Albert J. Jin

Water permeability of polyunsaturated lipid membranes measured by 17O NMR.

Diffusion-controlled water permeation across bilayers of polyunsaturated phospholipids was measured by 17O nuclear magnetic resonance. In 100-nm extruded liposomes containing 50 mM MnCl2, water exchange between internal and external solutions was monitored via changes in the linewidth of the 17O water resonance of external water. Liposome size and shape were characterized by light scattering methods and determination of liposome trapped volume. At 25 degrees C, the following water permeability coefficients were determined: 18:0-18:1n-9 PC, 155 +/- 24 microns/s; 18:0-18:3n-3 PC, 330 +/- 88 microns/s; and 18:0-22:6n-3 PC, 412 +/- 91 microns/s. The addition of 1 M ethanol reduced permeability coefficients to 66 +/- 15 microns/s for 18:0-18:1n-9 PC and to 239 +/- 67 microns/s for 18:0-22:6n-3 PC. Furthermore, the addition of 50 mol% 18:1n-9-18:1n-9 PE reduced the water permeability from 122 +/- 21 microns/s for pure 18:1n-9-18:1n-9 PC to 74 +/- 15 microns/s for the mixture. The significant increase in water permeation for membranes with polyunsaturated hydrocarbon chains correlates with looser packing of polyunsaturated lipids at the lipid-water interface and the suggested deeper penetration of water into these bilayers. Ethanol may block water diffusion pathways by occupying points of water entry into bilayers at the interface. The addition of dioleoylphosphatidylethanolamine increases lipid packing density and, consequently, reduces permeation rates.

Dye Loaded Ferritin Nanocages for Multimodal Imaging and Photothermal Therapy

Multimodal imaging-guided photothermal therapy (PTT), for the therapy of cancer, based on a ferritin (FRT) nanocage loaded with the near-infrared dye IR820 (designated DFRT) is demonstrated. The dual roles of DFRT (in imaging and PTT) are successfully balanced by using two different excitation wavelengths: 550 nm for high quantum-yield fluorescence imaging on the one hand and 808 nm for photoacoustic imaging and PTT with high photothermal conversion efficiency on the other.

Nanoscopic Lipid Domain Dynamics Revealed by Atomic Force Microscopy

Intrinsic heterogeneities, represented as domain formations in biological membranes, are important to both the structure and function of the membranes. We observed domain formations in mixed lipid bilayers of dipalmitoylphosphatidylcholine (DPPC), dilauroylphosphatidylcholine (DLPC), and cholesterol (chol) in a fluid environment using an atomic force microscope (AFM). At room temperature, we demonstrated that both microscopic and nanoscopic domains coexist and the DPPC-rich domain is approximately 1.4 nm higher than the surrounding DLPC-rich membrane areas as a consequence of intrinsic phase differences. DPPC-rich microscopic domains became larger as DPPC concentration increased. In cholesterol-free mixtures, nanoscopic DPPC-rich domain sizes ranged from 26 to 46 nm depending on phospholipid concentration. Domain size varied between 33 and 48 nm in the presence of cholesterol (0 < or = [chol] < or = 40). The nanoscopic domains were markedly fragmented near [chol] = 0.135 and appeared to fuse more readily into microscopic domains at higher and lower [chol]. By phase balance analyses we demonstrated phase behavior differences between a free-vesicle GUV system studied by confocal light microscopy and a supported membrane system studied by AFM. We propose a new three-dimensional phase diagram elucidating the effects of a solid substrate support on lipid phase behavior relevant to complex membrane phase phenomena in biological systems.

Local 3D matrix microenvironment regulates cell migration through spatiotemporal dynamics of contractility-dependent adhesions

The physical properties of two-dimensional (2D) extracellular matrices (ECMs) modulate cell adhesion dynamics and motility, but little is known about the roles of local microenvironmental differences in three-dimensional (3D) ECMs. Here we generate 3D collagen gels of varying matrix microarchitectures to characterize their regulation of 3D adhesion dynamics and cell migration. ECMs containing bundled fibrils demonstrate enhanced local adhesion-scale stiffness and increased adhesion stability through balanced ECM/adhesion coupling, whereas highly pliable reticular matrices promote adhesion retraction. 3D adhesion dynamics are locally regulated by ECM rigidity together with integrin/ECM association and myosin II contractility. Unlike 2D migration, abrogating contractility stalls 3D migration regardless of ECM pore size. We find force is not required for clustering of activated integrins on 3D native collagen fibrils. We propose that efficient 3D migration requires local balancing of contractility with ECM stiffness to stabilize adhesions, which facilitates the detachment of activated integrins from ECM fibrils.

