Alan Reynolds
Brunel University London
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Alan Reynolds.
Science & Justice | 2010
Benjamin Jones; Alan Reynolds; M. Richardson; Vaughn G. Sears
Titanium dioxide based powders are regularly used in the development of latent fingerprints on dark surfaces. For analysis of prints on adhesive tapes, the titanium dioxide can be suspended in a surfactant and used in the form of a powder suspension. Commercially available products, whilst having nominally similar composition, show varying levels of effectiveness of print development, with some powders adhering to the background as well as the print. X-ray fluorescence (XRF), analytical transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and laser particle sizing of the fingerprint powders show TiO(2) particles with a surrounding coating, tens of nanometres thick, consisting of Al and Si rich material, with traces of sodium and sulphur. Such aluminosilicates are commonly used as anti-caking agents and to aid adhesion or functionality of some fingerprint powders; however, the morphology, thickness, coverage and composition of the aluminosilicates are the primary differences between the white powder formulations and could be related to variation in the efficacy of print development.
Analyst | 2014
Nicola Attard-Montalto; Jesus J. Ojeda; Alan Reynolds; Mahado Ismail; Melanie J. Bailey; Lisette Doodkorte; Marcel de Puit; Benjamin Jones
This study thoroughly explores the use of time-of-flight secondary ion mass spectrometry (ToF-SIMS) for determining the deposition sequence of fingermarks and ink on a porous paper surface. Our experimental work has demonstrated that mapping selected endogenous components present in natural fingermarks enables the observation of friction ridges on a laser-printed surface, only when a fingerprint is deposited over this layer of ink. Further investigations have shown limited success on ink-jet printing and ballpoint pen inks. 51 blind tests carried out on natural, latent fingermarks on laser-printed surfaces; up to 14th depletion with samples aged for up to 421 days have resulted in a 100% success rate. Development with ninhydrin was found to affect the fingermark residue through mobilisation of ions, therefore sequencing determination was compromised; whilst iodine fuming and 1,2-indanedione developers did not. This implied that selected development methods affected success in fingermark-ink deposition order determination. These results were further corroborated through inter-laboratory validation studies. The adopted protocol and extensive series of tests have therefore demonstrated the effectiveness and limitations of ToF-SIMS in providing chronological sequencing information of fingermarks on questioned documents; successfully resolving this order of deposition query.
Central European Journal of Chemistry | 2011
Przemysław Sielicki; Helena Janik; Agnieszka Guzman; Alan Reynolds; Jacek Namieśnik
In years 2006–2010 particulate matter analysis was undertaken for dust samples collected from Gdansk and London area in order to compare their morphology and composition. Part of those studies was devoted to analysis of particulate matter (PM) bearing metals. Characterization of the morphology and size of the particles collected onto the filters was performed using a scanning electron microscope (SEM) and transmission electron microscope (TEM). Both electron microscopes were equipped with energy dispersive X-ray spectrometers to identify the elemental composition of the particles. On analysis of the X-ray spectra acquired by both TEM and SEM, the particles were divided into 10 groups as follows: Al-rich, Ba-rich, C-rich, Ca-rich, Cl-rich, Fe-rich, Mg-rich, Na-rich, S-rich, Si-rich. Speciation of the particles based on the major element and accompanying minor elements yielded 34 particle types. However, some pairs of elements repeat, for instance: Na-Cl and Cl-Na, Al-S and S-Al, Si-Al and Al-Si, S-Ca and Ca-S. These are undoubtedly the same types of particles; variation in peak heights of the major and minor elements is normal in a mixed particle population.
Chemical Communications | 2015
Nikhil Lalwani; Yu-Su Chen; Gemma Brooke; Neil Cross; David W. Allen; Alan Reynolds; Jesus J. Ojeda; Graham J. Tizzard; Simon J. Coles; Neil Bricklebank
Two new triphenylarsonium alkylthiolate precursors, a thiosulfate zwitterion and a thioacetate salt, have been structurally characterised and their cytotoxicity evaluated against PC3 cells. The arsonium compounds have been used to prepare gold nanoparticles decorated with triphenylarsonium groups.
