. Infrared and X-ray photoelectron spectroscopy, X-ray diffraction, ellipsometry, and atomic force microscopy were used to confirm the formation of smooth, homogeneous, and amorphous chitin thin films. Quartz crystal microbalance with dissipation monitoring (QCM-D) solvent exchange experiments showed these films swelled with 49% water by mass. The utility of these chitin films as biosensors was evident from QCM-D and surface plasmon resonance studies that revealed the adsorption of a bovine serum albumin monolayer.

Surface plasmon resonance studies of pullulan and pullulan cinnamate adsorption onto cellulose.

Surface plasmon resonance studies showed pullulan cinnamates (PCs) with varying degrees of substitution (DS) adsorbed onto regenerated cellulose surfaces from aqueous solutions below their critical aggregation concentrations. Results on cellulose were compared to PC adsorption onto hydrophilic and hydrophobic self-assembled thiol monolayers (SAMs) on gold to probe how different interactions affected PC adsorption. PC adsorbed onto methyl-terminated SAMs (SAM-CH(3)) > cellulose > hydroxyl-terminated SAMs (SAM-OH) for high DS and increased with DS for each surface. Data for PC adsorption onto cellulose and SAM-OH surfaces were effectively fit by Langmuir isotherms; however, Freundlich isotherms were required to fit PC adsorption isotherms for SAM-CH(3) surfaces. Atomic force microscopy images from the solid/liquid interfaces revealed PC coatings were uniform with surface roughnesses <2 nm for all surfaces. This study revealed hydrogen bonding alone could not explain PC adsorption onto cellulose and hydrophobic modification of water-soluble polysaccharides was a facile strategy for their conversion into surface modifying agents.

Interactions of endoglucanases with amorphous cellulose films resolved by neutron reflectometry and quartz crystal microbalance with dissipation monitoring

A study of the interaction of four endoglucanases with amorphous cellulose films by neutron reflectometry (NR) and quartz crystal microbalance with dissipation monitoring (QCM-D) is reported. The endoglucanases include a mesophilic fungal endoglucanase (Cel45A from H. insolens), a processive endoglucanase from a marine bacterium (Cel5H from S. degradans ), and two from thermophilic bacteria (Cel9A from A. acidocaldarius and Cel5A from T. maritima ). The use of amorphous cellulose is motivated by the promise of ionic liquid pretreatment as a second generation technology that disrupts the native crystalline structure of cellulose. The endoglucanases displayed highly diverse behavior. Cel45A and Cel5H, which possess carbohydrate-binding modules (CBMs), penetrated and digested within the bulk of the films to a far greater extent than Cel9A and Cel5A, which lack CBMs. While both Cel45A and Cel5H were active within the bulk of the films, striking differences were observed. With Cel45A, substantial film expansion and interfacial broadening were observed, whereas for Cel5H the film thickness decreased with little interfacial broadening. These results are consistent with Cel45A digesting within the interior of cellulose chains as a classic endoglucanase, and Cel5H digesting predominantly at chain ends consistent with its designation as a processive endoglucanase.