Gold Nanoparticle-Based Activatable Probe for Sensing Ultralow Levels of Prostate-Specific Antigen

It is still in high demand to develop extremely sensitive and accurate clinical tools for biomarkers of interest for early diagnosis and monitoring of diseases. In this report, we present a highly sensitive and compatible gold nanoparticle (AuNP)-based fluorescence-activatable probe for sensing ultralow levels of prostate-specific antigen (PSA) in patient serum samples. The limit of detection of the newly developed probe for PSA was pushed down to 0.032 pg/mL, which is more than 2 orders of magnitude lower than that of the conventional fluorescence probe. The ultrahigh sensitivity of this probe was attributed to the high loading efficiency of the dyes on AuNP surfaces and high fluorescence quenching-unquenching abilities of the dye-AuNP pairs. The efficiency and robustness of this probe were investigated in patient serum samples, demonstrating the great potential of this probe in real-world applications.

Structure of the Plasmodium falciparum Circumsporozoite Protein, a Leading Malaria Vaccine Candidate

The Plasmodium falciparum circumsporozoite protein (CSP) is critical for sporozoite function and invasion of hepatocytes. Given its critical nature, a phase III human CSP malaria vaccine trial is ongoing. The CSP is composed of three regions as follows: an N terminus that binds heparin sulfate proteoglycans, a four amino acid repeat region (NANP), and a C terminus that contains a thrombospondin-like type I repeat (TSR) domain. Despite the importance of CSP, little is known about its structure. Therefore, recombinant forms of CSP were produced by expression in both Escherichia coli (Ec) and then refolded (EcCSP) or in the methylotrophic yeast Pichia pastoris (PpCSP) for structural analyses. To analyze the TSR domain of recombinant CSP, conformation-dependent monoclonal antibodies that recognized unfixed P. falciparum sporozoites and inhibited sporozoite invasion of HepG2 cells in vitro were identified. These monoclonal antibodies recognized all recombinant CSPs, indicating the recombinant CSPs contain a properly folded TSR domain structure. Characterization of both EcCSP and PpCSP by dynamic light scattering and velocity sedimentation demonstrated that both forms of CSP appeared as highly extended proteins (Rh 4.2 and 4.58 nm, respectively). Furthermore, high resolution atomic force microscopy revealed flexible, rod-like structures with a ribbon-like appearance. Using this information, we modeled the NANP repeat and TSR domain of CSP. Consistent with the biochemical and biophysical results, the repeat region formed a rod-like structure about 21–25 nm in length and 1.5 nm in width. Thus native CSP appears as a glycosylphosphatidylinositol-anchored, flexible rod-like protein on the sporozoite surface.

Fabrication of hydrogels with steep stiffness gradients for studying cell mechanical response.

Many fundamental cell processes, such as angiogenesis, neurogenesis and cancer metastasis, are thought to be modulated by extracellular matrix stiffness. Thus, the availability of matrix substrates having well-defined stiffness profiles can be of great importance in biophysical studies of cell-substrate interaction. Here, we present a method to fabricate biocompatible hydrogels with a well defined and linear stiffness gradient. This method, involving the photopolymerization of films by progressively uncovering an acrylamide/bis-acrylamide solution initially covered with an opaque mask, can be easily implemented with common lab equipment. It produces linear stiffness gradients of at least 115 kPa/mm, extending from ∼1 kPa to 240 kPa (in units of Youngs modulus). Hydrogels with less steep gradients and narrower stiffness ranges can easily be produced. The hydrogels can be covalently functionalized with uniform coatings of proteins that promote cell adhesion. Cell spreading on these hydrogels linearly correlates with hydrogel stiffness, indicating that this technique effectively modifies the mechanical environment of living cells. This technique provides a simple approach that produces steeper gradients, wider rigidity ranges, and more accurate profiles than current methods.

Acetylcholinesterase‐Catalyzed Hydrolysis Allows Ultrasensitive Detection of Pathogens with the Naked Eye

Major State Basic Research Development Program of China (973 Program) [2013CB733802, 2014CB744503]; National Science Foundation of China (NSFC) [81101101, 51273165, 81201086, 81201190, 81371596]; Key Project of the Chinese Ministry of Education [212149]; Intramural Research Program (IRP) of the National Institute of Biomedical Imaging and Bioengineering (NIBIB); National Institutes of Health (NIH); NIH-NIBIB/NIST NRC

Enhanced Mechanical Rigidity of Hydrogels Formed From Enantiomeric Peptide Assemblies

Chirality can be used as a design tool to control the mechanical rigidity of hydrogels formed from self-assembling peptides. Hydrogels prepared from enantiomeric mixtures of self-assembling β-hairpins show nonadditive, synergistic, enhancement in material rigidity compared to gels prepared from either pure enantiomer, with the racemic hydrogel showing the greatest effect. CD spectroscopy, TEM, and AFM indicate that this enhancement is defined by nanoscale interactions between enantiomers in the self-assembled state.

A nanoscale graphene oxide-peptide biosensor for real-time specific biomarker detection on the cell surface.

A nanoscale RGD-pyrene-graphene oxide (GO) biosensor was prepared for real-time in situ detection of a cancer cell surface marker, integrin αvβ3. This nanoscale GO-based biosensor is simple, robust, sensitive and of high selectivity. It can also be adapted to other cancer cell surface marker evaluation systems.