Botanical Journal of the Linnean Society | 2015
Lourdes López-Merino; Suzanne A.G. Leroy; Sylvi Haldorsen; Manfred Heun; Alan Reynolds
The domestication of the one-grained einkorn (Triticum monococcum) in the Near East is relatively well known. However, an independent two-grained einkorn-like domestication has been archaeobotanically detected and scarce information is available. Triticum urartu, a wild wheat, was not fully described until the 1970s because the phenology does not allow it to be distinguished easily from wild einkorn (Triticum boeoticum subsp. thaoudar), although a genetic separation exists. Both species are mostly two grained and could potentially be the relatives of the extinct two-grained form. Pollen grains of several genetically well-identified wheat species, including T. urartu and T. boeoticum subsp. thaoudar, were studied by measuring the grain diameter and examining the exine sculpturing with phase-contrast microscopy and scanning electron microscopy to gain an insight into differences enabling taxonomic identification. This work showed that, although T. urartu pollen is smaller on average, grain diameter is not sufficient because of the size overlap between the species, but T. urartu presents a different exine sculpturing (scabrate) from other Triticum spp. (aerolate). This outcome is useful for taxonomists and archaeobotanists. First, it will allow a simple re-classification of herbarium materials. Second, further research could establish whether T. urartu was cultivated.
Environmental Pollution | 2018
Jiana Li; Christopher Green; Alan Reynolds; Huahong Shi; Jeanette M. Rotchell
Global contamination of the marine environment by plastic has led to the discovery of microplastics in a range of marine species, including those for human consumption. In this study, the presence of microplastics and other anthropogenic debris in seawater and mussels (Mytilus edulis) from coastal waters of the U.K., as well as supermarket sources, was investigated. These were detected in all samples from all sites with spatial differences observed. Seawater samples taken from 6 locations (in triplicates) displayed 3.5 ± 2.0 debris items/L on average (range: 1.5-6.7 items/L). In wild mussels sampled from 8 locations around the U.K. coastal environment, the number of total debris items varied from 0.7 to 2.9 items/g of tissue and from 1.1 to 6.4 items/individual. For the supermarket bought mussels, the abundance of microplastics was significantly higher in pre-cooked mussels (1.4 items/g) compared with mussels supplied live (0.9 items/g). Micro-FT-IR spectroscopy was conducted on 136 randomly selected samples, with 94 items characterized. The spectra found that 50% of these debris items characterized were microplastic, with an additional 37% made up of rayon and cotton fibers. The microplastic levels detected in the supermarket bought mussels present a route for human exposure and suggests that their quantification be included as food safety management measures as well as for environmental monitoring health measures.
Materials Science and Engineering: C | 2015
Anjana Kothandaraman; Tony Anson; Alan Reynolds
Coronary Artery Stents have been the preferred form of treatment for vascular occlusive disease, due to the minimally invasive surgical procedure, post-operative recovery time and cost, when compared to open coronary bypass surgery. The cellular response upon applying an AC electric field to type 316LM Stainless Steel stent mimics was investigated in this paper. The highest RBC adhesion was observed at voltages higher than 88 mV and lower than 74 mV. Their unique alignment along the lines of fracture on the stent surface at 88 mV was a phenomenon caused by an increase in electrical conductivity in these regions. Being able to control RBC adhesion may have various clinical implications such as inhibition of thrombus formation, and provide a basis to analyse whether electric fields may be applied to cancer therapy as well.
Facies | 2007
Steve Kershaw; Yue Li; Sylvie Crasquin-Soleau; Qinglai Feng; Xinan Mu; Pierre-Yves Collin; Alan Reynolds; Li Guo
Diamond and Related Materials | 2010
Benjamin Jones; A Mahendran; Aw Anson; Alan Reynolds; R. Bulpett; J. Franks
Journal of Asian Earth Sciences | 2009
Xinan Mu; Steve Kershaw; Yue Li; Li Guo; Yuping Qi; Alan Reynolds